I have database so there's the masterfile then several tab (date). So I need to know what date each email address in Masterlist was entered. It's a huge data so I really need a formula that will get it. Also, some email address are entered in multiple and I need get it even if only one email address is in Masterlist.
I attached the sample worksheet.
sample todo.xlsx‎
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies View RelatedI've workbook contain Sheets 2716 having same column heading data in each sheet in 1st Row, also having some columns blank in between these heading so can you give me solution on it on the basis of column heading names below data in single sheet of all these sheets data.
Heading names as below
Product Name
Amount
sr no
DS
TS
Description
Qty
- I have total of 13 sheets in a workbook - 12 sheets represent 12 months with data; 13th sheet is single sheet in which i would like to get complete overview of 12 months
- each of 12 sheets has actually sales results for multiple products with following data: internal code, manufacturer part number, name, and qty sold in that month
- situation is that some products have been phased out during the year and some were introduced so each sheet is slightly different in terms of in which row certain product is located
What i would like to achive is to make 13th sheet (whole year overview) do the following:
- there is a list of all the products in it, each product has unique internal code - this code (from each line) should be used to find that code in each monthly sheet, then find its monthly sales value (copy it) and paste it in sheet 13 in cell that represents this product and particular month.
In other words i would like to see for each product what was monthly sales throughout this year, but avoid manually filling in qty for each product per month.
Can you use VLOOKUP or a similar formula to lookup and add (or even better average) multiple data from one sheet?. For example the source sheet holds certain codes for each of our agents and I need the total of one particular code for each agent and then eventually work out the average for the day. But as the source sheet can hold 30+ agents it would be a long and tedious job to do seperate Vlookup's (especially as we are backdating the last year!).
I have attached a snapshot of the source data to try to explain what I need better.
From that source data I need to get the total/average of all the 101 codes.
I want to have a primary sheet that refers to two another sheet in the same document.
Basically, the person using the spreadsheet will tell the first sheet what data they're looking for from within the dataset contained in the second sheet and the third.
The first sheet will then have an area which it outputs which data matches the criteria.
Here's some specifics. It's for Pathfinder Deities. The user will input which domains they wish to use and the sheet will output which deities, if any, will be appropriate to select.
The second sheet contains all the Cleric Domains and which Deities are associated with them. The third sheet contains the alignment of each Deity.
If it was not obvious, in the first sheet, the player will indicate which Domains they wish to use for their character as well as the alignment of the deity they wish to use. Once they've indicated what their choices are, the first sheet will show which deities are available given their choices.
I'd prefer to do this without using macros, but if it's easier to use them, then I'll just have to go for it.
The screenshots are too large to post, so I'll just post my project: [URL] ......
Creating macro which can read data from one/or more sheet and copy and paste it into another sheet, by matching up column A & B and Row 1, between the both sheets.
I have monthly data stored in each sheet, named as May, June, July etc. I also have sheet called 'monthly' within the same workbook, where I would like to extract all monthly totals, from sheets july, June etc, into the 'Monthly' worksheet by matching up its names from Column A and B and row1 header with each sheet's names.
The june,july worksheets have date1, date2 etc, columns with data and after those columns, there are the 'bs, rm, cm, cd, cl' columns, and these are the columns, I would like to use, to extract the numbers from and paste in the 'monthly' worksheet.
My current issue, is that the 'bs, rm, cm..etc' columns are not fixed, due to the 'date1, date2 etc' columns can vary, for each month.
For this current task, I was using a formula as shown below to extract the values into 'monthly' worksheet, however due to unfixed columns for 'bs, rm, cm... etc', I could not get the formula to work for the 'july' and 'Aug' months (i.e. extract data into 'monthly' worksheet, from the june&aug sheets).
[Code] ......
I would like to request, if it is possible to use the formula below to re-create macro which can carry out this task, by extracting all the values from 'june, july, aug etc' sheet, into the 'monthly' sheet, at once.
I have attached a sample workbook with example of data layout and desired output shown in monthly worksheet.
data_extraction2.xls
I have one sheet with 25 tables in it, And i want to extract the whole row from this sheet to another sheet based on values ( Office1, Office2, Office3, Office4 ) if appeared in thrid column "C".
- the 25 tables created on the 1st sheet to be in the other sheets as formatted as well.
- once "Office1" appeared in the original sheet in the 1st table, Action : copy the whole row to sheet named "Office1"at the top row in the first table.
- once "office1" appeared again in the original sheet in the 1st table, Action: copy the whole row to sheet named "Office1"at the 2nd top row in the first table.
- once "office1" appeared again in the original sheet in the 2nd table, Action: copy the whole row to sheet named "Office1"at the top row in the 2nd table.
- and so on, the same with other 3 remains sheet.
Basically, I run a DJ Management company, arranging bookings for 6 artists. What I'm trying to do, is have data be auto populated from the Master sheet, into separate sheets. The aim, is to create 1 master with ALL the dates for the month in, and the each of the separate sheets to only populate data relating to that artist.
For example!
Artist
Event
Location
Fee
Date
Tony
Tomorrowland
Boom, Belgium
5,000
01/05
[code]....
Now, I need to send the artists their individual schedules for the month, but I do not want to copy and paste individual rows to their new sheets as this is a pain. I know i can sort by artist and copy it easier, but really i just want to put in the info once and not multiple times.
So the master is sheet 1, on sheets 2,3,4,5,6,7 (each one assigned to a particular artist) i need the artists gigs for that month.
I am creating a spreadsheet for mutiple clients, which has around 5 columns. This spreadsheet will have 7 sheets on it. 1 sheet for each client, and the 7th will be to display all of the information together.
Basically I am looking to find out if this is possible?
I will try and explain a bit more, as above is just beifly what I am loking for.
I Have Client.xls
On my Tabs I have
Client1, Client2, Client3, Client4, Client5, Client6, All Clients
In Each individual spreadsheet, I have the following Columns
Incident Reference; Description; PMDB number
Each Day data will be entered into each client sheet, and I would like this information to be populated into the All Clients Tab. I am not sure if this is possible, and if it is, would I then be able to put it into the All Clients tab, and have it auto sort by the incdient reference column? As this is an autogenerated reference for all of our clients.
I need to use Excel 2007 in a stock sheet situation.
I have attached a picture of what the sheet will look like.
What I need is a formula that will take a value in column c and then add the value in colum a behind that. Preferably with a X or - between them ie.
If i took the first row and applied the formula it should kick out 5 x Jam
The main thing is it must output the answer to another file/page so that the main page stays the same. And if there is no value in Colum c it must ignore it.
I currently have an excel work book with multiple sheets per year. What I want to happen is that whenever I input data in one of the Year sheets, it will automatically go to the Master sheet.
See attached file for sample
Sample.xlsx
I have a spreadsheet with 12 tabs (one for each month of the year). What I need is a macro/function that on execution will pull all rows from each sheet that has the word "overdue" in cell E from E9 down. I need the whole row of data being taken into a new sheet.
So for example, in each sheet there could be the word overdue appearing in 30 out of 500 rows I need those complete rows (A to Y) being put into another sheet for ease. At the moment I am filtering each sheet and copying and pasting into a new sheet for each bloody sheet (LOOOONG way).
The worksheets are titled: Jan 14, Feb 14, March 14, April 14, June 14, July 14, Aug 14, Sept 14, Oct 14, Nov 14, Dec 14
Is it possible to create a summary sheet that includes all the data from many sheets (in 1 workbook)?
I have a workbook with several sheets of data that I need to have combined into 1 sheet that adds all parts and adds the quantities.
Example:
Sheet 1:
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
201632130-5011EASCREEN
201632130-50332EABRACKET
Sheet 2:
201632117-5092EASPLICE ANGLE
201632120-1034EASUPPORT ASSY.
201632121-5130EAFORMED PANEL
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
Sheet 3:
201632112-5011EAHINGE
201632112-5032EASUPPORT
201632117-5092EASPLICE ANGLE
Notice how there are a couple parts that occur in more than 1 sheet. Can a summary sheet combine all those parts into one master list and total the quantities for each part?
I have .Raw data in 3 different configurations, which can be opened in Excel.
I want to automatically extract relevant data (Columns) from these 3 different types of .Raw data before running analysis using chart using Macros.
Now here is the problem, Data from the .Rawdata needs to be accumulated. That is, I have multiple sheets of excel, which I have to open manually and extract specific data from individual columns onto another sheet to accumulate every data before running analysis.
How to tackle this situation?
1. Able to detect the right type .Raw data for use in Excel.
2. Extract data from many excel onto one main sheet, using Macros.
Download the attachment and have a look.
I want there to ALWAYS be 5 FREE/EMPTY rows to be able to enter data into them I also want the black area around the outside to ALWAYS be a further 15 rows in height below that.
Sheet 1 = Simple Example
Sheet 2 = A much larger example
Sheet 3 = Erroneously added data should still extend the sheet by 5 rows each time.
trying to copy data from multiple sheets to one single sheet. I am pretty sure this is possible. The problem I am running into is that the number of sheets at any given time is dynamic. The numbering of the sheets is from 000 to 999 (they must be a three-digit code). The other issue I am having is I only want to copy the rows in each sheet that have an "x" in column "A". Also, the row in which the first "x" occurs can differ from sheet to sheet. I have attached a copy of the spreadsheet that indicates how the spreadsheet is layed out.
View 13 Replies View RelatedI have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........
View 2 Replies View RelatedI recieve a daily spreadsheet with ~25,000 rows of data and is 4 columns wide. Each day I need to break the data equally up into 19 or 20 different sheets within the same workbook. This is very time consuming as I need to copy the first ~1,000 rows and paste it into the first sheet, then I need to take the next ~1,000 rows and paste it into the second sheet, and so on.
I have attached a small example with desired output. In my example, the raw data file contains 19 records. For these 19 records, I need to distribute the records evenly between 5 individual sheets. In this case, each sheet will contain 4 records or less.
I am looking to save a range of data from an input sheet, to a data sheet.
I know how to save indivdual cells to a worksheet in the form of a data
what i am looking to do is save A6 - J6 down A19 - J19, but only saving the data which is entered
A6 - J6
A7 - J7
The worksheet is formatted as follows: It contains data in columns A-L. I want to breakdown the data further into sheets according to the data that is found in column G. As an example, say I have 1,000 rows of data and in column G there are a number of different branch numbers in each row. So there may be 250 rows with branch 450, another 250 rows with branch 360, another 200 rows with branch 777, and finally 200 rows with branch 888. In this case I want to create 4 new sheets (450, 360, 777, and 888) and copy only the data in the main sheet that corresponds to same branch.
Actions would be as follows:
copy 250 rows to tab "450"
copy 250 rows to tab "360"
copy 200 rows to tab "777"
copy 300 rows to tab "888"
Any comments are much appreciate. I have attached a data sample along with desired output, if needed. One note: the data comes in each day as one single sheet of data and the number of branches varies day-to-day, as such, code would need to create new sheets for each branch found.
I have been tasked with creating a workbook that will take a time log file (excel) from an electronic time clock and import the dates/times into individual employee timesheets. The timesheet layout has already been provided to me and cannot change.
I’m really struggling here and would appreciate any help.
Please reference the attached workbook for the issues described below:
1) Sheet "1_attlog" is the log that is imported from the electronic time clock.
2) Sheet "Sorting & Filtering" is what I have developed so far that manipulates the data from sheet "1_attlog" into something that can be easily understood, it also matches employee #'s to a name, and allows for date ranges to be set that copies over to the individual timesheets. Please do not change any formulas on this page if possible.
3) Sheets "#2 Dan through #10 Blank" are all individual employee timesheets that I need to import the data from "Sorting & Filtering" and populate the "Time In" (column D) and "Time Out" (column G) based on matching the data from "Sorting & Filtering" sheet, "Time Clcok ID" (column D) "Date" (column E), "Time In" (column F), "Time Out" (column G), "Emp Name" (column I).
The dates on the individual timesheets have been linked to the "Date Range" (cels F2 & F3) on the "Sorting & Filtering" sheet, please keep this link intact.
4) The individual timesheets already have formulas inplace to calculate the hours worked after the "Time In" and "Time Out" data has been imported.
I am trying to populate a blank sheet with data from multiple sheets given a certain condition.
Scenario: I have multiple columns on each sheet, but only three of interest to me. The first column has a header "Part ID", the second column header is "Description", the third column header is "QTY". I want to pull the data from all three columns to the new sheet when the QTY for that column IS NOT 0. The three columns of interest are always in Column A, B, and C.
The only thing that may make it tricky is that the data doesn't necessarily start on the first row of each sheet. For example, the headers for the first sheet are on row 17, and the headers for the second sheet are on row 5. So on and so forth...
I have a sheet labled Parsed and a sheet labled Prices. The Data on the Parsed sheet is in W2:W1000. the data on the Parsed sheet, can have anywhere from one value to up to ten values in it. (again all sparated with a space.)
the data is separated by a space between each number value. I am trying to find a way to take the values from Parsed!W6 for example and separate the data into the prices sheet in to different columns. Some cells may be blank.
Example:
PARSED SHEET.
W
X
1
Equipment
[Code] .......
Currently I have 15 Prepaid schedule sheets that get pulled together as lines in a detail sheet. The way I have the detail sheet set up currently is that I have designated 200 rows for each prepaid schedule sheet, and then I manually changed the sheet reference in the formulas every 200 lines or so, for each prepaid schedule account. One such formula looks like this:
=IF(OR(H11="",H11=0),"",IF(OR(LEFT('Prepaid Gnrl Ins'!A11,8)="Balances",'Prepaid Gnrl Ins'!A11="Variance"),"",CONCATENATE('Prepaid Gnrl Ins'!A11," - ",'Prepaid Gnrl Ins'!B11," - For month ending ",TEXT(Menu!$I$4,"mm/dd/yy"))))
The result of that formula is this: Beecher Carlson - 11/1/11 - 4/1/13 - For month ending 02/28/2013
The detail sheet also includes a formula to find values to be expensed. that formula is:
=IFERROR(IF(HLOOKUP(Menu!$I$4,'Prepaid Gnrl Ins'!$I$10:$T$110,A11,FALSE)=0,"",IF(F11="","",HLOOKUP(Menu!$I$4,'Prepaid Gnrl Ins'!$I$10:$T$110,A11,FALSE))),"")
I'm trying to shrink down the over all size of this detail sheet and I would like to be able to write code with the syntax:
IF {HLOOKUP of value in menu sheet, find in column 10 of active sheet and offset by 1 (row 11)} contains a value THEN run all formulas (examples above) and paste into detail page UNTIL value in column A contains "Balances".
After finding the word "Balances" the macro would move on to the next prepaid sheet and do the same thing.
I have a workbook with 10 sheets.
Each sheets has data starting row 14 and column B with row 13 being column Headers.
I want to copy data from each sheet, having column headers suppose A, F & G in to a single sheet. The position of column headers I want to copy are different in each sheets
Means macro will go to sheet1 first, he will copy data from column headers A, F & G and paste in new sheet suppose main.
then macro will go to sheet2, he will copy all the data from column headerA, F & G and paste it in main sheet after the last used row and so on.
I have multiple data sheets with tables and I want to create a master sheet table that automaticly will update when now rows/data is added in to the sheets in any of the data sheets.
Master sheet will look like this (the first 3 letters is the data sheet name), this is just the first column there a a lot more columns to be added
AAB08
AAB09
AAB10
AAB11
AAB12
[Code] .......
So when let's say in sheet AAB I add another row AAD13 I want the master sheet to update automaticly so it looks like this
AAB08
AAB09
AAB10
AAB11
AAB12
[Code] ......
Is this possible?
I have an excel file having different columns. The test data is as under
Email HQ City Product Value
S@y.com XYZ BAC abc 10
S@y.com XYZ CAD bcd 20
S@y.com XYZ BAC abc 10
S@y.com XYZ CAD bcd 20
A@b.com XYZ BAC abc 10
A@b.com XYZ CAD bcd 20
A@b.com XYZ BAC abc 10
A@b.com XYZ CAD bcd 20
The above is sample data and the rows will change depending on data.
Based on email id the range should be picked up and the email should be send as a attchment.
I have an identical worksheet for all the days of the month - i.e. the May workbook has 30 identical worksheets. I am wanting to pull only certain rows from each worksheet onto a master. Something like - copy row from all worksheets where that rows cell "D" has any value other than " ".
I have used the following macro to pull all the data from every sheet onto a master - but i don't want all the data - just the qualifying data.
Sub Combine()
Dim J As Integer
On Error Resume Next
Sheets(1).Select
Worksheets.Add ' add a sheet in first place
Sheets(1).Name = "ALL"
I am not sure what the range "A1" is - i am thinking i can modify it to only grab certain rows.