Distribute Data From One Main Worksheet To Several Other Worksheets
Jan 6, 2010
I am in need of an Excel Macro to help me create an address list by market. For simplicity sake I’ll set up a mini-example: I have an Excel document with a MASTER tab that lists the Market (Column A), a person’s name (Column B) and their Phone number (Column C). What I need to macro to do is read column A and make a new tab for each market in that column, then populate the name and phone fields accordingly.
A found one macro that was close, but it does not automatically make a new tab (I have to do that manually) and it does not refresh the sheet each time I open it, so when I run the macro again I get duplicate entries.
View 13 Replies
ADVERTISEMENT
Feb 26, 2013
I am building a workbook for small group of people in my office to use. I have 7 tabs, the first one is called Main Sheet and the other tabs are the names of each person using the excel workbook. Every tab looks the same, I have the columns labeled: date - job number - job name - contact # - comments
My desire is that each person will be able to input their data on their tab as they receive new jobs, and the main sheet will be a compilation of everyone's sheet. So to clarify, as new information is added to one tab this entire row of information will automatically be added to the next available spot on the main sheet. We are all on the same server so we can all work off the same file. Is this possible to accomplish?
View 2 Replies
View Related
Aug 7, 2006
I went through your board and found the code below posted My Mr. Tom Urtis.
I tired it and it worked fine except that it needs another workbook.
Can it be changed to work in the same workbook to copy to a sheet named as Main from all other worksheets that I can chose?
Sub ImportDistricts()
'Instructional Message Box
MsgBox "Click OK to access the Open dialog." & vbCrLf & _
"Navigate to the folder path that contains" & vbCrLf & _
"the District workbooks you want to import." & vbCrLf & vbCrLf & _
"When you get inside that folder path," & vbCrLf & _
"use your mouse to select one workbook," & vbCrLf & _
"or use the Ctrl button with your mouse" & vbCrLf & _
"to select as many District workbooks" & vbCrLf & _
"as you want from that same folder path." & vbCrLf & vbCrLf & _ ....................
View 9 Replies
View Related
Oct 8, 2007
How to Update the Worksheets field value based on updates done in Main Worksheet.
As i have two different worksheets (Which can be even more then 5) and i want to update the Column Field value of "State" in work sheet "B" & "C" based on the updates done in "State" Column Field value in Worksheet A.
I just want to update the "State" Column Field value in Worksheet "A" and it should update the "State" Column Field value in Worksheet "B" & "C". Only the criteria to match is Number. Based on number i want to search the values in Worksheet "B" & "C" and want that these values also get updated.
View 9 Replies
View Related
Apr 4, 2014
spliting of main data By column criterias which start from column E1:L1 something like Pivot Table in new worksheet, but based on formula functions.Each worksheets have to based in one of this column D1:K1 headings. That also have to rapidly change with main data table.
View 9 Replies
View Related
Aug 3, 2014
I have to create a report that captures the work of 2 different resources on each day of the month, the sheet i am working with has 3 tabs - Main (this houses the main report, with identical fields for each resource), ABC - for details pertaining to work done by the resource ABC ... and a tab called XYZ for details of work performed by XYZ. A resource can work on multiple projects and 3 different modules in one day.
So for each date, i need to bring in the details for columns .. Project Name upto the column # of FB's, for each resource that is for ABC and XYZ.
I have attached a file with sample data, it has the main tab with what it looks like before the data is pulled from the ABC and XYZ tabs ... and what it should like after the required data has been pulled from the ABC and XYZ tabs.
What i am looking for is the formula that i got to enter in the main tab in order to pull the required data from the ABC and XYZ tabs for each date mentioned in each of the columns for each resource (that is ABC and XYZ) in the main tab.
View 3 Replies
View Related
Apr 11, 2012
I have a main spreadsheet that lists all the members and profile URLs for members in a forum. In Sheet 1, Column A is the username and Column B is their profile URL.
In sheet 2 I have a list of the members who are in listed in a particular category in the forum. However, I don't have the profile URL data. What I want to do is create a macro that look in Sheet 1 for the username and if profile URL is thier, copies that into sheet 2 next to the appropriate username.
View 1 Replies
View Related
Oct 21, 2009
I'm looking for a solution for my worksheet. I've got a main tab in which contains deposit data, I need to take the raw data format it and break it down into 7 different tabs. Each week a report is exported and then one for the actual month containing all the data. I’m currently manually recording some formatting macros because I haven’t learned to write my own yet. The number of columns in this report is always constant but the rows vary depending on the number of deposits. I have 7 tabs where the data from the main sheet will be broken down in. In my spread sheet I have the following headings. (A1)Date, (A2)Batch, (A3)Source (A4)Control (A5)Total Batch (A6)Total Variance
The information I would use to copy the rows to other sheets is going to be based on (A2).
Anything that starts with U65 would go into the U-65 tab.
1,7 or 8 would go to the lockbox tab.
2 or 5 = IN-HOUSE
3 = WIRES
4 = DATA OCEAN
Eh, WH, or WE = ACH
Finally the variance tab will contain any rows which have a number other than 0 Positive or Negative. My biggest problem is that I never know how many rows the data will have so when I recorded my macro I Started dragging my formats to about row 200. It could one day surpass this number so If I had a choice id set it to row 1,000.
View 5 Replies
View Related
Oct 17, 2012
I have an order form created in excel with a list of about 1600 products. I have a column set up for the customer to place the ordered amount of each product. What I need now is a way to transfer only the rows that have a value in the "ordered" column to a new sheet. I have seen it before , but don't know how it was accomplished.
View 1 Replies
View Related
Sep 26, 2013
I want to be able to create a log of incoming orders and requests with a column containing initials of the person who will be responsible for handling the item entered. From this sheet, I want to populate other worksheets in the workbook with the data base on the initials placed in the first column. Each initial set would have its own dedicated sheet in the workbook.
Is it possible to create and IF "ST" in column A of main log THEN copy all data to designated fields on the ST worksheet?
View 9 Replies
View Related
Mar 26, 2007
Does anyone out there have a macro that will delete all worksheets except for one specific one? In this case I want all worksheets deleted except for one called "MAIN".
View 9 Replies
View Related
Dec 13, 2006
Is there a possibility that there is a macro in the workbook even when there is no worksheet? I do not want a personal macro, instead, when I open a workbook(with no worksheet), goto tools->macro->open, I should see the macro. This would be helpful so that I can passover the macro to all my team mates and they can open any worksheet from there and work on the macro.
View 2 Replies
View Related
Feb 17, 2014
I organize monthly audits of work completed by the team. Essentially we all audit each others work; but we cannot audit our own work.
I would like a formula that will evenly distribute the jobs for audit without passing a job back to someone that owns the job originally. e.g. Gareth cannot audit a job Gareth owns, but can audit Zach or Claire's jobs. The Excel sheet attached should make it easy to understand.
So far I have tried: =INDEX(A2:A24,RANDBETWEEN(2,24)) but this duplicates data and I cannot get it to evenly spread the jobs amongst the team.
View 3 Replies
View Related
Feb 15, 2010
I have searched and have not been able to find exactly what I need. I currently do this manually and it is taking too much time.
I start with a file (sheet1) that has data in column A for a location.
Column B has a unique 10 number (each location can have between 1 and 10000). Example:
Location,secnumb
1000001,10052950
1000001,10052960
1000002,10052980
1000002,10052990
1000002,10053000
1000002,10053010
1000002,10053020
1000004,10053530
1000004,10053540
1000004,10053550
I need to get this data into the following format for a mail merge:
Location,secnumb1,secnumb2,secnumb3,secnumb4,secnumb5
1000001,10052950,10052960
1000002,10052980,10052990,10053000,10053010,10053020
1000004,10053530,10053540,10053550
I was thinking I would set up a sheet2 with all the unique location codes, and then do a match between the location code on sheet 2 and sheet1 and use an offset function?
But I am way over my head when I work with vba.
View 9 Replies
View Related
Sep 23, 2009
The worksheet is formatted as follows: It contains data in columns A-L. I want to breakdown the data further into sheets according to the data that is found in column G. As an example, say I have 1,000 rows of data and in column G there are a number of different branch numbers in each row. So there may be 250 rows with branch 450, another 250 rows with branch 360, another 200 rows with branch 777, and finally 200 rows with branch 888. In this case I want to create 4 new sheets (450, 360, 777, and 888) and copy only the data in the main sheet that corresponds to same branch.
Actions would be as follows:
copy 250 rows to tab "450"
copy 250 rows to tab "360"
copy 200 rows to tab "777"
copy 300 rows to tab "888"
Any comments are much appreciate. I have attached a data sample along with desired output, if needed. One note: the data comes in each day as one single sheet of data and the number of branches varies day-to-day, as such, code would need to create new sheets for each branch found.
View 5 Replies
View Related
May 13, 2014
I have 3 different sheets with data that I want to combine into one sheet using a formula. Here is an example:
Sheet A
Date Amount
10/1 $5
10/2 $10
10/7 $5
Sheet B
Date Amount
10/2 $7
10/3 $10
Sheet C
Date Amount
10/5 $5
10/6 $10
I want a fourth sheet that fills with all the data from these three sheets. Ideally it would be in order by date, but I understand that might not be possible. So the last sheet should look like this:
Date Amount
10/1 $5
10/2 $10
10/2 $7
10/3 $10
10/5 $5
10/6 $10
10/7 $5
The reason I want to use a formula of some sort is because if I add more rows to sheet A for example, I want the fourth sheet to automatically add it (whether it's possible to do in date order or not).
View 2 Replies
View Related
Oct 19, 2009
I'm getting reports in an Excel file with more then 30 worksheets. All of them have the same structure. I would like to add them all in one single sheet and to place the source "sheet name" in the last column. All sheets have 12 columns with different number of rows (between 1 and 100). First row in each sheet is the header of the table.
View 4 Replies
View Related
Oct 5, 2009
I would like to combine the data (in table format) on 900 different worksheets in one workbook (file) below each other, on one worksheet.
The data are in colombs B,C,D,E & F on all of the 900 different worksheets. The number of rows differs on each of the 900 different worksheets.
View 14 Replies
View Related
Jan 28, 2013
How to list all data from different worksheets into one worksheet without manually copying and pasting it in a new worksheet?
For Example: I have 20 worksheets. In those worksheets are list of items that I bought from the different stores. I want to make a list of all items that I bought in one worksheet.
View 2 Replies
View Related
Jan 27, 2014
how to consolidate all data from all worksheets into a single worksheet(master sheet)?
Untitled.png
In the attachment, data for worksheet 1 will be added to the masterlist and worksheet 2 will follow.
View 3 Replies
View Related
Jun 17, 2014
i have a worksheet that has information filled in columns A-N and rows 3-7262 (not including title and labels)
i need a macros that will separate this data into multiple worksheets based on the word in Column A; these words could be HDA, CCR/NHT, GRU/ATU (essentially dividing this data up by area name, there will be 14 worksheets)
i would also like to be able to update this master worksheet and have it be reflected in the multiple worksheets that are divided by their areas.
View 5 Replies
View Related
Feb 6, 2009
I need a macro to copy data from "sheet1" "sheet2" "sheet3" / column E and F to the worksheet "final". The number of rows in "sheet1", "sheet2", "sheet3" etc. is variable.
View 5 Replies
View Related
Aug 13, 2009
I have four worksheets that all contain the same header row in row 1, but different data in the data rows. I would like to combine all the data from each of the 4 worksheets into a new (created by code) worksheet named "WS Combine". The worksheet named "Result I want 01" simulates exactly what I want the "WS Combine" worksheet to look like. Can this be done?
The header row, however, only needs to be brought over once (with all formatting intact; ie header pane frozen, yellow, centered & bold).
The Worksheet named "Result I want 02" simulates the second thing I would like to do. This worksheet basically looks at "Result I want 01" and copies ONLY the rows that are RED and BOLD and pastes these rows (along with the header row). This worksheet could be named "Red Totals"
A couple of nuances...
1. The rows that are RED and BOLD in the four original worksheets are not always in the same position. That's because they don't currently populate that way so I wanted to make this as real as possible. Therefore, ideally, code that says "just copy all data from four worksheets" would not be sufficient.
If it's not possible or too involved to have the worksheet named "Result I want 01" reorder the rows this way when copying them over, then having them in any order is fine.
2. I need to keep the font formatting of ALL the rows intact as future code will not work without this formatting retained on the two new worksheets.
3. It is possible that duplicate rows can be created (two worksheets have the same exact data) when combining these four worksheets into one. If this is the case, then either allow that to happen or simply delete the duplicate row, whichever is easier.
View 11 Replies
View Related
Feb 24, 2010
I have rankings from several different sources all with different rankings for different people with a different number of people in each set of rankings.
I would like to match the names from each ranking set and place the corresponding ranking into one worksheet. I have done this without the code but over the course of the next couple of months the rankings will be changing.
I have them importing from the web so when they update I would also like for my rankings to update. Attached is the rankings each in their own worksheet.
The final sheet is what the end product looks like.
View 4 Replies
View Related
Jun 10, 2013
I'm trying to consolidate data from different worksheets that has the worksheet name consisting of "Pg*" into a summary sheet. The problem is it does not loop through every sheet and only extracts data from the active sheet.
Code:
For Each ws In ThisWorkbook.Worksheets
If ws.Name Like "Pg*" Then
Set CopyRng = ws.Range("A2:G68")
[Code]....
View 3 Replies
View Related
Mar 25, 2007
I want to transfer the data of one worksheet (to be added everyday) to multiple sheets.
View 4 Replies
View Related
Apr 13, 2009
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
View 2 Replies
View Related
Jun 22, 2009
I have a workbook with multiple worksheets. Each worksheet is a set o data from a certain year. I want to create a macro that automatically copies the data from these worksheets into a master worksheet that can easily be used to make a pivot table.
View 3 Replies
View Related
Feb 23, 2014
I data on a master document and have data sent in from various independent offices which I would like to reconcile. Each region along with the master is posted onto a separate worksheet in my spreadsheet but I would like to copy specific information in worksheet order and paste row by row onto single worksheet in order to run a comparison. The data needed is in the same order but the number of rows reported on each work sheet will differ day by day. If worksheet 1 displays 50 rows in the consolidated sheet I would like worksheet 2 start in row 51, if however worksheet 1 finished in 24, I would like worksheet 2 to start in 25. Now I also want each worksheet to start reporting once the previous worksheet is complete and when there is no data in a specific worksheet, I would like the process to be able to continue.. so sheet 1 reports, then sheet 2 but sheet 3 has no data so it jumps to sheet 4 to begin.
For example consider various cities, New York, London, Frankfurt & Tokyo, each has sales of various products from a catalogue range but the products sold differ each week based on regional trends. The master document which is independent also reports sales but this is manual so I would like to pick up any inaccuracies through reconciliation.
Outside of VBA and Macros, is it possible to get excel to report data sheet by sheet onto one in a continuous order?
View 3 Replies
View Related
Jul 29, 2008
I have tweaked this code in order to accomplish my requirement. I have in all 35 worksheets in a workbook. Out of 35 sheets, 31 worksheets are infact the 31 days of the month starting from 1st July to 31st July. What I want to do is copy and append all the rows in column A (starting from row 2) of all these 31 worksheets into one master worksheet. Basically, appending the rows in col A from all the worksheets together in master worksheet.
Sub append_master_sheet()
Dim wAppend As Worksheet, wSheet As Worksheet
Dim LastRow As Long
Set wAppend = Worksheets("Master")
For Each wSheet In Worksheets
If wSheet.Name wAppend.Name Then
LastRow = wAppend.Cells.Find(What:="*", After:=wAppend.Range("A2"), _
SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
wSheet.UsedRange.Copy Destination:=wAppend.Cells(LastRow, 1)
End If
Next wSheet
End Sub
This code when run gives me a Debug error "Object variable or with block variable not set". I did a research for this error on Google and most of the answers are in reference to using ADO Recordsets. I am not even distinctly using a Recordset in this example.
View 9 Replies
View Related
