I have a Pivot Table (pivottable1) starting from cell A1 (lets asume that this cell is "Pick up date"). What I want to do is to filter by each "Pick up date" one by one - for example by first date 2014-05-30 than do some stuff (I have this part of code so no worries) and after that pass to next Pick up date do the same stuff pass to the third pick up date and etc. The problem is that the number of Pick up dates can be different - sometimes it could be 10 pick up dates and another time it could be 150 of pick up dates. I suppose it should be some kind of loop but I have no idea how to start this.
I have a pivot table with a group # on the left, and team members on the right. There are multiple team members in each group, and each are on a separate line in the pivot table, like this:
Group #Team1chrisdawnsally2cassiechrisdawnkathysally3jimjoejohntomGrand Total
I need to find where "sally" is on the team (easy to do"), BUT I need to display the rest of the team members in the group with her, like this:
Group #Team1Sally, Chris, Dawn2Cassie, Kathy, Sally, Dawn, ChrisGrand Total
Using the concatanate function to put them all into one cell and then filtering for "contains" was all I could come up with, but there are 14,000 groups
I'm working on pivot tables using excel macro. Basically , I need to filter out the year submitted according to the current year . I did this to filter out my pivot :
For Each PivItem In _ PT.PivotFields("Year Submitted").PivotItems PivItem.Visible = True Next PivItem For Each PivItem In _ PT.PivotFields("Year Submitted").PivotItems Select Case PivItem.Name Case "2012"
[code]....
But this can only filter out year 2012 . I need to use this workbook for the next couple of years and I dont want to keep modifying the codes .
I am trying to create a Pivot Table that filters on a range of data.
I have a sheet with lots of data on it, and separate sheet where I have created my Pivot Table and my list I wish to use as the filter values.
I need to extract 630 specific Departments out of thousands and report the movements against those depts. The 630 will change as time goes on and I want to just have a range where I can update the values as and when changes occur. I initially tried using Filter on Department but realized this was going to be a very long winded process.
I have a pivot table in 2010- is there a way to filter the data using an external reference from the pivot table? I'd like to put the value in another cell and have the pivot update automatically when I type a new value in that cell.
The idea is that the pivot table always displays yesterdays data.
However, there may not be any data for that day, so when i tell the macro to filter for it, I get an error.
My question is, how could I formulate some sort of iferror statement so that if yesterdays date isnt in the filter list, then it does nothing (by default leaving the filter on last populated date)?
Using Excel 2007 I have a pivot table that counts that number of incidents based on month and year. To get the month and year I group the date field as months and years.
My problem is if I want to filter specfic months in say year 2012 it also takes out the month in 2013. I though it used to give you the option of year and date in the filter but mines are 2 seperate filters.
I am working on a pivot table just like the one on the picture here [URL] .......
Ideally I wanted the sums by date to be displayed horizontally and not vertically as shown in the picture, but was unable to do so. Anyways, I want to be able to filter those dates, so I can display data just from an specific date, and then change this date whenever I want and the new data will show up.
I tried doing by the checkbox that appears under the "data" dropdown on top of the column; However, when I uncheck a specific date, it dissapears and I have to add it again if I want to see it. Is there a way to keep the values on the dropdown even after I uncheck them? Or even another way to filter the information? Below is the pic of the dropdown I get when trying to sort the data, But as I said If I uncheck one of the values, it dissapears from the list.
Is there is some way to filter based on the value in a specific subcolumn.
Using the example of a list of salespeople and their transactions over the year, who sell multiple products, the PT is Sales Person name for the Row Labels, and Type of Product for the columns. The resulting PT has 3 columns, for each of the products - e.g. table, chair couch, and the Values are the total number of that item sold. Is there any way I can filter, so that I will see only those sales people who have sold 3 tables or more lets say. (Thus enabling me to quickly see what other products those sales people have sold.)
(The actual situation is a lot more data heavy than that - it is actually a list of donations for a non-profit, coming in from hundreds of people, across a dozen different categories; I am trying to analyse the extent to which people who gave for a particular category (Direct Mail solicitation) also gave across other categories.
So far I've manipulated things by inserting a '% of row total' value into the PT and then using countif/sumif functions outside of the PT to figure out how many people donated solely to this category (= 100% of row total), and how many donated to other categories too (= more than 0% of row total, less than 100%), which gives me a decent summary of sole donations to this cause vs other categories too, but doesn't visualise what the actual other categories donated to were. I've also investigated making a PT of the existing PT, but I'm not sure if that's even possible...)
(I'm using Excel 2011 for Mac, but if there's some other version that would make this possible, I may be able to use another computer.)
is there any way to NOT Displaying Items with No Data when filtering data in my pivot table?
For instance, I have 2 report filters: Category and Subcategory, when I select a category in the first filter I want to see only the options of subcategories with data in the second filter, I mean display only the subcategories of the Category previously filter.
Same scenario I have with a report with Directors and Organizations, when I filter one Director it would be nice to see only the organizations of this director and not all options on the data.
I've attached some dummy data. Basically, everyday I'm going to dump a report containing data into a 'Data Dump' tab. 'Pivot 1 - Filtered' I have set up so that it will show specific product IDs only (In this example I only want to see 1X, 2X and 9D).
However, I now have a need to see the total value of that order number in 'Pivot 2 - Autofilter'. (For Example, order number 1111 has both 1X and 8D contained within it). Now obviously the simple thing to do would be to filter every order number shown in pivot 1, and filter pivot 2 with them. However when I'm doing this for real, this can be tens/hundreds of order numbers.
The only workaround I have found is to put a column at the side using VLOOKUP and if ISERROR is false then include in pivot, then used an autofilter on that, but I'd like to keep the normal pivot if possible.
- a list of data - a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
I'm trying to write a macro that will create a pivot table, and am getting an Error code 1004: Cannot Open Pivot Table Source File "Sheetname". My code is below. I've tried to note what each section does, and it all seems to work well except for the Pivot Table creation.
I have a worksheet with two pivot tables, one of which is visible to the user. Ideally, the user should be able to change the "Row Label" field settings of the visible pivot table and then press an "update button" that then adds the same field to the second pivot table.
Ideally, the ordering of the fields should also be made similar between the two tables, though this is of less priority.
I imagine it would be something in the style of:
"If number of Pivot1 active row label fields = X then Pivot 2.AddRowLabelField = Pivot1.RowLabelField(X) end if"
attached is a spreadsheet 6 people in my area use daily(ive copied and pasted the sheet in question to a new worksheet, as the file was too big). Ive been trying for about 3 days now to make a pivot table to summarise this data.
I've filtered my data - such as selecting a date range - and then run the pivot, but the pivot ignores the filter and gives me data for all the dates. my workaround is to copy and paste the filtered data to a new sheet and run the pivot off that sheet. This works fine, but maybe I can avoid this step?
I have data that develops 3 to 4 pivot table each day. I would like to know if there is a way to change the date on one of the pivot table and have the other pivot tables date change to match with the first pivot table. At this time I am going to all 3 or 4 pivot table to select the correct date. The date is in the page position of the pivot table. I have attached a small sample of the data and the pivot tables.
One of the few flaws I have found using pivot tables is that when selecting from the the page field it does not filter the other page fields to match your current selection. It does in the actual table, so why not the page fields?
For example we have a pivot table like the following |Country| (ALL) |City| (ALL)
|Count of People| |YEAR| ________ |Gender| _______________Male__________Female 2008__________1000 _________500000 2009__________9999999_______1
If I select England from the country, when I go to select a City I do not want to be able to select only the cities in England and not every city in the world.
The Attached File shows you how to deal with this Problem.
I have a pivot chart, filtering data from a pivot table, the problem I've got stuck is that every time I filter the chart the colors and weights of the chart change to default values, not what I want, I've managed to every time I click on the pvt cht tab it updates with the colors and weights I want, but when filtering I don't know how to do.
I'm running a pretty huge database with Part Numbers across several Suppliers which fluctuate constantly.
For example: a HEXAGONAL BOLT may have a Part Number ABC123, but depending on the size of the bolt it could be a ABC123-001 ABC123-V28 ABC123-40mm (etc)
There's a lot of data (some of it sensitive) so I don't want the users to see everything - I'm creating a front-end sheet and am looking for a way for a user to type in the Part Number "ABC123" into cell A1, then the Pivot below to auto-update (with Part Number on the 'Report Filter') to show all variations of ABC123, including ABC123-1 ABC123-2 etc - i.e. not an exact match; everything that contains the characters in cell A1.
The relevant information has been ported in and password protected on a sepearate sheet within the workbook, so it's literally a code to make the cell value affect the filter.
I need to set up a scroll table with filtering capability.
In the attached (see Dashboard tab) you will see two tables, the lower one titled "List of Punch Items" needs to be able to look in the "Punch" tab and return the respective column values based on the value selected in cell (Dashboard!B3).
For example, if module M103 in chosen in B3, the punch table should only pull data relevant to this module.
Secondly, I need to add a filtering option from the drop down list in cell B24 that will filter for the different categories (Column H in punch tab). The attached has an example of what it should look like.
I'm trying to write a macro that filters a table via textbox (criteria), specifying the column to filter through a combobox. I managed to get it to work with every format (date, text, etc.) except with numbers. I'm attaching the file so you can take a look at the code.
If I have a column containing numbers but the cells have text format and I reformat those cells to numbers (using points to separate thousands [I'm from Venezuela, we use dots, not commas]) the results aren't visible unless I modify each cell individually. How can I avoid this?
Lastly, I'm using a macro that I found online that sets invisible shapes on each cell of the header and asigns another macro to these shapes to sort by ascending or descending order in the column over which the shape is put. I made some changes to the macro that actually sorts the values and it works fine, but sometimes I have to resize the shape (on the left side) so that it's further inside the cell or else I'll get an error.
EDIT: It doesn't work with dates either!
EDIT2: I tried copying the table and the codes to a new workbook and now magically it works with numbers, but still not working for dates. Also I'm still having to resize the invisible shape (only in header of the first column ('C')) and the changes in format still aren't visible unless I modify each cell. I think this last issue has something to do with 'SortOneTime' macro or the 'Ordenar' macro because it happens after I run them.
I have a pivot table in the first sheet which includes the field "Date" as a column label.
In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.
I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.
note that the field "Date" is used as a Column label, i.e., it is not a Report filter.
My input data for Pivot table has a column named "Month". The month values are like April 07, April 08, Nov07 in random order for period between Jan 07 to Aug 08.
When I create a pivot Table, this column is sorted alphabetically (April 07 is followed by April 08) but I need it to be sorted in the ascending order with respect to month (April 07 is followed by May 07).
I further use this data to plot a Pivot Chart. There is another issue here. I want to use separate colors for each series. I do not know how to achieve above 2 things.
I have a pivot table that I created and now I want to use the same pivot cache to create another pivot table instance on a different worksheet. how can I do that? My first worksheet gets saved as "OO By buyer" and now I want to create a new worksheet and drop the next pivot there.
From a table like the one here, how can I generate a list (without spaces) of all the names only? Perhaps filtering by "Mr","Miss","Dr" or something? The result I'm after would be a column on a new sheet that ran:
Mr James Mrs Milly Dr McAllister Miss Aujard Mr Barker Mrs Stanley
I'm not grasping the Pivot Table correctly. I've written code to create a sum of values based on a worksheet. Specifically:LocationIDDeptSum of Hours Worked. Location, ID and Dept are rows. This effectively provides the aggregate values that I need based on the row groupings.Here's where this is falling apart. I need to create a new worksheet based on these values. I assumed the three row values - Location, ID and dept - would be in a hierarchy. It's possible they are, I just can't figure out the object model.
When I loop through the PivotItems collection of the PivotFields("Location"), I get what I need. However, I'm unable to determine how to loop through the child values (just for that location). PivotFields("ID") returns all IDs. I can't figure out how to return only the child entries for each pivot item. GetPivotData hasn't been very useful for this. As far as I can tell, GetPivotData, while its return type is listed as Range, throws an error when more than one cell is returned. Worst case, I suppose I can just parse the data in the DataBodyRange of the pivot table - maybe not, I haven't tried that. I'm hoping there's a way to iterate through these collections, but based on what I've seen from Google searches, there may not be. Does my pivot table need to be rearranged? I suppose I could also just dump this data into a data table
