I am trying to get a list of all names found in a column but exclude duplicates... I know this can be done in a pivot table but I need the names in a drop down box... if I use the pivot table as the source it will pick up "Grand Total" as a name.
The number of people can increase from week to week...
I've got data for different regions of our company. For this example, what I need to do is count the number of jobs in the "South Atlantic" region (Column T) that are NOT "Wal-Mart Stores, Inc" jobs. In order to do this, I put a "1" in Column F so that the formula would have something to sum:
=SUMPRODUCT(--(T2:T1079="SOUTH ATLANTIC"),--(H2:H1079<>"WAL-MART STORES, INC"),(F2:F1079))
The problem is that some job numbers, which are located in Column G, are duplicated. As a result, this number is higher than it should be.
So what I need to do is only count each job number once. How do I do that? Is there a way to modify the existing formula? Or do I need something completely different?
I have a large spreadsheet where I've successfully ranked a large series of data based on revenue, using product classification as a criteria & summarising this on another page with the top 20 products. The problem I'm having is that within certain criteria's I have some products with the exact same revenue figure, so if the 2nd ranked product within classification "C" for example has revenue of $100, & there's another product within the same classification also with $100 of revenue, on my top 20 report I have results for the 1st & 2nd ranked product, but a blank for the third product & then results again for the fourth
The formula I'm using is
=IF(Y12="NA",0,SUMPRODUCT(--(Y12=$Y$12:$Y$6000),--(AC12
I am using Excel 2003 and Windows XP.
I have been given a list of my firm’s target clients (in excel) and an opportunities report (exported into excel) from our CRM system, which lists all the opportunities (i.e. opportunities to sell/provide products/services) that have been created for each client. Some of the column headings in the opportunities report are as follows:
Client; Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created etc.
What I need to do is lookup each client, from the target clients listing, in the opportunities report to see whether an opportunity has been created; and if so, return the row of values (i.e. the Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created) for that client. The result will be placed next to the name of the client in the target client worksheet.
I have a couple of problems. Initially I tried to use the VLOOKUP function to lookup the client name in the opportunities report and return the Opportunity ID (I then planned to use the same formula to return values from the other columns); however, as the client names in the target client listing were not always written the same way as they were in the opportunities report, the formula often returned #N/A. The formula I used was
=VLOOKUP(A8,'Opportunities Report'!A2:F51,2,FALSE)
So for example, the first client that I was looking up was written as “ABC Ltd” but in the opportunities report it was written as “ABC Limited”.
My second problem was that for some clients, there were multiple opportunities listed in the opportunities report. Where this was the case, there was a separate row (repeating the client name in the first column) for each opportunity created. I think that was messing up my VLOOKUP formula as well.
Is there a way to look up the client name, from the target client listing, in the opportunities report even if it’s slightly different and return the row of values for each opportunity created for that client on a separate row?
is it possible to leave a column out of this sort code as in A the very first column which just numbers the rows?
Here is my sort ....
The following attacted program is a name generator. It randomly generates names from the Roster sheet to the shuffle sheet (to be randomized) then displays it on the watchbill sheet. The problem I'm having is that the names seem to be repeating themselves before the entire list is used at least once from the roster sheet. I need all the names to generate at least once then have it fairly repeat the names (but not in the same columns on the watchbill sheet). Can this be done using the formulas I have? I've been trying to figure this out forever, its just a little beyond my level.
View 9 Replies View RelatedI analyze logged data that often contain ZEROS in column L, always starting on row 35. That's bad data. The first row with good data contains the number 700 in column L, but this row number is unpredictable.
How to make a VBA code to exclude the rows that contain the number 0 in column L, searching between cell L35 (including) all the way to the first row containing the number 700?
I need to limit the range to be scanned for ZEROS because sometimes there are valid ZEROS in column L, but those would be in rows below the rows contain 700 in column L.
I have two columns listing about 400 and 500 names respectively.
First Column has names in alphabetical order and the second column is random.
One column has names in this format: Last name, First name
And the other column lists the names as first name and then last name without the comma
I am trying to see if the list of names in one column exists in the other.
Is there a way to see this without changing the format of the names in each column? If so do I have to erase the comma?
Name Lists (1).xlsx
I have a SUMIFS function written that reads where some of my budget is coming from. I track several different departments but am only responsible for some of the departments' budgets. So i need to exclude two of the departments when the SUMIFS is reading the other parameters from my list.
From the example i attached, how would i go about writing the formula in I3 to skip the Cost if it comes from Dep 2 and Dep 4?
I have a worksheet that I want to export to a csv file. However, there are multiple rows that I want excluded in the export. These lines are recognized by the word "No" in column E. Is this possible?
View 3 Replies View RelatedI love this forum, and am usually able to find the help I need without bothering anyone However this one has me stumped and I wonder if anyone can help. It feels like it should be a fairly simple solution, but they can often be the ones that are most eluding LOL!
I have two columns; in column A are incoming telephone numbers and in column B are the date and time the calls were made. (I've put a few hashes in column A just to maintain confidentiality of the numbers, but in reality the cell is formatted as text in order to maintain the leading zero, and entries will follow the format 01234567890)
A sample would look like this:
0##6270####01-Mar-2009 00:01:440##6271####01-Mar-2009 00:03:020##6271####01-Mar-2009 00:03:040##6272####01-Mar-2009 00:16:330##6273####01-Mar-2009 00:30:490##6274####01-Mar-2009 00:55:470##6274####01-Mar-2009 01:06:170##6274####01-Mar-2009 01:07:420##6275####01-Mar-2009 01:08:360##6275####01-Mar-2009 01:11:410##6276####01-Mar-2009 01:13:45
Some numbers only call in once, I need to identify them as only called once.
Some numbers call twice, if they do I need to be able to show time it took between call 1 and call 2.
Some numbers call more than twice. For each successive call I need to be able to show the time since the previous call.
In my mind, the results table would need to look something like this:
NumberTime of callTime between
1st and 2nd call
Time between
2nd and 3rd call
Time between
3rd and 4th call
0##6270####01-Mar-2009 00:01:44Only called once0##6271####01-Mar-2009 00:03:0200:00:020##6272####01-Mar-2009 00:16:33Only called once0##6273####01-Mar-2009 00:30:49Only called once0##6274####01-Mar-2009 00:55:4700:10:3000:01:250##6275####01-Mar-2009 01:08:3600:03:050##6276####01-Mar-2009 01:13:45Only called once
Trying to compare a list of names in 2 columns. Column A has a short list of names I'm looking for in the long list of Column B.
How can you create the macro that does...
If any value in Column A matches any value in Column B
Then format (bold, highlight, etc...)
I'm looking to populate my Helper Column with all duplicates from my Data Column. Please note that my helper column needs all instances of a duplicate.
Data Column
Company ABC
Business DEF
Corporation GHI
Business DEF
Company ABC
Business DEF
Helper Column
Business DEF
Company ABC
Business DEF
The formula needs to be dynamic and it will need to be able to be copied down.
I need to remove the duplicates under column B for each item under column A and I can't seem to figure out how to do it.
I'm using Excel 2007; I would prefer a VBA solution, as I have to do this on a monthly basis. However, if a formula is the best way to go, then that's just fine. Either way, I'm preparing the data for a pivot table. I am unable to post the actual document in the interest of data protection.
Essentially, I'd like to turn this-
_ A B
1 Paris Bill
2 Paris Bill
3 Paris Mike
4 Paris Derek
5 Paris Derek
6 London Mike
7 London Bill
8 London Mike
9 London Bill
10 London Derek
11 Tokyo Derek
12 Tokyo Derek
13 Tokyo Derek
into this-
_ A B
1 Paris Bill
2 Paris Mike
3 Paris Derek
4 London Mike
5 London Bill
6 London Derek
7 Tokyo Derek
In other words, each city should have only one instance of any name that accompanies it; not all names will accompany each city.
My issue is that I have 1200+ addresses to make more readable - the first column is the street name, the second is the post code(s) relative to the street - what Ideally I'd like to achieve is one row per street, the street name followed by the post codes... i.e. take this...
A33 Relief RoadRG2 0RR
Abbey SquareRG1 3AG
Abbey SquareRG1 3BE
Abbey SquareRG1 3BQ
Abbey SquareRG1 3FB
Abbey StreetRG1 3AN
Abbey StreetRG1 3BA
Abbey StreetRG1 3BD
Abbots WalkRG1 3HW
Aberford CloseRG30 2NX
Admirals CourtRG1 6SP
Admirals CourtRG1 6SR
Admirals CourtRG1 6SS
Admirals CourtRG1 6SW
Ainsdale CrescentRG30 3NG
Alan PlaceRG30 3BW
Albany RoadRG30 2UL
to this...
A33 Relief RoadRG2 0RR
Abbey SquareRG1 3AG, RG1 3BE, RG1 3BQRG1 3FB
Abbey StreetRG1 3AN, RG1 3BA, RG1 3BD
Abbots WalkRG1 3HW
Aberford CloseRG30 2NX
Admirals CourtRG1 6SP, RG1 6SR, RG1 6SS, RG1 6SW
Ainsdale CrescentRG30 3NG
Alan PlaceRG30 3BW
Albany RoadRG30 2UL
i have a wordlist which i want to enhance. The wordlist contains of three columns A, B and C. Column A contains of source words, column B of grammtical specifications and column C contain of meanings for source words. The sheet containing this list is named "original" and it looks for example like
View 14 Replies View RelatedI need to look up the name in E2 in the list in column A and if it matches then lookup name in F2 in list column b, if it matches then the corresponding number in column C is displayed in column G. If neither names are in the 2 columns the words"Not on lists" is displayed in cell in column G.
The other problem is one name is spelled two different ways I want it to look for both spelling before moving on to looking up the second name.
I started with this formula but I'm getting #N/A or "not on list" when they are on the list. I'm using ranges prod_sum is columns AthruC, Last_name is range BthruC. =IF(AND(VLOOKUP(F4,prod_sum,3,0),VLOOKUP(I4,last_name,2,0)),"not on list")
I have a spreadsheet with two columns - one with names, the other with values. In some cases, the values column alongside a name is blank. Is there a formula-driven method (not a pivot table) that could produce a separate list of only the names that have a value in the value column? The formula needs to be dynamic, not produced via a filter.
View 7 Replies View RelatedThe following code works to update the target sheet based on matching column names within the source sheet.
However, I would like to bolster this by not only updating based on matching field names, but also the primary key in column A. Meaning the data from the source sheet isn't always in the same order (based on primary keys) as the data in the target sheet. So I want to keep the order of the primary key in the first column and then update matching field names in column B through the last column where the primary keys match between the source and target worksheets.
Sub CopyDataBlocks()
'VARIABLE NAME 'DEFINITION
Dim SourceSheet As Worksheet 'The data to be copied is here
[Code]....
I've got a spreadsheet with a column of company names. I need to search the entire column and retrieve the rows of any duplicate names.
I tried using :
cRow = ActiveSheet.Columns("D").Find(coName).row
However, it only ever retrieved the first instance of the name and not all the duplicates.
I'm using this formula to count the number of times this statement is in Column "D"
View 4 Replies View Relatedin column a I have dates and in column b I have names.
eg
A1 = 1/1/08
A2 = 2/3/08
A3 = 3/1/08
A4 = 3/1/08
B1 = Jenny
B2 = Jenny
B3 = Jenny
B4 = Pat
I am trying to count the number of instances of "Jenny" in January.
I tried =sumproduct(A:A,>=39448
I have a data set of property sales that represent properties sold twice over a period of time (each address is represented twice in one column but they are 2 different transactions and the remainder of the row data varies). I am looking for a formula or method to remove the duplicates, but I want to remove the duplicate that sold for less.
The entire row is not a duplicate, only the address. There is another column with sale price and I would want it to keep each address of the 2 (or sometimes 3) that is highest. I intend to use a pivot table to analyze and realized that the data is skewed because everything is showing up at least twice.
I have a column with text values, I would like to remove all the duplicates. How can I do that??
View 4 Replies View RelatedI have a column with something like 20 thousand rows. I would like a formula that basically checks the column for duplicates and numbers the sets of duplicates. So if there are 5 cells that are all "Server10" I would like for the formula to place a one next to all of those cells. And for the next set of duplicates it finds I would for it to place a 2 next to all of those cells. Essentially my end goal is to sort the sheet so that all of the matching duplicates are all together. There might be some simple filtering method here that I'm overlooking but if there is..... I'm overlooking it lol. And to be clear I don't want to eliminate the duplicates, I just want them grouped together.
I've attached a very simple example of what I would like the formula to do. The cells in the right column would be the result of the formula.
how to Delete Duplicates in Column D with a macro. It would search all of Column D and look for Duplicates and if it finds an exact value match it will delete one of the rows containing the duplicates. This is running in between a much longer macro which is the reason why I can't do it with conditional formatting.
View 12 Replies View RelatedI'm trying to create a macro that will Delete Rows of Duplicates found in Column D. It will start with the first row it finds that is yellow and check to see if that Column D matches any other yellow Column D's. If it does then the row the match is in gets deleted. Right now it searches in between the yellow rows, but for this portion I'm looking for it to use the yellow rows only. I included a file that has the examples on sheet1 and the expected outcome on sheet2.
View 6 Replies View Relatedhow can i remove duplictes from a colum. For example:
Column C:
A;B;C;A;D;E;A;G;B *(A is three times here and B two times!)
F;G;H;I;F*(F is here two times)
I would like to have the duplicates removed from each cell in column C so that each member is unique in the cell. The example would then look like:
Column C: (after removing the dupplicates A and B in first cell and F in second cell)
A;B;C;D;E;G
F;G;H;I
Hi, the code in the codebox under here, which I wrote, is supposed to delete all duplicate records in the column. Which column to uniquify is stated in cell Skin!B17. I searched the internet round, and there are different solutions everywhere. I have been unable though to find the right one - so I thought, why not ask here. If you have a solution, I'd be happy to hear it ...
View 14 Replies View RelatedI Have Data in my excel where i need to findout the Duplicates as well as unique if there are duplicates in the given column.
For eg In Column "M" if there are Five "ABC" so i need all the five ABC as a Duplicates and not only 4 ABC as Duplicates and one as Unique.
ABC
B
C
ABC
ABC
ABC
ABC
D
E