Filter The Range Items Dispayed In A UserForm
Jan 31, 2005
As shown in the sample attachted Excel spreadsheet, I have a UserForm set up to display 2 colums of the range "Elist" using a ListBox. The Userform is called by a Button. I want my UserForm to display subsets of the "Elist" range thus restricting the users choices based on the results of a Filter operation performed on the Elist range. I wrote some filtering code that does select my intended subset of "Elist". I then use the initialize event of UserForm to set the RowSource of the ListBox to "Elist" hoping to display the filtered subset of "Elist". However, the ListBox continues to display the full range "Elist", not the desired filter subset.
View 2 Replies
ADVERTISEMENT
Feb 10, 2008
How can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies
View Related
Jun 24, 2014
In my code to filter on some data i'm trying to filter out the top 5 highest values.
[Code] ......
The code just fails to run properly.
View 4 Replies
View Related
Oct 26, 2013
I've created a PivotTable using VBA that contains hundreds of PivotItems, which would look bad when a PivotChart is made.
I'd like to set the PivotTable to make visible only the first X items (let's say 10). How would I do this in VBA?The macro recorder gives me the name of the PivotItem, but this varies so I'd like to use an index:
VB:
ActiveSheet.PivotTables("PivotTable4").PivotFields("UWI").PivotItems("Item1").Visible = False
ActiveSheet.PivotTables("PivotTable4").PivotFields("UWI").PivotItems("Item2").Visible = False
View 2 Replies
View Related
Feb 6, 2014
I have created a spreadsheet copying and pasting data from other workbooks. When I select filter it all looks right but there is no items except select all which is unchecked, when I check it still nothing. I have added a screen shot of the sheet.
View 2 Replies
View Related
Jun 11, 2008
I'm running reports in one workbook on different types of spend for 12 business units using 1 worksheet containing the raw data, and 6 other sheets with pivot tables showing different levels of detail.
I've used simple VBA to prepare to standardise the raw data and refresh all the pivot tables with no problem
I need to filter the data to show spend for specific business units. I'd like to do this using a listbox showing the units where I can select the unit(s) to report on, which in turn will only make the units selected visible on each table in the workbookwith no other intervention.
There is another thread on here (showthread.php?t=55041) that shows how to use the list box to control 1 pivot table on one sheet but I can't find anything which shows me how extend this to cover multiple tables over multiple sheets.
View 4 Replies
View Related
Dec 30, 2009
I am looking for a way in VB to select and unselect items in the list for filters generated in a pivot table.item list. Ho do I do that?
View 5 Replies
View Related
Sep 26, 2013
I have two pivot tables, both of which source the same sheet of data. Each record in the data has two fields, Region ID of person and Region ID of facility, that reference the same list of Region IDs via vlookup (it's just numbers 1-12). Either one or both can be blank. One pivot outputs counts by person Region ID, and the other, by facility Region ID.
Using a combination of nested IF statements and vlookups, I tried making a third Region ID field that could be used as a slicer to control both tables, but what I end up with is an undercount in one of the tables. The only thing that works so far to output the correct counts is having two separate slicers, the facility Region ID being the slicer for one and the person Region ID being the slicer for the other. If the end user wants to see counts for one Region ID, they have to manually set one slicer equal to the other. But what we want is just for the end user to be able to control both tables just by pushing a single number, Region IDs 1-12.
I can make one of the slicers hidden but then how do I get the hidden slicer to automatically select Region ID values equal to the nonhidden slicer? Alternatively, I could somehow program a combo box or list to control the two different slicers, then the slicers would be hidden and the user would see only the combo box/list. (I guess in either of these alternatives, I could just use a report filter instead of a slicer; either way, I still have to get items in one to automatically select based on the user's selected items in another).
FYI, some of the options I looked up involved PowerPivot, which I do not have access to. VBAs/macros are ok.
View 2 Replies
View Related
Jan 20, 2012
What criteria can I use to filter a list on and item and the latest date?
I need to extract a list of all items but only with the latest date of each ...
View 3 Replies
View Related
Nov 11, 2013
I have a pivot table with the following items;
Report Filter = Project Names & Dates (filtered on 2 fields)
then the pivot table of data shows
Dept, Sum of Hours, Sum of Total ($), Sum of Days
When you click on the drop down to adjust the filter for the Date it gives you the whole list of dates, day by day as it is in the source data.
Is there a way to make it in the filter by month and year, the way it would in an ordinary filter. So if I wanted to have the pivot table show only the values with an October date I can, rather than having to deselect all and then individually check the boxes for the 1st through to the 31st of October.?
View 2 Replies
View Related
Jun 19, 2013
I'm trying to use a List Box to select multiple items on my Pivot Table but I can't seem to get it to work. Its the Report Filter part of the pivot table.
When the list Box is set to fmMultiSelectSingle it work and selects the indivdual items, but I need it set as fmMultiSelectMulti for if i'm also needed to select multiple items. (which doesn't seem to work!)
View 2 Replies
View Related
Apr 1, 2014
Using Excel 2013,
I clicked on a field in my RowLabels
I then clicked on the Filter Arrow for the RowField
The SelectedField prompted with the correct field of 4 possible fields
However the item I am looking for is not in the list but I can plainly see it on the screen.
View 3 Replies
View Related
Jun 28, 2014
I'm working with many rows of data (500,000+) and many columns. To simplify my question, I'm going to provide a simple example using made up numbers and only the columns I'm concerned with.
BillT Doc.ItemQty
F11231012.00
F2123205.00
S1123105.00
RE321202.00
F2321108.00
F2321201.00
RE321203.00
RE999808.00
F27771001.00
RE7771001.00
I am trying to remove the docs that have two Bill types that cancel each other out, where the qtys match and highlight the rows where the qtys don't match. The macro needs to have the positive and negative bill types programatically entered, where for example F1 and F2 are positive and S1 and RE are negative. Keep in mind the data may not necessarily be in order as it is above.
So for example with data above, the rows for doc 777 would be removed completely because the item numbers are the same, the qty is the same, and the bill types oppose each other. Doc 123 and Item 10 lines should be highlighted since their bill types are opposed bu their qtys don't match.
I hope this makes sense. I tired to achieve this using multiple loops and arrays, but ran out of memory when working with the entire set of data. I'm assuming their must be a better way to do this, I'm hoping some of the intelligent individuals here will be able to point in the right direction.
View 8 Replies
View Related
Dec 22, 2011
In the coming months the company i work for will be transferring from Excel 2003 to Excel 2010 (i know, a little late......) and now i am testing some things at home.
We deliver lots of Excel reports to our clients where we are using Pivot tables. In excel 2003 we where able to hide items from the dropdowns using properties - hide items but when i now open an excel 2003 file in excel 2010 and want to filter the pivot table to (let's say) another month i see all my hidden items.
Is there an option in excel 2010 to hide items like i could do in 2003? (either regular option or VBA)
View 4 Replies
View Related
May 1, 2014
I found a great bit of Advanced Filter code that works great, and fixed a problem of clearing a cell breaking the filter.
But if I want to increase the criteria from 1 row to 2, so you can start to include And , Or operations, it breaks the filter. Even an attempt at a manual one fails, until you put the criteria range back down to one row, then it's fine again.
I've tried changing the Target Row to >2 but that didn't work. how to make the criteria range bigger, and no problems of breakage if you clear the cells? It makes for a very useful automated Advanced Filter.
Here's the code :
[Code] .....
Database = the named area of raw data.
DATA is the name of the raw data worksheet
The criteria range should be AZ1:BC3, but of course royally breaks it...
View 4 Replies
View Related
Mar 10, 2014
seeattached data set.
Contract Item
Gross Profit
GP %
[Code]....
It is Gross Profit in Dollars and % for a particular project. Each row is a contract Item. The Overall Gross Profit for the month in dollars is 34,114.86 In preparing a short commentary to discuss this 34,114.86 I need to discuss atleast some contract items. If there were no negative results I have often in the past simply written. The top 5contributors to this Gross Profit were contract items 1 -6, out of 42, delivering 80% of the result. I might also go into what actually those contract items were and why they presented such a decent Gross Margin, ie. Costs came in well under budget(estimate). But with negative results, the bottom 4 contract items represent a large dollar loss of-34k which is 100% basically of the Gross Profit itself. If these had even just broken even we would have a GP double the current amount. So they obviously deserve as much comment.
Q1
In excel orsimilarly in say Crystal Reports what is a good way of further sorting these 42records either in a table or chart, whereby say the top 80% contract items that had a major impact on the gross profit are shown and the rest hidden. Ie. All thelittle sub 1000 or sub -1000 amounts.
Q2
How wouldother people here write a commentary on this data set? Can you script something to illustrate?
View 3 Replies
View Related
Jul 24, 2012
I've create a userform1 that sends information via email. I have seen userforms that do the same, but that after sending, the sent email doesnt show in the sent items from outlook.
The userform has 2 tectboxes and when the person sends the email the text from the second box comes right after the first one, no space or anything. How do I separate the text by space or paragraph.
View 2 Replies
View Related
Mar 3, 2008
i'm trying to build a GUI-only application using Excel Userforms, with File and Help menus on the form. i'm coming from Java where i know getting a menu on a GUI is possible, but i haven't seen any resources for it in VBA Excel Userforms. is it possible to place menu items in a userform?
View 4 Replies
View Related
Feb 27, 2014
I have a (MultiSelect) ListBox1 that is populated with Customer Names for the user to select from. I want the user to be able to hit the CommandButton1 adjacent to the ListBox1, and the selected Customers copy into/get added to the ListBox2.
I have the following code, adapted from other code, but it is not working:
[Code] ........
View 2 Replies
View Related
Jul 15, 2008
I would like to populate the captions of checkboxes in a userform with the items listed in a drop down menu located in cell A1. Lets just say I don't know exactly how many items in the dropdown there will be, but I do have an estimate number. Maybe between 20 and 25.
View 9 Replies
View Related
Dec 26, 2012
How to get a listbox to populate from a database sheet the code I am using to do this is posted here and it works great. My problem is now I want to get the Listbox1 results to populate my UserForm5 textboxes from the row selected in the ListBox1 of Userform4, but I am getting the error "variable not defined" and the "rw" gets highlighted. as seen in the code below it.
UserForm4 portion of the code that does the search of the sheet that holds the data
Code:
Private Sub CommandButton1_Click()
Dim sFindText As String, sFirstAddr As String
Dim i As Long, lFindCol As Long, lCol As Long, lRow As Long
Dim rMyData As Range, rMySearchField As Range, cFound As Range
Dim vArray() As Variant
[Code] ......
Userform5 issue is this rw in red doesn't seam to be right
Code:
Private Sub UserForm_Initialize()
TextBox1.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 0) '
TextBox2.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 1) '
TextBox3.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 2)
TextBox5.Value = SrcWks.Range(UserForm4.ListBox1.List(rw, 0)).Offset(0, 3)
[Code] .........
View 9 Replies
View Related
Feb 28, 2014
Returning items selected from a ListBox. I have a Multiselect Listbox with 15 items. Additionally, I have a worksheet with 15 columns (each one corresponding to the 15 ListBox items). I'm looking for code that will do the following:
After a user selects values from the ListBox (can be more than 1, thus the Multiselect), I would like for "TRUE" to appear in row 2 of the worksheet for each column. (IE: Column A is for Bikes, if a user selects "Bikes" from the ListBox and hits a CommandButton, I would like for A2 to say "TRUE".
View 5 Replies
View Related
Jan 29, 2013
I would like to insert the count of items selected in a listbox in a Userform into a cell. I have been scowering the internet and all of the solutions seem pretty clunky (or don't work).
An alternate way that I could do this is if I have the values selected be entered into a column and then I can use the =count() formula, but I can't figure out how to do that either...
View 1 Replies
View Related
May 23, 2014
I would like to know whether it is possible to change the background colour of items in a dropdown/combobox on my userform?
I have a series of times at 15 min intervals and i want, if possible, to distingish between 'working hours' and 'non-working hours' by making the background of these numbers 'grey'.
Maybe looping through from 00:00 to 07:00 i.e 28 times (28 x 15min intervals)?
View 2 Replies
View Related
May 22, 2008
I'm trying to create a simple userform to look up zip codes by city using the filter function, but I'm getting a "type mismatch" error. I'm very new to VB and have been searching all morning for the answer but am stumped, so I'd really appreciate any feedback. Here's the code I'm using:
Private Sub UserForm_Initialize()
Dim ListItems As Variant, i As Integer
'set scrollbar height
Me.ScrollHeight = 100
With Me.ComboBox1
This userform will be called up from another data entry form.
ComboBox1=Cities which are in column J5 of sheet "lookup"
ComboBox2=Zip which are in column K5 of sheet "lookup"
I've tried changing the Compare Method from Text to Variant but still get the same error msg....
View 9 Replies
View Related
Apr 22, 2009
I have a UserForm that is designed to allow the user to filter dates on various columns. There are three comboBoxes on this sheet that are populated by linking to cells on a Control worksheet using RowSource in the Properties window. catCombo is the column to filter, dateCombo and endCombo are the two dates to filter between.
I have come up with the following code to activate filters, but there are problems (which I'll tell you about in a sec!):
View 3 Replies
View Related
Jan 11, 2008
I have a spreadsheet containing data relating to addresses, the postcode and house number are in seperate cells. I want to input postcode and house number into a userform (" find record") have that locate the entry in the worksheet, then return the 18, cells in the row to a second userform ("updater") to be updated/edited and the updated data returned to the cells it came from, by necessity some of the cells in the worksheet use data validation lists. I have the two userforms and have included listboxes in "updater" and have linked these to the data validation lists in the worksheet.
View 3 Replies
View Related
Aug 6, 2008
With the attached spreadsheet what I am trying to do is create a userform sheet that I can use to look up a specific date within the spreadseet. First of all I somehow need to populate the drop down box with all the dates that are located in the sheet. From there I would like a macro to go through my workbork and find all the selected dates and bring back the "Task #" and Site Name associated with the dates
For example if I put Mon 09 Jun in the macro will bring back
Site one - Task 1
Site three - Task 2
Site two - Task 1
View 5 Replies
View Related
Mar 22, 2014
I have a Userform where I use a ComboBox to populate raw A from a worksheet.
I use this form to update new data that relates to the selected item in the ComboBox.
In that user form, when I select an item from the ComboBox, I idetifay it's raw and display the data from columns B,C...to I in text boxes on the Userform.
I then set the "Enable" property of the text boxes that has data to "False" so that field cannot be updated again.
What I do today is if all the fields where updated, a message box will say "All fields are full" and I clear the form.
Now I want to improve my selection by removing items from the ComboBox if all the "needing update" columns are field.
By this I want to filter out the items that where already updated before and only show the ones needing update.
Here is what I have, I need to change the UserForm_Initialize section so it will only show the rows needing update.
Code:
Private Sub UserForm_Initialize()
'Populate "Cards" Combobox.
Dim rngCards As Range
Dim ws As Worksheet
Set ws = Worksheets("Rejects")
[Code]..
View 7 Replies
View Related
May 6, 2009
I want to select items in a listbox and transfer those items via command button in a textbox. The listbox is already filled. I have no idea how to realize that.
Attached is the form I created so far. I copied everything together and matched it up for me. It's probably not the best way but it works. I marked the section where I need help in yellow.
View 9 Replies
View Related
