This counts all entries with the status "Contact Sheet Available/Disc Sent" and that have a timestamp within the current month.
I need to alter this to count the last week in September and the first 3 weeks in october (using this month as an example and will have to have to be able to run without changing dates next month).
How to be able to count cells with a specific color (green) and a specific value (8210) for example the sum of the info I am needing below should be 2 even though there are technically 3 - 8210 cells.
CELLS AA5:AA64 will have either EF, CS, SBS and/or, RP. Cell AA16 could be "EF / CS / SBS" and AA20 could be CS. I want Cell AA65 to count show how many CS's have been entered in that range. How would I do this.
in excel how do I count cells that begin with specific text. Ex: in a column with 100 entries, I want to count the number of cells that have the letters "app" from the word approved as the first three characters in the cell
If I have cells in my worksheet filled with yellow color, is it possible to count them based only on this criterion (fill color). They might or might not be in the same column.
I need to count the grey coloured cells in a column based on the value in a different column (Column I has the team that the person is in). I already have a code from a previous thread to count the coloured cells (below) but this doesn't work when using an array formula. I have also tried just selecting the cells I need it to count (the people within the specific team), but the formula doesn't work unless the range uses adjacent cells...
Is there a way of counting how many rows have cells containing a specific word. Some rows will have multiple cells with the word in and some will have none. I only want a count of the number of rows and not the number of times the word appears. How can i acheive this with VBA?
Is it possible to have a column count up if two other cells meet criteria?
What I would like to happen (if it is even possible) is, if cell B1 equals CO and C1 is a duplicate, then G1 enters #1 for the first time it is duplicated, #2 for the 2nd time it is duplicated, etc.
Is this even capable of happening.
I am attaching my spreadsheet (TAB "AG Orders"). I filtered the spreadsheet so you can see an example of what I am looking for. I manually typed in column G but I was hoping these numbers could automatically populate.13-14 budget-AG test.xlsm
I want to count the number of groups of 3 adjacent cells in a horizontal range (C5:EV5) in which any cell in the group of 3 has a value in it (as opposed to all the cells being blank or containing "0"). For example, if any or all of the cells in C5:E5 have a value in it, it would count as 1, and if any of the cells in the group F5:H5 have a value, it would also count as 1, and so on. Is there a way to use COUNTIF for this?
I have a spreadsheet where i would like to 'count' the number of cells with a particular colour AND SPECIFIC text (not 'any text').
I attach a xls with the initials of the person in column A, their colour as seen in cells in next four columns with the particular text in each cell. Therefore, for 'ABC1', in the given range, I would like to count how many cells have been allocated with the particular colour (brown, do not know colour index) and the particular text (1 or 2 or 4 or 5) in the range A1:CK39. Haven't supplied the actual sheet for confidentiality reasons.
I have a spreadsheet that lists all the work done by employees within a specific area. Some employees cover multiple areas.
I am now needing to work out the average work completed by each area. I need a formula that will count the number of employees by each work area.
I know this is something I have done before, but my mind has gone blank and I can't for the life of me work it out again (it's one of those days).
Row 3 of the spreadsheet contains the codes for the work areas they cover (CM, V & TC) and some employees only cover one (which would be a simple CountIf) but some have multiple.
What is the formula to, for example, count the number of people who have CM in row 3 even if they also have other entries in that cell.
I have a spreadsheet that contains given answers to a multiple choice test. I want to count the number of times each possible answer has been chosen at the bottom of the column. I have tried to use COUNTIF and that works fine to give me the number times each answer has been chosen but there is just one annoying thing. If the given answer hasn't been chosed by anyone, a "0" is automatically entered into the cell. This tends to really clutter up the spreadsheet and I would prefer for the cell to be left blank if the answer hasn't been chosen by anyone.
The closest I can come up with is: {=IF(D1:D10="","",COUNTIF(D1:D10,"A"))} but unless the answer "A" is chosed in D1, the cell remains blank.
If "A" is chosed in D1, then the formula works and counts all the rest of the cells that have "A" as an answer.
I have a spreadsheet which is linked to several other worksheets. I have managed to include formulas to count how many cells have numbers between 101 and 5000 by using this formula -
=sum((h2:h500>=101)*(h2:h500<=5000))
but now I want to count the number of cells in another worksheet that are equal to or less than zero. When I use the same formula as above it counts all the blank cells. I have tried using a countblank formula and then deducting this from the result, but unless the other worksheet is open the countblank formula does not work.
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Here is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.
I found these 2 examples online on how to count Mondays between 2 dates but neither seems to work on Excel 2003, which I am using. Can anyone help me please?
Number Of Mondays In Period
If you need to return the number of Mondays (or any other day) that occur within an interval between two dates, use the following Array Formula:
A2 contains the beginning date of the interval B2 contains the ending date of the interval C2 contains the day-of-week number (1=Sunday, 2=Monday,...,7=Saturday) ....
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
Column A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
I am trying to use a count if function for a specific word and a time range or number. so On Sheet 1 (called Raw Data) I want to check for the word annuity in Column H -
If it is present I want the formula to then check if the corresponding time in column C is within a specific hour.
how can I sum up all the "Type of Defect"[CR, LOF, DR] for a specific Welder. They were tag as Welder 1-7. In the attached example (Sheet1- Data), Welder 1 has 2 "CR" and 1 "LOF", this figures to be reflected in Sheet 2 (TOD).
Having a large spreadsheet with Columns A to F filled with data.
I'm trying to create a formula that's count the unique value "Order no." (Coloumn F) but only the ones between certain Departments Column(H) a certain "Error type" in Column(J).
If i want to remove the row that has value lower than 2 in a particular column (in this pic it's column L).
this column come from a =counta formula to count how many 'x' on each row.
[URL]
i paste few rows below. the column i am talking about is highlighted as 'count' My data goes really long below, thus it's not effective to use filter option.
