I have a workbook (see attach) That has 2 worksheets. (LOAD DATA AND SKIP) What I would like to do is have VBA that automatically filters for each of the names in column A, creates a new workbook naming the workbook as the filtered name (ex D Fowler) and current date and then copy in all info based off filtered data from columns A thru Y Then save and close for each of the names in column A.
View 6 RepliesI have a workbook which contains a list of data on the first worksheet. I need for a macro to copy the name in each row,along with its data in that row and paste it into the corresponding locations on a template located on another worksheet. It would then save the file using the date (col. a) , then the words " Scorecard for" and then the name (col. b), then loop for each row until it reaches the end of the list.
I located this code here here.However I dont know how to modify it to fit my needs. I dont have 2 separate categories for two score cards in column b. It would all run off one scorecard and each row of data.
[Code] .....
I would like to know how to create a validation based on a list, but with filtered. I have an employee sheet and another sheet to select the names but only according to a specific job.
View 7 Replies View RelatedI have a sheet of data that I can filter (e.g. only show male pupils).
On the next sheet I want to display the list of filtered results with no gaps.
As the user will be able to select which column of data to show from the first sheet I am referencing it as follows:
INDIRECT("'Progress Matrix'!"&ADDRESS(MATCH($B$6, 'Progress Matrix'!$A:$A, 0)+1,
MATCH(C$6, 'Progress Matrix'!$1:$1, 0))&":"&ADDRESS(300, MATCH(C$6, 'Progress Matrix'!$1:$1, 0))))
(However this formula no longer seems to work as I think I changed something).
I've tried to incorporate
SUBTOTAL(3,OFFSET(A2,ROW(A2:A100)-ROW(A2),0))
to only show filtered results but with no success.
Progress Tracker.xlsm
I used the code below to successfully create workbooks from the filtered list using the below code provided on this forum (see link below). The only problem is that I want the resulting columns to fit to width.
Looping Through A Range - Use Result As Criteria In A Filter
I want to write a piece of code where each day i run this code
I want add a workbook
Copy range ("A1:C5") to this new workbook
Save new workbook in a particular folder with the name customer data and todays date and save as CSV file
I run this this code every day so it should only add todays date at the end for filename
If for some reason I run this code again in the same day..
I want to have a msgbox stTing you have already ran this code today and exit sub
Im trying to create a macro that when i click the button a new workbook is created and saved as the value from C5 cell.
View 9 Replies View RelatedI have a workbook with roughly 28 tabs(sheets) and i need to be able to run a macro that will create a new sheet for each tab and name it based on the tab name.
View 9 Replies View RelatedSo I have a guest list workbook. There are two sheets. On the first one is a list of names on Column A. On Column B is a classification: 'C' if confirmed; "D" for declined; "I" for pending. I want to have all the names with "C" on sheet 1 appear on sheet 2 automatically.
View 4 Replies View RelatedI have code to create a new workbook, and when I try to rename it I get "Compile error: Can't assign to read-only property."
Dim objXlApp As Object
Dim wkb As Workbook
Dim wks As Worksheet
Set objXlApp = CreateObject("Excel.Application")
' Create a workbook
Set wkb = objXlApp.Workbooks.Add
' Delete all worksheets bar the first one.
For Each wks In wkb.Worksheets
If Not wks.Index = 1 Then
wks.Delete
End If
Next wks
'Create some worksheets and names
With wkb
.Worksheets(1).Name = "myWorksheet1"
.Worksheets.Add.Name = "myWorksheet2"
.Worksheets.Add.Name = "myWorksheet3"
.Worksheets.Add.Name = "myWorksheet4"
End With...................................
Read “My Documents” Path And Use Result
Problem:
Note:
Typical user OS will be Windows XP Pro / Win 2K
Excel version : 97 / 2002 / 2003
1. Corporate network security settings will only allow directory/subdirectory creation in the “My Documents” section of customers individual computers.
2. Per customer request, VBA application needs to save extracted files for future use.
3. I can specify an initial “My Documents” subdirectory be made and the VBA application file be loaded/copied into that location – i.e. – “My DocumentsCat”.
4. When VBA application is opened from that specified directory, (first time), the application needs to make an additional subdirectory tree to save future files. I can read the opened from location via VBA with the following:
Dim filepath As String
filepath = ThisWorkbook.Path
As an example – this code would produce a string definition of “filepath” – such as the following:............................
I have a spreadsheet called contacts which is as it says, I have another sheet called project management, I want to have a drop down list which refers back to the contacts spreadsheet, it this possible as they are two different files?
View 4 Replies View RelatedI am after some code to create a new worksheet called 'xxxx' in my workbook, and then list all the sheets within the workbook (excluding the newly created 'xxxx' sheet.)
View 4 Replies View RelatedI need to create a macro that can produce a new workbook with the list of the most recent users of my company, so that we can print their membership cards.
From my company's admin I can export the complete list of users with their name, serial number and address. Every time we export this list, the file is saved as "userdata-dd-mm-yyyy.xls", and "dd-mm-yyyy" as today
However, I would like to create a macro that would
1) open the most recent "userdata-dd-mm-yyyy.xls" workbook in the folder,
2) compare the user numbers in this file with the most recent "card_order-dd-mm-yyyy.xls" and
3) produce a new "card_order-dd-mm-yyyy.xls" workbook with the list of all new users since the last "card_order-dd-mm-yyyy.xls" ("dd-mm-yyyy" as today), based on the highest number for user number (this is a continuous list)
Note, the "userdata-dd-mm-yyyy.xls" workbook has name, serial number, address, expiration date and user number as columns.... but the extracted info to "card_order-dd-mm-yyyy.xls" is just of the name, serial number and expiration date.
What is the easiest way of doing so and what code should I use for the macro?
what code can be used to be place in a Command Button on a worksheet that will use the value in a cell, change it to the directory where it have to be saved and save it to the value of another cell. Example:
On a worksheet called "Customer", at cel A1 will be the customer's name and at cell A2 will be the asset number. Now let's say a directory does not yet exist on the root for this customer, a new directory must be created in the root directory by using the name in A1, and the workbook must then be copied and saved under the value of A2.
I need new workbooks based on category name in the below list. Respective sheets should be copied from the existing workbook with items as sheet names. List can be updatable.
category(workbookname)Items(sheets)
Vegetables carrot
vegetables brinjal
meat chicken
meat Fish
meat Mutton
grains Wheat
grains Rice
I have pulled a SharePoint list into my workbook. The list object (table) is still linked to the SharePoint list, as I'd like to synchronize it later on. I have filtered it with an autofilter. I'd like to delete all of the visible rows. I have tried a billion things to no avail. I have been searching Google for hours now. None of the examples work.
View 5 Replies View RelatedI am trying to create a macro to copy a set of datas in a row , paste into another workbook (specific sheet),then save it as one of the datas that was copied over.
Workbook1
Ticket#
Description
Name
12345
Test 1
David
32145
Test 2
Steve
Workbook2 - sheet (ABC)
Copy row 2 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)12345
Test 1
David
Saveas Workbook2 - ABC - "12345" - Ticket #
Copy row 3 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)
And so on. I will have a set of data to trasfer to Workbook2, each row different workbook.
I have an expense report, which was originally done in Excel 2003. It still prompts users to open as read only however if they select no, they are not prompted for the password, and it has allowed them to save, so when the next person opens it, they have the previous person's report instead of the clean workbook. I have tried everything to put a password onto it. I know this is really basic stuff, but maybe I am missing a step? I want the end user to be able to make all the changes they want in read only mode and then do a save as, but if the select No when prompted "Open as Read-only?" they should have to put a password in.
View 4 Replies View RelatedI have figured out how to save the workbook using a variable to saveas but I would like to create a new folder to place the new workbook into. I have tried a few things a am not having any luck. I recorded a macro and the code it produced is as follows.
View 6 Replies View RelatedI am trying to sum a filtered list and when a filter changes I want the sum to change and it isn't right now. I have attached a TEST workbook in which all the data is values but in my situation all of the data is actually read from a workbook from each agent.... not sure if that matters.
If I filter by District (East or West), how would I get the total to change? I am trying to avoid any vba or macro within this workbook.
I'd like to have a dynamic report that ranks my lists based on an autofiltered list. In other words, I'd like to toggle the criteria that qualifies the lists content, and have excel generate "ranks" based on the values returned. Currently the rankings are based on the overall list, includeing the records that are filtered out.
View 4 Replies View RelatedI am trying to write a macro that will let me loop through an auto-filtered list (column C in example file) . I want to filter for a criteria (in this case a network), copy the filtered data, paste it onto a new workbook and save it. Although I have been able to record a macro (see below) that can do this, I have to copy and paste this macro over and over again for the other networks. I would like to know if there is a macro that can loop through each criteria in an auto-filter list, copy and save the data into new workbooks for me. I've attached a sample workbook that should be helpful in understanding what I'm trying to do.
View 11 Replies View RelatedI have a list 10 of names in Column A. ( On sheet 1 )
I then filter column A to show only three specific names, or four names etc. . .
On Sheet 2, in cell A1, I would like to list the three filtered names from column A on sheet1
e.g. if the three names showing in column A ( Sheet 1) are: john, mary, jane . . . then on sheet 2 cell A1, I would like to see: "john, mary, jane"
I need to apply a dynamic filter to my constantly changing list.
Here's an extract of the fields in Sheet "Materials". I need to filter by an of the Type Levels or by the "Index #" fields. The result would be used in another sheet. The return value should be a filtered list from the "Full Material Name" field.
Material IDIndex #Type Level 1Type Level 2Type Level 3Type Level 4Material NameFull Material NameM0000110010Class 0 - Raw MaterialsSection 0 - Metallic MaterialSheet & PlateGalvanized10gSheet & Plate - Galvanized - 10gM0000210010Class 0 - Raw MaterialsSection 0 - Metallic MaterialSheet & PlateGalvanized12gSheet & Plate - Galvanized - 12g
I'm trying to write a macro that goes through every value in a filtered list.
Specifically, I'd like the macro to select the first value in the filter. Perform the operation. Select the second value in the filter. Perform the operation. Select the third value in the filter. Perform the operation. Etc...
I need to perform a lookup on the first row of a filtered list. i.e. If I search for VCP/3301/MP the filter displays all rows containing that part number. The first row after the header row may be say A320. The next time I search for a different code the first row may be at A120. How can I select this first row for my lookup?
View 7 Replies View RelatedI have a macro I'm working on and am requesting your help.
In my filtered data, I have an empty column. For each cell in that column, I'd like to insert text, based on the results of the filter criteria.
I am using VBA only, modifying a huge .txt file into a .xls file. The ranges are dynamic.
I am successful in my results, aside from this issue.
I have a large data set (from columns A - I, with over 10,000 rows) of information located on Sheet1 that I need to be able to go through to find the criteria (which is text and is located in column B) I'm looking for. I know how to write the VBA code to use Excel's AutoFilter option .... what I don't know is how can I can identify and copy the results the AutoFilter pulls up, from Sheet1 into another sheet because the data is on a number of different rows.
For example, I have to search column B three separate times for the following criteria:
1. xyz
2. acb
3. hij
this is what I have for the autofilter:
Range("A1:I1").AutoFilter Field:=3, Criteria1:="=xyz"
Today, I may find the "xyz" information on rows 6-150, 755-787, 1021, and 8524-8999, whereas tomorrow "xyz" may be on rows 51-101, 8547, and 9989-9991.
I would like to paste values from a list into a different list - different tab - that is already filtered. When I try to do so, the values will paste into the hidden cells - being filtered -.
Find attached an easy example of my problem. The list I am talking about is around 1,000 lines.
Pasting Example.xlsx
To explain my example, I filter sheet 1 so only item I need are showing - B, D and F in this case - and I would like to paste the value of Alarm 3 from the Sheet 2 to the corresponding line in sheet 1. But it does not really work - line F is not filled - and when I un-filter values are filled into Item C and D.