I have data in different columns in the excel sheet which i want to use to print labels to be pasted on the envelops in the form of address.
For example : different columns are :
Dr.G.C.AgarwalC/o Sh V.K. Jain, 6/97, Kachora Bazar, BelanganjAGRA2820040562-22111399457003138
And I want the address as :
Dr.G.C.Agarwal
C/o Sh V.K. Jain, 6/97, Kachora Bazar, Belanganj
AGRA282004
0562-2211139
9457003138
I'm using Excel 2010 and I've got a chart on a worksheet and the worksheet needs to be protected. I'm able to manipulate the chart in any fashion EXCEPT the position of the Data Labels. Is this a bug in Excel 2010?
View 3 Replies View RelatedI'm using Excel 2008 for Mac & cannot figure out how to add a data label to an XY scatter plot that comes from a 3rd, separate column.
I have 3 columns of data: (A,B,C)
Labels, X values, Y values
When I select the Data Source for the Chart, there is a greyed out box for Category X axis labels, which is where I remember such information going in PC versions of Excel I used to use.
From the formatting palette, the only options to select for labels add the values of column B, but I need the reference from column A.
I'm not familiar with macros or visual basic. How to add these labels? This is Mac, Excel 2008.
I would like to print a excel sheet and each time I print this sheet
a new number would be place on that printed sheet.
Like a invoce number.
So if I would print 50 sheets it could be number from 1 to 50 on each sheet
or if I printed 10 sheets it would be number from 1 to 10?
In A1 I have the time (military h:mm) 8:00
In B1 I have the 30 min braek we take at work 0.30
in C1 the end of shift time (16:00)
In D1 total hours (formula : = sum(C1-A1)-B1
and it is OK EXCEPT if the employee has the day off.
In that case A1 and C1 are empty but because of B1 I get in D1 the terrible ####
How can I remedy this ... this sheet cannot be edited in anyway. ( I cannot delete or edit anything)
Thought of an IF but the #### are not a value so I cannot do much in the way of conditional fprmats ... how not to show these #### when the sheet is printed.
I have a print macro that runs from a command button, when I use it the workbook goes to the sheet printed. Can I somehow make the workbook go back to a sheet of my choice? Here is the macro, The command button is on a sheet called Control Center, can I return to that sheet or stay at that sheet when I print?
Code:
Sub Button16_Click()
Sheets("OBS1").Select
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
End Sub
I need a method or function that can count the TOTAL number of pages to that will be printed. I don't need anything with HPageBreaks or Get.document(50, ""sheet name"")") for these don't seem to work on my worksheet.
All they seem to do is give me a number lower then the number of pages that will be printed and they are dependent on where the active cell is.
Here is my code that does not work.
Code:
Agreement_Page_Count = ExecuteExcel4Macro("Get.document(50,""Signature Page"")")
and
Code:
Function HowManyPagesBreaks(sSheet As Worksheet)
Dim iHpBreaks As Integer, iVBreaks As Integer
Dim iTotPages As Integer
With sSheet
[Code] ........
Both codes return 2 when there are 3 pages that can be printed. Unless I pause the code select the cell at the bottom of my sheet (it ignores it if I use use a macro to select the bottom cell) and then continue my code.
I've tried it with and without the entirerow.hidden.
Is there a way of bypassing everything and using a marco to open up page preview and getting the total number of page to be printed? I'm using excel 2010
First, all charts are complete and visible in Excel, the problem is Printing. This is very hit-and-miss as to how many spanned pages can be printed.
Sometimes I can span over 4 pages, other times I can't do 1.5
The only think I can think of is some kind of memory issue - either Excel, Printer, or Windows. However, that is not obvious either.
We are using Excel 2007.
I wanted to add the date of the last modification of the file to the printed pages, so I googled how to do it and found a useful answer on this from from 10 years ago. It said to press ALT+F11, then on the left side go under VBAProject, there go to ThisWorkbook and there paste the next code:
Code:
Private Sub Workbook_BeforePrint(Cancel As Boolean)
For Each wk In Worksheets
With ActiveSheet.PageSetup
.LeftHeader = "Last Modified on " & ActiveWorkbook.BuiltinDocumentProperties.Item("Last Save Time")
.CenterHeader = ""
[Code]....
Then I saved it and closed. Like I said, it worked perfectly.
The problem is that when I open the file after closing it, it does not appear, and I have to paste the code again every time I open it. Not only is this not comfortable, it also counts as a modification, so even if I haven't changed the work sheets themselves, just wanted to open and print it, it shows today's date.
My question is, who to I save it permanently so it will remain always after the first time I created it?
While we're at it, if there's a way for that code to appear on every NEW Excel file I create automatically
I have the following code to print a selection of data which is fine but i need to have in the code a different printer. So, for example my default printer needs to stay the same but when this spreadsheet is open i need the data to be printed to another printer.
View 3 Replies View RelatedI have an export from a database that I'm bringing into Excel 2010 of about 30K records. Data points are recorded numerically and I have their associated text "value label" (what it would be called in STATA, for example, not sure what it's called in Excel). I want to create various charts/pivot tables with the data and want the labels to be the text label, not the number.
For example, variable ASSIGNMENT has the following possibilities:
1
2
3
4
Here's what each of those "mean" (I have this in another table):
1 - Sick
2 - Overtime
3 - Court
4 - Present
How do I create a chart or pivot table where the labels are "sick", "overtime", etc., and not "1", "2", "3", "4"?
I have a UserForm and what I'm trying too do is change the color property of all the labels on the form simultaneously.
View 9 Replies View RelatedI have a worksheet that is just a list of items with a location listed next to each item. I took that list and made it into a pivot table and would like it to have it list the items with each location it is in displayed across. I have already set it to tabular form in the pivot table options, but if there are multiple locations it lists them vertically and I want them list horizontally for printing purposes. I have attached a screen shot to explain.
View 1 Replies View Relatedmaking labels from excel file
View 1 Replies View RelatedHow to generate barcode labels in excel? I would like to have them ready for use (without "demo" or any similar text on them).
View 2 Replies View RelatedI have a chart with 20 series labels that are series 1, series 2.... etc. I want to label them with 20 corresponding cells but can't find how to do this in Excel 2010 (I seem to remember this being easy to do in older versions). At the moment I am having to click on source data and edit each label individually... Is there a quicker way?
View 2 Replies View RelatedUsing Excel 2007: I have a column graph whose numbers/labels on the vertical axis go from ($300,000) to a positive $550,000.
Question: How do I get the labels on the vertical axis to appear in the "accounting format" with the "negative numbers in red" and the "positive numbers in black or blue"?
I have tried to find the answer online and it appears to need to find Format Data Series, which I have been unable to do.
I produced several charts in Excel 2007. They display just fine when using Excel 2007, but when we try to open it in our office computers (which uses Excel 2010), the Axis and Legend Labels simply vanish.I know there's these fixes for Excel 2007, deleting a buggy MS hotfix or installing the KB2597962 fix. But the problem is, I need it to display in our Excel 2010 computers.
View 6 Replies View RelatedI am using Excel 2007. I have a population that I used to create a pivot table. I am currently double clicking on the value cells to create worksheets of only particular "row label" categories. I am then copying the "row label" information into the newly generated work sheet name tab. This works fine when I only have a few "row label" categories to do but it is tedious if there are many categories.
Is there any way to automate the creation of work sheets for all row label values and also naming each work sheet tab with it's respective row label information. Here are images of the pibot table and the type of work sheet I would like for wall row label values.
So I have a guest list workbook. There are two sheets. On the first one is a list of names on Column A. On Column B is a classification: 'C' if confirmed; "D" for declined; "I" for pending. I want to have all the names with "C" on sheet 1 appear on sheet 2 automatically.
View 4 Replies View RelatedI work for one half of a joint venture & am responsible for planning & expediting. The other half does purchasing. The bi-weekly PO download reports I receive are less than useful. I have already written the code to delete undesired sheets & add, format, and enter headers for a "Summary" sheet.
I need code to move to the next row, and run formulas to pull data from the next sheets, and repeat until there are no more sheets.
The number of sheets will vary from one download to the next, and the sheet names will vary from one download to the next.
Following are example formulas that need to be run on successive rows while pulling from successive sheets.
I am running Excel 2013 on Windows 8.1
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
I recently switched to Excel 2010 and have a rather peculiar problem.Every week I update a bunch of charts in different workbooks. By update, I pretty much mean just shifting the range over one column or down one row to incorporate newly added data.
So I right click the chart, select "Select Data", update all the Data series ranges and then I click on the Horizontal (Category) Axis Labels button "Edit" to update the Axis label range.
I do all that then press OK. The data series have updated, but the axis labels haven't. So then I do the procedure again for the Axis Labels, hit OK again and voila: It worked.
But I ALWAYS have to do this procedure twice. It will NEVER update the axis labels the first time around. Even though the little preview window below the edit button show the labels correctly.
I have created a UserForm that has a ComboBox and depending on the number selected I want it to show that number of Labels/TextBoxes...
So if I select "0" nothing is shown, if I select "1" one set of Labels/TextBoxes is shown, select "2" and two sets of Labels/TextBoxes are shown... but also if I have selected "2" and then select "1" I want the second set to be hidden again...
Also I know I should have renamed the Label/TexBoxes to make it easer but I was adding things and making it up as I went along...
I'm using Excel 2010 on windows 7.
Code:
Sub UnHide_NewRoutings()
If (Engineering.ComboBox2.value) = "0" Then
Engineering.Label4.Visible = False
Engineering.TextBox5.Visible = False
Engineering.Label9.Visible = False
Engineering.TextBox9.Visible = False
[Code] ..........
I have a file with a small example of sales and % of sales for about 7 persons.
I wanted to insert a pie chart but want to show labels inside the pie chart along with % of sales and the sales person name near each part. How to do this ?
I have attached a file : Book1.xlsx
I would like not to have zero value labels in a column piled graph (it writes zeroes between one piled column and another)...
View 7 Replies View RelatedI am trying to write an If statement that returns true if Valule is checked off in the Data Labels portion of a chart. I tried using a HasDataLabel properties but Excel didn't recognize that.
View 5 Replies View RelatedI am having a problem formatting a chart in Excel 2010. My chart has multi-level category axis labels, and I would like to have a vertical grid line separating each major group of categories. In Excel 2003, I could right-click on one of the gridlines and then specify the spacing I wanted between gridlines. In Excel 2010, as soon as I indicate that I want multi-level category axis labels, I get a vertical gridline between each category and I am unable to alter the spacing. If I deselect the multi-level axis label option, I can adjust the spacing between the vertical gridlines, but the axis multi-level label functionality is lost. Is there a way to fix this problem without having to resort to using the drawing tools or text boxes to achieve the desired results.
View 3 Replies View RelatedSee xls file. I have this chart and the data labels are percentages instead of the actual value. How did these get that way? Under Chart Options there is a autotext box that is there but if I uncheck it, the data labels go back to the actual dollar value and that autotext box goes away.
I am totally baffeled by this despite serach the help, the internet and this forum. I am sure it is something easy I am missing.
Can some one provide some color on this?
I cut this from a larger book with many tabs because I am not able to send out the entire thing (proprietary).