Sheet 2
Sheet 3
Sheet 6
Column B
Column C
Column A
Column C
Column B
Column C
RED
50000
[Code] .......
Is it possible to put any formula on Sheet6 to the Column B & Column C which will get the correct results with given sample above?
I am trying to use an array formula based on column A of sheet 1. Also using column A of sheet 1 last row ref for Sheet2 Array formula.
I have attached the document in here "Sample.xlsm"
When I run the macro for the dates, all I got is just "Date". I just want unique dates using the array formula which work without using VBA but the column A in Sheet1 is a dynamic sheet.
I'm trying to insert the counta formula in the sheet "summary". The number of rows in the spreadsheet will sometimes change which is why I'm using the End(xlDown).Select feature. The end goal is for the code to insert the COUNTA formula for each column in the summary spreadsheet, and at the bottom.
Code to insert formula into bottom of Column A:
Range("Summary").Select
Range("A1").End(xlDown).Select
ActiveCell.Formula = "=COUNTA(Range([A1],Range("[A1].End(xlDown)")))
im trying to count all the cells with data in sheet 1 column g but it must omit any cells that have "vs" in it. all cells have scores in like 1-1 2-2 2-1 etc but a few have vs in them and i dont want them counted
View 5 Replies View RelatedVBA which would count data in Column F of dump Sheet and paste the count in master sheet B2 Cell.
View 7 Replies View RelatedI want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.
But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.
E.g
Large Parts Current Stock = 50
(enter in) Large Parts Used = 2
Large Parts Current Stock = 48
(Clear field where 2 was entered into Large Parts used)
(Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
View 6 Replies View RelatedI am trying to come up with a formula that will count everything excluding 1 in one row, while looking at another row to determine the group.
The attached example explains things a lot better.
I am going to have 2 formulas. 1 for the "Big" group and one for the "Small" The formula needs to look first at the column that has the group in it. Then it needs to count everything is column A excluding "Snake" And return the value.
I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.
View 4 Replies View RelatedI have a transactional data set with a line for each transaction and I am looking to count the number of documents (each contains multiple transactions) against criteria.....
It looks something like this.....
Column A Column B
Document No Category
11000001 A
11000002 B
11000003 B
11000002 A
11000001 A
Is there anyway to do this without subtotalling for each document and then a count?
I have been using the wrong formula to count total entries in columns and only just found this error. The MAX formula in cell B4 is: =MAX($B$12:$B$36). If the all the rows are full within range F12:F36, then the MAX formula is fine to count the total within range B12:B36 (25) so I thought. But sometimes there are omissions between F12:F36. If there are 2 blank cells anywhere within F12:F36 for example, then B4 needs to show 23 respectively. In the sample WkBk B4 needs to show 8
View 2 Replies View RelatedI have a file where I want to count number of cells where the value is greater than 0. in the attachment, i just want to populate that count below the column indicated therein. So in the example, desired result is two.
View 4 Replies View Relatedin writing a formula that will count the number of times
the store is listed (Column B) when it matches with closed (Column C).
On the table listed below I will return the data using a match.
From this table
A B C
1/8/2006 9:45Store 1Closed
1/8/2006 9:57Store 2Closed
1/8/2006 10:05Store 3Closed
1/8/2006 10:09Store 4Closed
1/8/2006 10:15Store 5Closed
1/8/2006 10:24Store 1Closed
1/8/2006 10:36Store 2In Progress
1/8/2006 10:41Store 3In Progress
1/8/2006 10:50Store 4Closed
1/8/2006 10:58Store 5Closed
1/8/2006 10:59Store 1Closed
1/8/2006 11:15Store 2Closed
1/8/2006 11:22Store 3In Progress
1/8/2006 11:24Store 4In Progress
1/8/2006 11:33Store 5Closed
1/8/2006 11:51Store 1Closed
1/8/2006 11:56Store 2Closed
1/8/2006 11:57Store 3Closed
1/8/2006 12:03Store 4Closed
1/8/2006 12:16Store 5Not Started
1/8/2006 12:23Store 1Closed
1/8/2006 12:28Store 2Closed
1/8/2006 12:57Store 3Closed
To this table
A B C
1/8/2006 9:45Store 15
1/8/2006 9:57Store 24
1/8/2006 10:05Store 33
1/8/2006 10:09Store 43
I am want to copy a formula across several work sheet and have the formula always take data from previous work sheet.
2) I am working with this formula =C12+INDIRECT((MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)-1)&"!"&"C12")
and it comes from this thread http://www.excelforum.com/excel-gene...orksheets.html. I have included a worksheet attachment that has explanations
I have a spreadsheet that keeps track of document collection.
Column A is document name
Column B is department name
Column C-N represent quarters of the year. Ie 1st qtr 2012, 2nd qtr 2012 up to 4th qtr 2014
Conditional formatting changes the row to red if the last day of the qtr is less than today showing those documents as past due.
I mark the Cell "Good" if the documents received meet quality checks.
What I would like to do is:
Create a formula showing the present completion percentage by department.
The trouble I'm having is discounting the future cells that aren't applicable until they become past due.
I thought just counting the red cells and green cells but I can't get any of the conditional formatting counting codes to work for me. Tried pearson's CF vba and similar.
In one cell I can get the CFColorIndex to work and pull back the color index but in another cell trying same syntax trying to get the color index of a different cell I get #Value. CountCFColorIndex I just get #Value no matter what I try.
Can I count blank cells in a range if the Qtr ending date is less than today?
Would I have to have a multiple if formula to capture each qtr?
I know excel has a built in function for this. But it won't do what I need for this below.
Say, I have 9 worksheets open. In cell N7 on sheet 1 I need it to count the worksheet tabs.
But the dilema is to only count the tabs that will equal sheet 1, sheet 2, sheet 3, sheet 4, sheet 5, Notice, I have a space before the number. Other sheets have a specific names to them which I do not want to count.
So if sheets 1 thru 3 are visible with the other named sheets visible cell N7 will count 3
I have a list of words in one column, some of which feature more than once, in random order, i.e.:
Bird
Plane
Superman
Superman
Plane
Superman
Bird
Plane
I want to have a function that counts the number of times each word appears, so in the cell next to each entry for "Superman" it would say 3, for "Bird" 2 etc. If I add another "Superman" it should then change to 4 next to each entry. Also, I will be adding new words all the time, so the function needs to be able to cope with that too.
I am maintaining employee attendance in day& night wise in month. in this two type of Employees are worked ( EMT & Pilot) Day & Night but i want to
How many EMt's R Worked in day ?
How many Emt's R Worked in Night?
How many Pilot's R Worked in day ?
How many Pilot s R Worked in Night?
How many EMt's Take Off, Leave? And also Pilot R same
Below mentioned type i was using format
NameDesigLocation21-Nov22-Nov23-Nov24-Nov 25Nov26-Nov27-Nov28-Nov29-Nov30-Nov
S H Kumar AngarakulaEMTAddatigala / ITDANN
Satya Rao KakiEMTAddatigala / ITDAOffD
Venkata rao SurabattulaEMTAddatigala / ITDADOff
Srinivasa BhomidPilotAddatigala / ITDANN
VV SATEESH KOTHAPALLIPilotAddatigala / ITDADD
I have a macro that loop over 15 sheets and count the blank fields in these sheets.
I was trying to find a macro that delete these sheets that has the count = zero
I have a master sheet which shows from Jan to Dec (in 1 sheet), so I did a break down on each tab e.g Jan (First Tab), Feb (Second Tab), etc.
So basically now i have some cells that are blank, in the breakdown sheet which i copied from the master copy.
i use counta but it returns me 140 instead of 130(manually calculated). im guessing that is because in every cell of Jan tab i have "=master!D1" in it.
how do i formulate a proper formula for this?
I need to only count the black Names
A1hey, Lisa234Jerome, Reginald5XX67Mart, Angela8910Mcbean, Princess11Transferred to Robert B1213Moore, Kim141516Moran, Pat171819Rick, Crystal202122Rap, Michelle232425Reyes, Hey262728Richard, Step293031Roberts, Best32Transferred to Robert H3334Robinson, Jones353637Jones, Jose3839
how can i count the number of filled rows and columns (containing both characters and numbers) in a worksheet through a macro? do not tell the individual functions like count or CountA.
View 5 Replies View RelatedI would like to find the values and count duplicates on a sheet. Here is my example:
A1
A2
Organization1
Organization2
XXY
BBA
ACC
XXY
BBA
ABC
I would do countif, but I do not know my values (this is from a report that I ran from a database) and it would take too long to find all the individual values every time I needed to run this report. So this is what I am looking for (a graph would work too).
A3
A4
ABC
1
ACC
1
BBA
2
XXY
2
Looking for the formula needed to transfer data from one tab to another just by adding a meal count. On the attached file for example:
When I add a meal count in D1 on the Fry Prep Board I would like column B to populate with the associated columns from the Fry Pars.
I just need the formula for one cell and I should be able to complete the rest, I believe it would be a VLOOKUP formula?
How to count the bolded cells In an excel sheet using the formula
View 1 Replies View Relatedapply a count to a sheet which adjusts when filtered. I have attached a sheet, but as you can see the filter is returning the incorrect count as it is including the rows which are not displyed
View 2 Replies View RelatedI have a worksheet with like lots of color coded tabs and the tabs increase everyday. The tabs are categorized based on 6 colors. I created a first tab in order to give how many tabs i have another each color. Is that doable in excel. Do I need a macro for this.
All I want is each time i open the excel sheet the first tab will be automatically updated with how many tabs I have under each color instead of me counting the tabs.
refer to attached file.
I have monthly sheet Jan,Feb,Mar.....Dec.
I also have Summary Sheet, Cell A85:C96 is labeled as Jan,Feb.....Dec (Vertical) Cell B84:E84 refers to Store1,Store2,Store3 and Store4.
I need a formula to summarize the monthly value for each storein row 60.
Sheet 1 is my main page containing all my data, full of formulas and is protected. Sheet 2 is a simple sorting page with no color and is simply for sorting and printing.
Sheet 2 has IF formulas refrencing rows and cells on Sheet 1.
Example Sheet 1 A2= Bob
Sheet 2 A2="" until I put in this formula:
=IF(Sheet 1!A2="","",Sheet 1!A2)
Now Sheet 2 A2= Bob
Simple...
But when I delete a row in Sheet 1 (using my cool new macro...long story)
I get #REF! in the cells on my sorting sheet, as I should I guess, because there is no more row there to reference. It's annoying, but what do I do to fix it without just unchecking the #REF! in autofilter on Sheet 2.
I just want to eliminate #REF!
Do I need to put something else in the IF formula?
I have a macro that adds a row with predefined formulas and formating. The macro is launched by clicking on a button. However, I would like to make it possible to add more than one row at a time. My plan to do this was to use the number of selected row as input to the current macro. If the user selects row 1,2,3 and 4 (or 15, 16, 17 and 18, and so on) four new rows should be added. I would just add;
View 3 Replies View Related