Im currently making a macro that vlookups similar information from one sheet into the other but i was wondering if there was a way to create a vb code for the macro that would allow it note cells that have come up as '#N/A' and paste that cell and an accompanying cell into a separate section of the sheet?
View 2 RepliesAttached is a spreadsheet that has Months in column B and Number of Reviews in column C. What I'm trying to do is create code or maybe just a formula that will scan the Reviews column (col C), find the first non-zero cell, and then copy/paste that value into F4. It would then find the corresponding month that is tied to that value and place it in E4. It would then repeat this process for the rest of the months and copy/paste all the rest of the non-zero cells and their corresponding months into columns E and F. The attached shows in italics what the final product should look like.
It is important to note that the numbers in column C are not static... in some cases the first non-zero cell may be the first cell or it could be the tenth cell. In other words, it's data is dynamic.
I am looking for a way to perform a find, and then copy multiple cells. The code below is what I have this far:
'The code under this section opens the first file and copies the Surrogate Compound components
Dim basebook As Workbook
Dim mybook As Workbook
Dim mybook2 As Workbook
Dim sourceRange As Range
Dim destrange As Range
Dim SourceRcount As Long
Dim N As Long
Dim rnum As Long
Dim rnum2 As Long
Dim rnum3 As Long
Dim MyPath As String
Dim SaveDriveDir As String
Dim FileName1 As Variant
Dim FileName2 As Variant
Dim FileName3 As Variant
The code above will actual perform the find, and copy what is in the criteria of the search. However, I am trying to find a way to perform the search, copy the data that is in the search creteria plus data that is in another cell. The data in the other cell will always be different, so I cannot use that in a find criteria. The other data will always be found in the "E" column. I was thinking that possible there might be a way to perform the find, copy that entire row, and then just delete the columns that are not needed. However, I have been unsuccessful in my attempts.
I have a list of about 2 million phrases. The list was created by combining two lists in all possible combinations:
a list of about 800 street names
a list of about 1000 property names
example
church street flat
church street apartment
house church street
house king's road
etc
what I would like excel to do is the following:
look at each cell and determine which of the 800 street names it contains. write that streetname into adjacent cell.
this would then leave me with the original column, where each of the 2 million cells has been assigned one of 800 streetnames.
for example:
church street flat | church street
church street apartment | church street
house church street | church street
house king's road | king's road
that's all. I think that can't be too difficult, and probably it has already been discussed here in the forum. unfortunately I did not know for which keywords to search, that is why I couldn't find the posts.
I hope somebody can help me as I need to get this sorted for work as soon as possible. All semi-automatic ways I could think of to accomplish this would take me days that I don't have.
I need to find a specific text in column D of sheet2 of my worksheet and copy that row to sheet1 to the last blank cell in column B. The macro should continue to search for the next text and copy rows only if there is active cells in the range column A : C of sheet2. I need a VBA code to do this.
View 5 Replies View RelatedFinding any specified Text like "Cube" down a specified Column in this case "D" when Text has been found
Copy the 24 cells directly below and Then Paste to G1.
I've just started with VBA and are trying to figure out following:
I'm using a validation list where the user choose one of twelve alternatives. The option she or he made is found in one or more rows in column B. If there is a match between the alternative in the validation list and in column B I want to copy some of the cells in the same row as the match in column B (to be exact, I want to copy the cells in column E, J, N and P) to another sheet.
I've succeeded doing this with one row but I don't know how to do without using that same code over and over again until Excel has made it trough all the rows. And there is over 200 of them.
There are two problems to solve :
My Excel workbook is composed of 2 sheets. The first one is a Dashboard (Sheet1) and the second one (Sheet13) is where the data is.
I would like to press a button on the first one, enter the text to be found into an Inputbox and then copy-paste cells from the second sheet (containing the data) into the first one.
The data is structured in rows, from A to V columns.
I would like, according the row where is located the found cell, copy given given cells from Sheet13 to Sheet1.
Right now, I have a macro performing the search like desired and selecting the found cell :
Code:
Private Sub CommandButton1_Click() Dim FindString As String
Dim Rng As Range
FindString = InputBox("Entrer le contrat de support - rechercher (DSI....) ")
If Trim(FindString) "" Then
With Sheet13.Range("V:V")
Set Rng = .Find(What:="*" & FindString & "*", _
[Code] .......
I would like to copy cells located in the columns A, B, D, E, F, K, S, (T:U) from the row where the searched string has been found in Sheet13. It has to be copied on Sheet1, on two rows : (N29:Q29) & (N30:Q30).
When a new research is done, the previously copied cells should be cleared out.
2. The second point is about duplicating a button with an associated macro. The macro is running like I want but I have to insert 299 more buttons, with the updated formula according to the row where it is located.
However, one part of the macro has to stay the same because all of these 300 buttons increment a single counter located on Sheet1.
Code:
Sub Button2600_Click() If MsgBox("Etes-vous sûr de vouloir ajouter 1 année de support pour" & vbNewLine & Range("E7") & " " & "(" & Range("F7") & ")" & " ?", vbYesNo + vbQuestion, "Modification du Contrat de Support") = vbYes Then
Sheet13.[A7] = DateAdd("yyyy", 1, [A7])
MsgBox "Contrat étendu d'une année."
Dim x As Integer
x = Sheet1.[R11].Value
Sheet1.[R11].Value = x + 1
End If
End Sub
You can get the excel workbook at the following link : [URL] ....
I have a large sheet with serial numbers of machines in one column and more or less important information in other columns.
I’m trying to write a macro that is activated by selecting a serial number from a list box. The macro should then find the right row and copy cells from that row and paste them on another sheet to create a summary of that machine.
The code is supposed to find HEQL in column G in BOOKED.XLS ( attached) and then do a series of copy pastes into two other workbooks. For some reason, it is only finding one instance of HEQL and there should be 255.
Sub COF1()
Dim lastrow As Long
Dim x As Long
Windows("COF_OUPUT.xls").Activate
Worksheets("Sheet1"). Range("B:B").NumberFormat = "0.0000000000000000"
Windows("BOOKED.xls").Activate
Range("A65536") = "100"
Range("A65536").Copy
Range("F2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlDivide, SkipBlanks _
:=False, Transpose:=False
Range("A65536").ClearContents
Range("A1").Select .....................
I have a 'rota' worksheet that includes staff names and their rostered hours on all dates through the month.
On each date of the month I need excel to find that date in column A and then look across the row to find any cells that aren't blank. When the cell has a value I need the name above it in row 1 and the value (number of hours) itself to copy across to a 'daily activities' sheet. The date is autopopulating on this sheet in cell H5.
The name needs to drop into column A and the hours worked into column B. I would like the first cell to be A9 and then down from there with no spaces in between names. The other info on the sheet will then complete itself using the name that has been dropped in using VLookup.
I'm presuming I can use a macro to do this for me but am really struggling where to start with it, and how to ignore blank cells as they will change cells on a monthly basis.
Purpose:
Build a roster from:
Sheets(Settings).Range("A21").Value (this value is variable)
Problem:
Find that A21 value in Range T2:T100 (each value in the range is unique)
Copy that value to Sheets("Roster") E8
and the next 9 values to
E14
E20
E26
E32
G2
G14
G20
G26
G32
Reason for posting: I've been trying to do this with vba but sheet formula will probably work, I can always Copy/Paste Special/Values to clear the formula. Keyword searching has resulted in no progress.
I have a spreadsheet that I would like to loop through column "C" and if criteria is met copy and paste A:C on sheet1 to sheet2 over multiple columns alternately. What I mean by alternately is that I would past the first row in column A6 then the second in E6 then the third in A7 and so on until all items are copied. I purposely left a blank column between both columns of information. I've tried sorting/and advance filtering and couldn't get it to work.
Example:
loop through column "C" If I have the Letter "A" copy data to column "A" and "E" alternately back an forth until I no longer meet the criteria. I start putting data on the 6th row due to header information in rows 1-5.
... If column "C" is the letter "B" copy to column I,M,Q,U
Lastly I could always have less rows of information than I do columns. SO the last column could be empty. I always sort my data by column "C" so data will be sequential.
I got 2 columns A and B, I need to find if the cells in colume B are in cloumn A and do some copy pasting. But sometimes when it cant be find in column A, then VBA shows an error message. What I want is if it cant be find in column A, then skip it and go to the next cell of B and find it in A again. I think it can be done with On error resume next, On error goto 0, but i cant make it work.
View 2 Replies View RelatedI am working with arrays that extend far beyond their actual content, and so i am looking for a way, through macros, to find the first blank cell in a column and then copy all preceding cells in that column.
View 8 Replies View RelatedI need to find the last instance of "IO" in column E and copy cells in columns B to E for the row below to another tab called "OP" cell O9.
I need the VBA code for Excel 2003.
how to work macros or VBA
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date
Column D = loan# A
Column E = loan# B
Column F = status
Column H = followup needed
(Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows:
Column G&H = Merged cells where due date will need to go
Column I&J = Merged cells where loan# A will need to go
Column K&L = Merged cells where loan# B will need to go
Column M thru S = Merged cells where followup needed will need to go
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Here’s what I want to do in VBA
1. Put a value in cell H1 (text and numbers)
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
I have 2 worksheets, "Data Dump" and "Target List"
I'm trying to cycle through the "Target List" in column "A", find the same value in column "B" in the "Data Dump" sheet. When I find it, I want to copy several other cells from the found row into cells on the "Target List" (though probably to a different column). Here is the code I'm trying to use. How to correct it to get the result I'm looking for.
[Code] ....
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
The following macro does what it is designed to do and needs to be run from a control sheet called "Guide". When I run it from this Guide sheet it stops at around row 53 (out of 1400 rows) on each of the specified sheets in the macro. I have struggled with this problem and have now discovered that the macro will run correctly when run from one of the worksheets specified in the array, e.g. sheet "200 and 100".
Sub Calculateclosingtrades1()
Dim r As Long, c As Integer, LastRow As Long, rcheck As Long
LastRow = Range("J65536").End(xlUp).Row
Dim shtTemp As Worksheet
Dim vntName As Variant
For Each vntName In Array("200 and 100", "100 and 50", "50 and 25", "40 and 20", "20 and 10", "15 and 10", "18 and 9", "200 only", "100 only", "50 only", "40 only", "25 only", "20 only", "15 only").............
I'm working on a project for my company. We make plastic tanks and for quality control we want to start recording the thickness of the tanks in different areas/zones of each tank.
Attached to this message is an Excel sheet that I've been working on. From "Sheet 1", it records inputted thicknesses into WorkSheet "1098". On the top of "1098", it shows all of the recordings, and just below that are the "10 Most Recent Entries".
Right below the "10 Most Recent Entries", there are formulas to calculate the Min and Max Values. Whenever a new entry is recorded, the selected cells for the Min and Max formulas change. Is there a way to force the cells to always stay the same?
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
I am using the find function to establish the row number in a spreadsheet for an edit process.
Code:
wks.Range("B:B").find("something").Row
the cells in Range("B:B") are linked to another worksheet. If I copy paste values on the cells in Range("B:B") the code above works a treat.
I need to mine a huge spreadsheet of about 30,000 cells and make columns from specific words. As in.
I need to search for all words "table" even if the word is "My_table" or "aTable" and suck them into one column. I have to do this one several words.
Let me know if you have the solution. I am trying to write something but I am unsure of the syntax at this level.
1. I have a list of data (Collated Data)
2. For every row in collated data I want to export the cells into a corresponding cell in my predetermined workbook (TAF Form), i.e, Cell C1 on Collated data goes into Cell D3 on TAF Form, cell D1 to cell I3 etc etc
3. Once all cells in one row have been copied into the TAF Form I want that TAF Form to save as "TAF Form & Employee Name" (which would come from cell D3).
4. I then want "TAF Form & Employee Name" to close.
5. I then want the Macro to do the same thing for Row 2, copy the cells, save the form, close the form
6. I want to do this for every row that I have (which varies).
Is this possible? If you have any more questions in terms of what I need, don't hesitate to ask.
I have 8000 data in a column.
For example.
red shoes
tennis shoes
running shoes
tennis balls
running shorts
I want to find & copy the sentences say:
1.With word shoes
2.With word running
3.With words tennis
Can some one help? I need a macro that will find the last value and copy the all rows from that value back to row A.
At present, because I have a formula in the cells my macro goes to the last row this has been entered into.