Attached is a spreadsheet that has Months in column B and Number of Reviews in column C. What I'm trying to do is create code or maybe just a formula that will scan the Reviews column (col C), find the first non-zero cell, and then copy/paste that value into F4. It would then find the corresponding month that is tied to that value and place it in E4. It would then repeat this process for the rest of the months and copy/paste all the rest of the non-zero cells and their corresponding months into columns E and F. The attached shows in italics what the final product should look like.
It is important to note that the numbers in column C are not static... in some cases the first non-zero cell may be the first cell or it could be the tenth cell. In other words, it's data is dynamic.
I have a range of cells with data from one day. This range is "C36:K63"
Each day, the prior day's range needs to be copied and pasted into a new range that begins two rows below where the prior day's range ends.
Thus, day two should copy "C36:K63" into a new range: "C65:K92"
As you can tell, the rows will change each day, but the columns will always remain the same.
How can I create a macro that allows a user to copy data from the most recent range and paste it into a new range?
i.e. if there is no data in C65:K92, the macro should copy the data from C36:K63 and paste it into C65:K92. Then, the next day, the macro would copy the data from C65:K92 and paste into C94:K121.
Im currently making a macro that vlookups similar information from one sheet into the other but i was wondering if there was a way to create a vb code for the macro that would allow it note cells that have come up as '#N/A' and paste that cell and an accompanying cell into a separate section of the sheet?
I am looking for a way to perform a find, and then copy multiple cells. The code below is what I have this far:
'The code under this section opens the first file and copies the Surrogate Compound components
Dim basebook As Workbook Dim mybook As Workbook Dim mybook2 As Workbook Dim sourceRange As Range Dim destrange As Range Dim SourceRcount As Long Dim N As Long Dim rnum As Long Dim rnum2 As Long Dim rnum3 As Long Dim MyPath As String Dim SaveDriveDir As String Dim FileName1 As Variant Dim FileName2 As Variant Dim FileName3 As Variant
The code above will actual perform the find, and copy what is in the criteria of the search. However, I am trying to find a way to perform the search, copy the data that is in the search creteria plus data that is in another cell. The data in the other cell will always be different, so I cannot use that in a find criteria. The other data will always be found in the "E" column. I was thinking that possible there might be a way to perform the find, copy that entire row, and then just delete the columns that are not needed. However, I have been unsuccessful in my attempts.
I have a list of about 2 million phrases. The list was created by combining two lists in all possible combinations:
a list of about 800 street names a list of about 1000 property names
example
church street flat church street apartment house church street house king's road etc
what I would like excel to do is the following:
look at each cell and determine which of the 800 street names it contains. write that streetname into adjacent cell.
this would then leave me with the original column, where each of the 2 million cells has been assigned one of 800 streetnames.
for example:
church street flat | church street church street apartment | church street house church street | church street house king's road | king's road
that's all. I think that can't be too difficult, and probably it has already been discussed here in the forum. unfortunately I did not know for which keywords to search, that is why I couldn't find the posts.
I hope somebody can help me as I need to get this sorted for work as soon as possible. All semi-automatic ways I could think of to accomplish this would take me days that I don't have.
I need to find a specific text in column D of sheet2 of my worksheet and copy that row to sheet1 to the last blank cell in column B. The macro should continue to search for the next text and copy rows only if there is active cells in the range column A : C of sheet2. I need a VBA code to do this.
Finding any specified Text like "Cube" down a specified Column in this case "D" when Text has been found Copy the 24 cells directly below and Then Paste to G1.
I've just started with VBA and are trying to figure out following:
I'm using a validation list where the user choose one of twelve alternatives. The option she or he made is found in one or more rows in column B. If there is a match between the alternative in the validation list and in column B I want to copy some of the cells in the same row as the match in column B (to be exact, I want to copy the cells in column E, J, N and P) to another sheet.
I've succeeded doing this with one row but I don't know how to do without using that same code over and over again until Excel has made it trough all the rows. And there is over 200 of them.
My Excel workbook is composed of 2 sheets. The first one is a Dashboard (Sheet1) and the second one (Sheet13) is where the data is.
I would like to press a button on the first one, enter the text to be found into an Inputbox and then copy-paste cells from the second sheet (containing the data) into the first one.
The data is structured in rows, from A to V columns.
I would like, according the row where is located the found cell, copy given given cells from Sheet13 to Sheet1.
Right now, I have a macro performing the search like desired and selecting the found cell :
Code: Private Sub CommandButton1_Click() Dim FindString As String Dim Rng As Range FindString = InputBox("Entrer le contrat de support - rechercher (DSI....) ") If Trim(FindString) "" Then With Sheet13.Range("V:V") Set Rng = .Find(What:="*" & FindString & "*", _
[Code] .......
I would like to copy cells located in the columns A, B, D, E, F, K, S, (T:U) from the row where the searched string has been found in Sheet13. It has to be copied on Sheet1, on two rows : (N29:Q29) & (N30:Q30).
When a new research is done, the previously copied cells should be cleared out.
2. The second point is about duplicating a button with an associated macro. The macro is running like I want but I have to insert 299 more buttons, with the updated formula according to the row where it is located.
However, one part of the macro has to stay the same because all of these 300 buttons increment a single counter located on Sheet1.
I have a large sheet with serial numbers of machines in one column and more or less important information in other columns. I’m trying to write a macro that is activated by selecting a serial number from a list box. The macro should then find the right row and copy cells from that row and paste them on another sheet to create a summary of that machine.
The code is supposed to find HEQL in column G in BOOKED.XLS ( attached) and then do a series of copy pastes into two other workbooks. For some reason, it is only finding one instance of HEQL and there should be 255.
I have a 'rota' worksheet that includes staff names and their rostered hours on all dates through the month.
On each date of the month I need excel to find that date in column A and then look across the row to find any cells that aren't blank. When the cell has a value I need the name above it in row 1 and the value (number of hours) itself to copy across to a 'daily activities' sheet. The date is autopopulating on this sheet in cell H5.
The name needs to drop into column A and the hours worked into column B. I would like the first cell to be A9 and then down from there with no spaces in between names. The other info on the sheet will then complete itself using the name that has been dropped in using VLookup.
I'm presuming I can use a macro to do this for me but am really struggling where to start with it, and how to ignore blank cells as they will change cells on a monthly basis.
Purpose: Build a roster from: Sheets(Settings).Range("A21").Value (this value is variable)
Problem: Find that A21 value in Range T2:T100 (each value in the range is unique) Copy that value to Sheets("Roster") E8 and the next 9 values to E14 E20 E26 E32 G2 G14 G20 G26 G32
Reason for posting: I've been trying to do this with vba but sheet formula will probably work, I can always Copy/Paste Special/Values to clear the formula. Keyword searching has resulted in no progress.
I have a spreadsheet that I would like to loop through column "C" and if criteria is met copy and paste A:C on sheet1 to sheet2 over multiple columns alternately. What I mean by alternately is that I would past the first row in column A6 then the second in E6 then the third in A7 and so on until all items are copied. I purposely left a blank column between both columns of information. I've tried sorting/and advance filtering and couldn't get it to work.
Example: loop through column "C" If I have the Letter "A" copy data to column "A" and "E" alternately back an forth until I no longer meet the criteria. I start putting data on the 6th row due to header information in rows 1-5. ... If column "C" is the letter "B" copy to column I,M,Q,U
Lastly I could always have less rows of information than I do columns. SO the last column could be empty. I always sort my data by column "C" so data will be sequential.
I got 2 columns A and B, I need to find if the cells in colume B are in cloumn A and do some copy pasting. But sometimes when it cant be find in column A, then VBA shows an error message. What I want is if it cant be find in column A, then skip it and go to the next cell of B and find it in A again. I think it can be done with On error resume next, On error goto 0, but i cant make it work.
I am working with arrays that extend far beyond their actual content, and so i am looking for a way, through macros, to find the first blank cell in a column and then copy all preceding cells in that column.
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date Column D = loan# A Column E = loan# B Column F = status Column H = followup needed (Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows: Column G&H = Merged cells where due date will need to go Column I&J = Merged cells where loan# A will need to go Column K&L = Merged cells where loan# B will need to go Column M thru S = Merged cells where followup needed will need to go
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
Is there a way in which you can use two cells (a2 & b2 for example) with a button to trigger a macro which will search for a2 and replace with b2 over a certain range of cells? unless there is a function to do it of course, which i would prefer!!
I have a task that pulls out information from the website. I need to write a vba code to find the last row. Since the no of rows are always not the same. I would need the excel masters help to solve it. Just a small piece of guidance would also help me.
In my work sheet I need to find the word " Function Name: Cleaning" if this is there then I should find the occurence of the word " name". If I find that then the code should copy the values in the column after name till it sees a space ( means no value). Should copy till that and paste that in another work sheet.
I am having issues with a VBA script. The Spreadsheet is linked to a SQL DB and updated with data from scripts that are executing throughout the day. This is then fed to a dashboard. We have a Baseline that shows in the Date column as 0/0 and 1/1. I need a way to ensure that the 1/1 is always in the last row of the chart so the baseline shows across the entire range of dates. The current method is to declare a variable and add 1 to it whenever we iterate through the sort for the other dates. However everyday the 1/1 baseline column ends up further to the beginning until it is next to the 0/0 in position 2.
So I am trying to find a way to have the macros find the last row of the Date field and then set the position to be equal to the last row.
I know how to make a dynamic chart that shows only the last X number of rows. However, I'm looking to do something slightly different.
I have columns A and B both with 3000 rows of values. I would like to make a bar graph. Some of the rows are NA(), some have the data that I would like to graph. The data I would like to graph is always in a group, say from rows 100 - 200, but this could change in location from rows 95 - 195 instead, and could also change in number of rows to be rows 95 - 150 (ie. 55 rows rather than 100 rows). I would like my bar graph to be able to search Columns A and B and pick out the section with data (ie. not NA()) and graph it. I had introduced the NA() hoping that I could just put the entire range in the chart and it would pick out the numbers, but I gather this only works when using a scatter graph which just won't work for my needs.
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
I have an worksheet that I import a csv into, each day a new csv is added to the bottom of the previous csv data. I have some code that extracts the date and month # from the cell and places them in helper columns. The code find the last used cell in the helper column and the imported data column to find the first and last row of the new day.
This part works fine. However, I assigned a variable name to the first and last variables and would like to uses these row number to define a range in order to use the range for a vlookup or find operation. This is where I get stuck. I want to use column x and row (variable from first bit of code) to column y and row (variable from first bit of code). Then use a vlookup/find whatever works to find the text I need and get the data. Tips on looping the code would be welcome as well.
I have searched for answers to the problem, on the board and web, but have not found a solution that works for me. (at least that I could get to work!!)
Below is the code as I have it
Public Sub Enter_Date()
Dim DateA As Date Dim DateB As Date Dim Cnt As Integer Dim End_of, Beg_of As Integer Dim Count As Integer Dim NumtoFill As Integer
I'm working on the second part of the spreadsheet which will be a separate macro, and I have to admit I'm pretty much way over my head with this one. I'm attaching the spreadsheet for clarity.
What I'm doing is using the first macro to create a set of charts on Sheet2. From those charts I make a note of the start and end points of each 'hump' that shows up from the data. There are two 'humps' that come from each column. I record the start and end points (these refer to the column numbered sequentially, 0 to 749) in Sheet3 in the appropriately marked cells, and from these numbers I calculate how many points of data will need to be copied over (this is the information NEXT to the cells I just mentioned). I also have a formula in Sheet3 that I set up and paste across the rows, parts of which change depending on how many rows of data from a column get pasted over from Sheet1.
I have 2 worksheets, "Data Dump" and "Target List"
I'm trying to cycle through the "Target List" in column "A", find the same value in column "B" in the "Data Dump" sheet. When I find it, I want to copy several other cells from the found row into cells on the "Target List" (though probably to a different column). Here is the code I'm trying to use. How to correct it to get the result I'm looking for.
I'm trying to make two identical worksheets in a workbook. I would like the second sheet reflect all the changes made in the first one. I thought I would simply use = but it doesn't work correctly if I add or delete rows. If I add a row between row 1 and 2 in the first sheet the formula in row 2 in the second worksheet changes from =sheet1!A2 to =sheet1!A3. The result is the same if I use absolute references which suprised me. I want the formula in row 2 to stay =sheet1!A2 whatever happens on the first sheet.
I don't care about formatting, just data are important.
The reason I want the same data on two worksheets is that the second sheet will contain some more data that should not be visible to everyone. I want to protect the second worksheet and require a password to unhide it.
