Filter To Show Top 5 Items

Jun 24, 2014

In my code to filter on some data i'm trying to filter out the top 5 highest values.

[Code] ......

The code just fails to run properly.

View 4 Replies


ADVERTISEMENT

Smart Filter To Only Show Contract Items That Had Major Impact On Gross Profit

Mar 10, 2014

seeattached data set.

Contract Item
Gross Profit
GP %

[Code]....

It is Gross Profit in Dollars and % for a particular project. Each row is a contract Item. The Overall Gross Profit for the month in dollars is 34,114.86 In preparing a short commentary to discuss this 34,114.86 I need to discuss atleast some contract items. If there were no negative results I have often in the past simply written. The top 5contributors to this Gross Profit were contract items 1 -6, out of 42, delivering 80% of the result. I might also go into what actually those contract items were and why they presented such a decent Gross Margin, ie. Costs came in well under budget(estimate). But with negative results, the bottom 4 contract items represent a large dollar loss of-34k which is 100% basically of the Gross Profit itself. If these had even just broken even we would have a GP double the current amount. So they obviously deserve as much comment.

Q1
In excel orsimilarly in say Crystal Reports what is a good way of further sorting these 42records either in a table or chart, whereby say the top 80% contract items that had a major impact on the gross profit are shown and the rest hidden. Ie. All thelittle sub 1000 or sub -1000 amounts.

Q2
How wouldother people here write a commentary on this data set? Can you script something to illustrate?

View 3 Replies View Related

Filter With Formula: FILTER A Range And Display The Unique Items, One Below The Other, WITHOUT Blank Cells

Feb 10, 2008

How can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.

View 5 Replies View Related

How To Show Top 3 Items Per Year

Apr 10, 2014

Ok, so basically I've been asked to create a chart that lists the top 3 types based on count per year. I don't want to make 4 charts, but my top 3 types differ by year.

Type would be column #1, and Count would be column #2.

Type Count

1 7
10 6
11 7
12 5
13 24
14 2
15 7

[Code] .....

View 1 Replies View Related

Filter First X Items Of Pivot Table?

Oct 26, 2013

I've created a PivotTable using VBA that contains hundreds of PivotItems, which would look bad when a PivotChart is made.

I'd like to set the PivotTable to make visible only the first X items (let's say 10). How would I do this in VBA?The macro recorder gives me the name of the PivotItem, but this varies so I'd like to use an index:

VB:
ActiveSheet.PivotTables("PivotTable4").PivotFields("UWI").PivotItems("Item1").Visible = False
ActiveSheet.PivotTables("PivotTable4").PivotFields("UWI").PivotItems("Item2").Visible = False

View 2 Replies View Related

No Items Displaying In Data Filter At All?

Feb 6, 2014

I have created a spreadsheet copying and pasting data from other workbooks. When I select filter it all looks right but there is no items except select all which is unchecked, when I check it still nothing. I have added a screen shot of the sheet.

View 2 Replies View Related

Listbox To Filter Pivot Items

Jun 11, 2008

I'm running reports in one workbook on different types of spend for 12 business units using 1 worksheet containing the raw data, and 6 other sheets with pivot tables showing different levels of detail.

I've used simple VBA to prepare to standardise the raw data and refresh all the pivot tables with no problem

I need to filter the data to show spend for specific business units. I'd like to do this using a listbox showing the units where I can select the unit(s) to report on, which in turn will only make the units selected visible on each table in the workbookwith no other intervention.

There is another thread on here (showthread.php?t=55041) that shows how to use the list box to control 1 pivot table on one sheet but I can't find anything which shows me how extend this to cover multiple tables over multiple sheets.

View 4 Replies View Related

Show How Many Duplicates Items In Columns

Jul 13, 2009

I have a list of line items and I want to be able to see how many duplicates in Column A and B.

Column A has text field and column B is a numeric field

I thought I could use INDEX MATCH but I'm unsure.

View 2 Replies View Related

Getting Pivot Table To Only Show Top 10 Items?

Nov 29, 2011

Is there a way to have a Pivot Table show only the Top 10 items based on dollar amount. Data covers a month of daily activity (+/- 250 rows), but i only want the Top 10 items based on Dollar amount. Is this possible?

I know filters can do top 10 but it doesn't consolidate similar items.

View 5 Replies View Related

Show All Items Of PivotTable Field

Mar 29, 2008

I have a section of code that takes SO long, but I have to have it. Bascially, I need a pivot field to be set to "All", but there HAS to be a faster way. Here's my

Sub FloorCompareSetter()
Dim pt As PivotTable
Dim pi As PivotItem
Set pt = ActiveSheet.PivotTables("PinPointPivot")
' Speeds up code dramatically
pt.ManualUpdate = True
'Set the floor comparison for managers, coaches, and reps
' Make sure all PivotItems along line are visible
For Each pi In _
pt.PivotFields("Manager").PivotItems
pi.Visible = True
Next pi
pt.ManualUpdate = False
End Sub

Auto Merged Post Until 24 Hrs Passes;Also, note that I have used other techniques to speed up the process:

With Application
. ScreenUpdating = False
.EnableEvents = False
.Calculation = xlManual
End With

View 8 Replies View Related

Filter The Range Items Dispayed In A UserForm

Jan 31, 2005

As shown in the sample attachted Excel spreadsheet, I have a UserForm set up to display 2 colums of the range "Elist" using a ListBox. The Userform is called by a Button. I want my UserForm to display subsets of the "Elist" range thus restricting the users choices based on the results of a Filter operation performed on the Elist range. I wrote some filtering code that does select my intended subset of "Elist". I then use the initialize event of UserForm to set the RowSource of the ListBox to "Elist" hoping to display the filtered subset of "Elist". However, the ListBox continues to display the full range "Elist", not the desired filter subset.

View 2 Replies View Related

Show List Of Items Without Close Time

Nov 9, 2012

I have a spreadsheet which shows information based on what a person has picked and how long it took them to pick.

What I now want to show is an extract which will show - in a separate area - what shift & person still has not completed the pick (completed time section remains blank) together with the type of product they are picking plus the 'operation number'.

My current spreadsheet is as follows;

[IMG]C:Documents and Settingschristine.lawsonDesktop[/IMG]

Table shows as follows:

SHIFT
PRODUCT TYPE
MSN
OP NBR
PICKER NAME
DATE PICKED
START TIME
COMPLETED TIME
OVERALL TIME TAKEN
AVG LINES PER HR

BLUE
T&F
4
001
FRED
6/11/12
17:55
18:40
00:45:00
4

[Code] ........

As you will see from the attached picture/table there are 2 lines which do not have 'completed' times shown. It is lines, such as these that I need to be able to show in a separate area.

View 8 Replies View Related

Select And Unselect Items In A Filter In Pivot Table

Dec 30, 2009

I am looking for a way in VB to select and unselect items in the list for filters generated in a pivot table.item list. Ho do I do that?

View 5 Replies View Related

How To Set Selected Slicer Or Filter Items On One Pivot Equal To Another

Sep 26, 2013

I have two pivot tables, both of which source the same sheet of data. Each record in the data has two fields, Region ID of person and Region ID of facility, that reference the same list of Region IDs via vlookup (it's just numbers 1-12). Either one or both can be blank. One pivot outputs counts by person Region ID, and the other, by facility Region ID.

Using a combination of nested IF statements and vlookups, I tried making a third Region ID field that could be used as a slicer to control both tables, but what I end up with is an undercount in one of the tables. The only thing that works so far to output the correct counts is having two separate slicers, the facility Region ID being the slicer for one and the person Region ID being the slicer for the other. If the end user wants to see counts for one Region ID, they have to manually set one slicer equal to the other. But what we want is just for the end user to be able to control both tables just by pushing a single number, Region IDs 1-12.

I can make one of the slicers hidden but then how do I get the hidden slicer to automatically select Region ID values equal to the nonhidden slicer? Alternatively, I could somehow program a combo box or list to control the two different slicers, then the slicers would be hidden and the user would see only the combo box/list. (I guess in either of these alternatives, I could just use a report filter instead of a slicer; either way, I still have to get items in one to automatically select based on the user's selected items in another).

FYI, some of the options I looked up involved PowerPivot, which I do not have access to. VBAs/macros are ok.

View 2 Replies View Related

Excel 2010 :: How To Show Number Of Items In A List

Feb 3, 2012

The setup of my worksheet looks like this:

Excel 2010ABCDEFG1Tch grpTchr Split27B-MA5AWAWAWAWAWAW37B-MA4CB1,JDCB1,JDJD,CB1MMF,JDMMF,JDMMF,JD47B-MA3SXGSXGSZBSZBSZBSZBTchGrps

A great chance to use the HTML Maker for the first time!

What I would like to do here is show how many of each value there is in the range.

So for 7B-MA5, it would say 6. For 7B-MA4, it would be 2 / 1 / 3, since there are 3 unique values and their counts respectively. Finally for 7B-MA3 it would say 3 / 3

A formula option would be great but I'll also take a macro option since it is a macro that generates these lists in the first place, so I could just add the new code to the end of it.

View 4 Replies View Related

Sumproduct To Show Value Of Items Retrieved From Particular Location Per Month

Aug 1, 2014

I have a list of items in column A. Column B has each item's net price. Columns C-N shows the consumption of the items per month. Column O shows in which location the items are stored.

I need to do a sumproduct so that it shows the value of the items retrieved from that particular location per month.

If it didn't have to be by location, I would've simply done something like =sumproduct($B1:$B10,C1:C10) and copied it across the columns. How do I tell excel to sum per location as well? I know there is a simple solution to this, just not seeing it...

EDIT: I tried =SUMPRODUCT(($B1:$B10)*(C1:C10)*(O1:O10=$B1)) but it gives a #VALUE error

View 9 Replies View Related

Easily Hide/Show Pivot Table Items

Apr 5, 2008

I work at a trading firm and use pivot tables to report on the success of traders on a daily basis. I add daily trading data to a raw data table that powers a set of reports. In one report I want to view MTD stats for a filtered group of 10 traders. The issue is that if I add a set of daily data that includes a new trader name, it will automatically be pre-checked and added to this report (and this happens daily). The only solution I came up with is to add another column in the raw data table that would allow me to group these traders and then use a page filter to include only them. This will work but I'd rather avoid adding columns to an already unruly data table (and would like flexibility to periodically define and track an arbitrary set of traders).

View 4 Replies View Related

Advanced Filter - Extract List Of All Items But Only With Latest Date Of Each

Jan 20, 2012

What criteria can I use to filter a list on and item and the latest date?

I need to extract a list of all items but only with the latest date of each ...

View 3 Replies View Related

Pivot Table - Grouping Items (Date) In Report Filter?

Nov 11, 2013

I have a pivot table with the following items;

Report Filter = Project Names & Dates (filtered on 2 fields)

then the pivot table of data shows
Dept, Sum of Hours, Sum of Total ($), Sum of Days

When you click on the drop down to adjust the filter for the Date it gives you the whole list of dates, day by day as it is in the source data.

Is there a way to make it in the filter by month and year, the way it would in an ordinary filter. So if I wanted to have the pivot table show only the values with an October date I can, rather than having to deselect all and then individually check the boxes for the 1st through to the 31st of October.?

View 2 Replies View Related

Hide Show Pivot Column Items Based On Date

Nov 8, 2006

I have a pivot table with the column fields as dates. I will like to be able to use VB to dictate which value to show. Here is brief code in which I just recorded...

Sub Button1_Click()
Range("B7").Select
With ActiveSheet.PivotTables("PivotTable1").PivotFields("Date")
.PivotItems("10/30/2006").Visible = False
.PivotItems("10/31/2006").Visible = True
End With
End Sub

I would like to show current day only using =today() or something similar. THis would eliminate the user having to modify the pivot tables daily.

View 5 Replies View Related

List Box To Select Multiple Items In Report Filter Of Pivot Table?

Jun 19, 2013

I'm trying to use a List Box to select multiple items on my Pivot Table but I can't seem to get it to work. Its the Report Filter part of the pivot table.

When the list Box is set to fmMultiSelectSingle it work and selects the indivdual items, but I need it set as fmMultiSelectMulti for if i'm also needed to select multiple items. (which doesn't seem to work!)

View 2 Replies View Related

Excel 2013 :: Missing Items From Pivot Table Filter List?

Apr 1, 2014

Using Excel 2013,

I clicked on a field in my RowLabels

I then clicked on the Filter Arrow for the RowField

The SelectedField prompted with the correct field of 4 possible fields

However the item I am looking for is not in the list but I can plainly see it on the screen.

View 3 Replies View Related

VBA - Advanced Filter / Find Row Items To Remove Based On Multiple Criteria

Jun 28, 2014

I'm working with many rows of data (500,000+) and many columns. To simplify my question, I'm going to provide a simple example using made up numbers and only the columns I'm concerned with.

BillT Doc.ItemQty
F11231012.00
F2123205.00
S1123105.00
RE321202.00
F2321108.00
F2321201.00
RE321203.00
RE999808.00
F27771001.00
RE7771001.00

I am trying to remove the docs that have two Bill types that cancel each other out, where the qtys match and highlight the rows where the qtys don't match. The macro needs to have the positive and negative bill types programatically entered, where for example F1 and F2 are positive and S1 and RE are negative. Keep in mind the data may not necessarily be in order as it is above.

So for example with data above, the rows for doc 777 would be removed completely because the item numbers are the same, the qty is the same, and the bill types oppose each other. Doc 123 and Item 10 lines should be highlighted since their bill types are opposed bu their qtys don't match.

I hope this makes sense. I tired to achieve this using multiple loops and arrays, but ran out of memory when working with the entire set of data. I'm assuming their must be a better way to do this, I'm hoping some of the intelligent individuals here will be able to point in the right direction.

View 8 Replies View Related

Excel 2010 :: Pivot Table Dropdown Filter Hiding Items?

Dec 22, 2011

In the coming months the company i work for will be transferring from Excel 2003 to Excel 2010 (i know, a little late......) and now i am testing some things at home.

We deliver lots of Excel reports to our clients where we are using Pivot tables. In excel 2003 we where able to hide items from the dropdowns using properties - hide items but when i now open an excel 2003 file in excel 2010 and want to filter the pivot table to (let's say) another month i see all my hidden items.

Is there an option in excel 2010 to hide items like i could do in 2003? (either regular option or VBA)

View 4 Replies View Related

Organize From Vertical Organization To Horizontal - Show Blanks Where Items Are Not Found

Jul 9, 2014

I have a list of data that includes employee ID number in column A and a certain document that they have on file (onboarding docs such as I-9, W-4, copy of Social Security card, etc.) in column B. If one employee has 10 documents, they are listed with the same ID number 10 times in A1:A10 and the different document names are listed in B1:B10.

I want to clearly see which employee has which document by having the ID numbers going vertically in column A and then an X or check mark of some sort going across the rows.

The set up of what I would like filled in is in the sheet called "status" and the list of documents on file is in the sheet called "docs."check file.xlsx

I tried a combination of an IF and VLOOKUP with a MATCH function but I wasn't getting what I wanted.

View 2 Replies View Related

Compare 2 Excel Worksheets - Show Items Added / Removed And Modified

Jul 11, 2014

I have 2 worksheets in which the worksheet named Existing Items has a table consisting of list of items with their unit price & worksheet named New Items also has a modified table with updated items (some parts might be added, removed, modified or unchanged). I have attached the test workbook (Sample.xlsx) here for your reference.

I am looking for a macro that compares these 2 sheets with the Part Number as a Unique Identifier & displays the result in the following manner:

New items added in New Items -> List these items in the Items Added worksheet Items removed from Existing Items -> List these items in the Items Removed worksheet Items whose price has changed in New Items -> List these items in the Price Change worksheet Items whose price has not changed in Existing Items & New Items -> List these items in the Unchanged worksheet A Summary worksheet which shows the count of items added, removed, modified & unmodified

Note that I have already included information in the Existing Items, New Items, Price Change, Unchanged & Summary worksheets just for your reference but this needs to be done by a macro.

View 4 Replies View Related

Show Filter In A Header?

Dec 2, 2013

Is it possible to show a filter in a Header.

Example:

Column H has a list of names i.e. Fred, Barney etc.

Is it possible that when you select all the Barney names in header (the left one) shows the wording "Filter: Barney" ?

Just a thought only sometimes I have to filter and print off a sheet and the area with the names in does not get printed therefore a "Filter: xxx" would be quite useful.

View 1 Replies View Related

Filter To Show Only Text

Dec 14, 2006

i am using e2k and i have got to filter some data where the filter relevant data is in one column formated as "standard". it contains either only numbers or letters mixed with numbers. in case of a mixed cell the first symbol is always a letter.
i need a way to filter only those rows which contain a mixed cell. the filter criteria should be something like !=#*

View 2 Replies View Related

Filter List To Only Show Uniques

Feb 20, 2008

I have a list with many duplicate names in it, from which I only wanted 1 instance of each name, to be placed in another sheet. So, I recorded a macro that selects, from the sheet called "Data", column E (the column with the relevant list), copy/paste's it into sheet 3 in column A, selects the new column, and runs an Advanced Filter command on it, to identify and display all the unique names in it in the same place. It ran just fine when I recorded it. But then, when I deleted the data created by the macro and tried to re-run it, I got random data. I found that whenever I click on a different cell, it provides a different output. I only want it to select Column E, and copy paste that, not other random columns depending on which cell is currently selected. This is my

Sub Fetch_Unique_Names()
Sheets("Data").Select
ActiveCell.Range("A1").Select
ActiveCell.Range("E1:E2200").Select
Selection.Copy
Sheets("Sheet1").Select
ActiveSheet.Paste
Application.CutCopyMode = False
ActiveCell.Range("A1:A2176").AdvancedFilter Action:=xlFilterInPlace, Unique _
:=True
End Sub

View 4 Replies View Related

Show Name Without Duplicates Using Filter Data Using ListBox

May 9, 2014

I am filtering data using listbox (userform).

I want listbox show only names(without duplicates).

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved