I've finally found a good application for sparklines and I was playing around with formatting. I created a simple 4 data point sparkline and the cell where I put it is was blank. If I selected markers it would show them but no line. If I changed to a column sparkline it was totally visible.
View 5 Replies how to display Sparkline from non-consecutive cells.
I want to display it from two apart ranges: A1:C1 and F1: J1
If it can't be done within the worksheet - is there a VBA code to workaround - such as filling-in an Array from the non-consecutive and using that Array as the Sparkline source ?
I was wondering if it is possible to hide a column(s) but still have data in that column be visible at the bottom of the spreadsheet. For example, if I hide column G can it only hide the column from rows 1 - 50 and then the column will appear after row 50?
View 3 Replies View RelatedNeed to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
View 3 Replies View RelatedI have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.
View 1 Replies View RelatedI have a workbook that usually looks something like this
Category Product No description Price
Balloons 12345 Red Disney balloon .50
Balloons 12567 Blue Princess balloon .86
Balloons 76521 Angry Birds Balloon .80
Kites 23456 A Big red Kite .27
Kites 22222 A small blue kite .06
Banners 10000 Party banner .33
etc..
I need to find a way to copy the category below an empty row from column A and paste it in the blank row in column B . If possible to bolden the text but I could probably work that bit out myself. I'm new to this but have used VBA before to run macros.
Right now I am at Column D; From E to I columns are hidden in my worksheet and would like to move to Column J.
View 7 Replies View RelatedI want to sum filtered data from one column V and paste value into TextBox1 Goal for this code is that sum will be displayed into textbox automatically. Also i select data as last row Column "I"
Private Sub TextBox1_Enter()
Dim LR As Long LR = Range("I" & Rows.Count).End(xlUp).RowTextBox1.Value = Sum(Range("V2:V" & LR).SpecialCells(xlCellTypeVisible)).ValueEnd Sub
I have created a combination chart comprising a column and a line. The columns to the extreme right and left are half visible (I can only see half of the column).
Look at my two attachments to see what i mean.
Attachments:
Excel File: http://www.MegaShare.com/235337
Screenshot:
OR
http://img530.imageshack.us/my.php?i...icture1qi7.png
Note: I have cross-posted this thread in excelforum.com: http://www.excelforum.com/showthread.php?t=608124
ive added a filter, and on column A i want to find the first blank row under the header and type the word 'tech' and fill down to the last row populated against column b.
View 1 Replies View RelatedI am trying to count only visible cells where column AB = Active.
This is what I am currently have .
SUMPRODUCT(SUBTOTAL(3,AB2:AB1000),AB2:AB1000, "Active"))
I am attempting to have a cell highlighted if the adjacent cells are visible, but no highlighting when the cells are hidden. For example, Cell D1 is highlighted when cells A1:C1 are visible, but not when cells A1:C1 are hidden. (this is for the group/outline feature)
View 3 Replies View RelatedI am trying to resize a picture on a worksheet to fit a dynamic measurement(the size of the page is different depending on the contents in cells).
I am doing this all in VBA.
so what I have come up with is that I need to
1) determine the total column width of only the non-hidden(visible) cells.
2) resize my picture to those measurements, so I can get an exact fit, and it doesn't create a new page break, by going over.
I have found some code on forums, and am thinking of something like this as a solution(although I don't know how to complete it):
For summing column widths:
I am collapsing a field in my pivot table and it is hiding all detail behind it. The column that precedes it is a description of the account number. How do I keep the description visible when collapsing a account number.
View 1 Replies View RelatedI would like to select the visible cells, and then count down 50 rows in column A - is this possible?
Need macro that changes the text in a particular field. Previously, the column to change was column 46 (AT), but now the column is column 1 (A). If I adjust the last line and run the macro, I get this error message: "Compile error: Invalid or unqualified reference".
. AutoFilter Field:=1, Criteria1:="To be capped" 'TYPE
. AutoFilter Field:=29, Criteria1:="OPEN" 'STATUS
.columns(1).Offset(1,0).Resize(rng.Rows.Count - 1,1).SpecialCells(xlCellTypeVisible).Value = "Capitalised"
I have a database that holds thousands of names and the columns are of trinings that they have completed. I can filter by the criteria of name and of ID. ID number is unique so what I want is to know if Column F has a date in it once filtered. It maybe line 789 but that is all it shows because the filter is on.
View 2 Replies View RelatedI have many checkboxes (1 to 26) that I want visible or not, based on whether the cell states "n/a" (are in a column in a different worksheet). Rather than writing this code multiple times, I'm looking to condense the code.
[Code] .....
I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product
F1020
F1023
F1025
F1120
F1123
F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120
F1123
F1125
TO
F1020
F1023
F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
Tried this in a frantic effort
Selection.SpecialCells(xlCellTypeVisible).PasteSpecial xlValues
But got an error for " multiple selection"
I got to the point where the macro is doing (more or less) what I want.
I now need to run the macro for each line in column C.
Basically my macro is creating 9 lines in column E getting as input C1 only (for the time being).
How do I say to my Macro, please run in E, but the first time you run get as
input value C1, the second time C2 and so on until I've got values in C?
I've looked into the loop documentation (for and foreach) and overall it makes sense, but how to refer each time to the next line in C?
I have a list of 20 cities in K1:20 and they can be selected from a drop down menu in column A2:A22. I want then to randomly pick 6 out of 20 and these 6 cities must to appear in a line A1, B1, C1, D1, F1, and G1
On cell A1 I have used the
IF ( A2=K1,K1, IF(A3=K1,K1...................A22=K1,K1,IF(A2=K2,K2......A22=K3,K3)
It seem to be an endless formula is there another way to make it easy ???
As per attached file, there are altogether 4 sub-files and 1 master file.
I'll need the code to automatically pick up the top 9 revenue(highlighted in Green) and top 9 EBIT(highlighted in Yellow) by values in Column N from 4 sub-files and paste to the master file.
Attached File : Example file1.xlsx
How do I transpose formulas from a line to a colllumn?
View 12 Replies View RelatedI currently have a macro that does several thing, i want to add another task.
I need a row inserted everytime there is a change in column H from "0" to "F" only. The infromation will always start in row 8 but the last row is not always the same, it will be different every time.
ABCDEFGHI112345678223456783#N/A#N/A#N/A#N/A#N/A#N/A#N/A45B=Bi-WeeklyID type 2ID Type 308 GAPamount due6HCCompanyS= Semi-MonthlyCO#NAMEFORMER (F) or Current (0)78546WalreBbr55a234amy01009524WalreSn32m56daniel05001041WalreS589653jode0100011945WalreBef343456caryF2001212WalreSg5365M5665mikeF40013Grand Total2,200.00
I would like to make a graph in Excel, where I present both a stacked column and a line with two different axes. Including a clustered column and a line in the same graph with two different axes is easy, as this combination can be found in the custom types selection in the chart wizard. However, there is no such alternative as a stacked column and a line with two different axes. Is combining the two manually possible?
View 2 Replies View Relatedi have numbers in column A1:A556, i want to insert a row below every column that has a number so that they can have double spacing.
View 1 Replies View RelatedI have a data series plotted as columns. Then I want a horizontal line at $5,000 to appear all the way across the chart. It appears from the 1st to the last data point, but there is blank space before the first point and after the last point. I would like the red line to extend into this blank space before and after, so that it is going across the entire chart.
I tried playing around with different axis settings and no luck.
I have to worksheets: Sheet1, Sheet2. In sheet 1, I have some data like this (in first col is 1, second col is a, third col is c etc. ):
1 a b c d
2 e f g h
.
.
.
.
I need in sheet 2 in range A1(only in this range one big text), something like this: a,c,e,g ........ ( row1-col2,row1-col4,row1-col2,row1-col4 ......) ( separated by ","). The number of rows from sheet 1 is variable. The dataf a,b,c,d,e,f,g,h ... is some random text.
Here's a sample of a chart that I want; However, I want the bar chart to be a stack chart as I have multiple "Failure modes" per month that I want to show the number(or count) of failures per month. Then I want the line chart to remain the Complaint Rate for that month.
I just can't seem to figure it out.
This chart pulls from a data set that looks something like this: ....
I have a stacked column chart that I need to show an average on, that is on a second axis and shown as a line rather than a column.
I have tried moving it to a secondary axis but then it keeps changing the graph to show only the average.
this is just one of about 25 graphs I am having to do like this.
stacked 2 axis.xlsx