B15 has a formula which checks if one date is greater than another on the sheet. If that is true it displays a date, otherwise it displays empty text. A macro copies/pastes the date, if there is no date it copies/pastes the date in B14. This is what I have at present but of course it always sees B15 as NOT empty...
View 3 RepliesHow can I set a formula to populate a cell if another cell is non-blank? I want a cell to display a number if another cell is not blank.
I'm guessing its an IF formula but I can't get it right.
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
Below is a same of the data I receive:
25106009 7735469 word text text
25106521 7735470 word text text
Sales Best 15hrs
25106577 7735471 word text text
Florida Drive Certificate
I need to be able to identify if a cell is text (vs. numbers) and then select all the data in that row and paste it in the first empty cell in the row above. So my data above should end up looking like this:
25106009 7735469 word text text
25106521 7735470 word text text Sales Best 15hrs
25106577 7735471 word text text Florida Drive Certificate
I am trying to create a macro that will allow a user to click a button, enter a text string that will be an email address into a field and have it added to the first empty row in column A or column C on sheet 1. I have not been able to record this with the macro recorder. The input box will be in cell E9 on sheet1.
View 7 Replies View RelatedI'm looking for a quick and easy way to insert a value in the first empty cell in a multi-column, multi-row range using VBA. I suppose I could loop through the range, but the table could grow to immense proportions and I don't want to slow everything down.
For example, the new value should be placed in cell C4. It doesn't matter whether the range is looped through the rows or columns, either will work just fine.
A
B
C
1
5
65
56
2
32
12
89
[code]...
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
I am trying to concatenate entries into one cell so that when uploaded, the comma-separated contents will be treated as tags. copperberry sample file.xlsxSee attached sample file. Wherever there is a 1 in a row, I want to take the column header text above that 1 and concatenate it with subsequent text in the cell at the end of the row. See sample end result in cell J2. I assume I need an IF statement, but I'm not sure how to phrase it to collect all the concatenations needed. There are 200+ rows.
copperberry
Windows 8.1
Excel 2013
I wrote some code that toggles bewtweeen the word "Yes" and the function clearcontents.
What it does not do, is if you click on cell A1 and change it's contents and you click on the same cell again it does nothing. You need to click on another cell say A2 before you can go and change A1 again.
My code is as follows:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("Documents")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
If IsEmpty(Target) Then
Target.Value = "Yes"
Else
Target.ClearContents
End If
Application.EnableEvents = True
On Error Goto 0
End If
End Sub
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
IF cell(some cell) empty AND cell(Diferent cell) not empty then Put Formula in empty cell
Next (to go throught the cells because the range constantly changes with every new report)
I have the follwoing data:
A B
1 Job No. Job Date
2 33625 12/7/2011
3 Davis: Please contact Shine @ Prudential Insurance re: copy
4 336173/9/2012
5 Gaskill: Please contact Swiers @ SEC re: copy sale; emailed
and so on...
I would like to copy the text from B3, B5,B7 and so on to a a new column starting in C2 and then delete all of the empty rows.
I have files where empty textboxes have been copied over tens if not hundreds of times, thereby slowing down the scrolling speed immensely.
I would be interested if there was a macro to
a) select all empty text boxes
b) select and delete all empty text boxes
I need to compare some cells, but sometimes one or two cells can be empty (but sometimes none of them)
e.g. A1 = January
B1 =
C1 = January
D1 = January
E1 =
and I need to compare this cells A1:E1 and if text in not empty cells is the same then write TRUE to F1 and if not write FALSE.
I currently have created a form for the user to fill in details on my sheet. My idea is that when the user clicks a button, the macro will take that piece of text and populate my other sheet into the correct column. Therefore the task I am trying to resolve is copy the text into a field and then if the user clicks copy again, the text will fill into the field below as it is empty and so forth until the user has finished entering values. I have the following setps in pseudocode below but having trouble converting it to a macro!
View 2 Replies View RelatedI am having two problems ....
1) I have a field for which the user MUST enter text information. It can't be left empty. I set validation on the cell ... Text Length must be greater than 0. It still allows the user to hit enter without entering information without an error message and a retry.
2) In another field, the user has the option to enter (text) info or not. It can be left blank. The value in this cell, empty or other, is copied to another cell in another worksheet. The problem is ... the destination cell gets a value of 0 when the user field is left blank. The value of 0 in the destination cell can't be there ... I need that cell empty.
I'm having this problem whereby a few cells in my work contain empty texts. An empty text is represented textually in VBA with a pair of double quotation marks with nothing inside (I think).
This means that the cells don't display anything visible, but are not blank/empty.
So what happens is that formulas such as ISBLANK(), COUNTA(), etc. are returning unexpected results.
I am caught in an areas where I have learned how to find the next available empty row by going far down my worksheet, counting up until I reach a filled row and then offsetting that value by 1 as seen here below:
NextRow = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
My difficulty lies in assigning the cells in this empty row the data a user can input in my text boxes; let's say there are 4 text boxes which need to be put into the following cells:
Text box 1 (Text value) needs to be assigned next empy cell in column: AText box 2 (Text value) needs to be assigned next empy cell in column: B (1 offset away from A)Text box 3 (Numeric value) needs to be assigned next empy cell in column: F (5 offsets away from A)Text box 4 (Numeric value) needs to be assigned next empy cell in column: H (7 offsets away from A).
How would I go about using my identified "NextRow" and then plug in these text box values into their appropriate cells down that row?
I have many text boxes on a form and if any of them are empty then I want a msgbox to popup and exit sub. I know how to do the following
If txtExample1 is "" then msgbox and exit sub
if txt....2
if txt...3
Is there anyway to group the text boxes to test for empty so you don't have to list 20 textboxes
I am plotting a chart using data from custom functions. On occasion, the formulas return erratic values (due to the underlying data) which I wish to exclude from the chart. If the function does not pick up a value in the code, by default it returns a zero.I would like when this happens to have my function return nothing instead of a value - and I mean absolutely nothing, not a blank string. in this way, the chart line will totally ignore this point.
View 6 Replies View RelatedI am importing a 20 character text string (from a barcode scanner) to H2. I need to send that data to the next unused row in Column A (after insuring that no matching text currently exists in Column A-no action taken if matching data is found). I can provide a copy of the sheet, along with a description of the project.
View 2 Replies View Relatedtrying to add cells together that contain time (hours and minutes). The cell containing the total formula shows the #VALUE! result when and only when one or more cells being added do not have a value in them.
The times have been entered as actual times of the day, formatted for AM/PM.
A simple adding formula works fine, but all cells must have a value in them to obtain a valid result.
I attach a sample of the sheet.
When I look at the cell: wsEmpRec.Cells(10,50).Value in the VBA Watch window the value is Empty. I mean, that's the actual word that shows up. I'm trying to test if there is a value in the cell but when I use: if wsEmpRec.Cells(10,50).Value = "" then the condition is not being met. How can I test for an Empty cell as opposed to a cell that contains an empty string?
View 9 Replies View RelatedIs there a way to auto-populate all of the empty cells with the word "Need to Review" in a cell range (A1:A250)? Once any of the cells in this range is populated, whatever is inputted should house the cell.
View 9 Replies View RelatedWhen choosing ascending or decending, is it possible to always keep rows with the designated blank cells at the bottom? Trying to prevent the blank cells from popping on the top when i filter by a certain field.
View 4 Replies View RelatedI have a range that is filled with formulae and the the number of rows in the range with data changes as the formulae reevaluate the inputs. So the rows with visible data changes between one row and 200 rows. By looking at the output in the first column of the range, Col M and finding the last row where the formulae returns data, I need a way of selecting across the columns of the range (M1 through to Qi) where i is the number of rows that have data in.
View 8 Replies View RelatedI am developing a spreadsheet that, once all the code is run has numerous sheets added. On these sheets I have a significant number of rows that contain no data and could be hidden (I dont want to remove them, because later I need to re- import all these rows back to my master sheet). I tried code I found in the forum to hide a row if it is empty but this doesnt work as some of the cells contain formulaes referencing back to another sheet that is hidden.
I am trying, and failing, to write code to hide a row that contains no actual data, but still has formulas in some of the cells.