I have two excel sheets. The first sheet has a column with codes and another column with dates. There are more than one date for the same code. The second sheet has just one unique code. I would like to match the code on the second sheet with the code on the first sheet and return ALL the dates associated with that code to the second sheet - horizontally.
I have two series of dates – one daily series and the other is the hourly series – running in parallel. The daily series has the values which correspond to them – YES and NO columns which can be either 1 or 0. I need for each line on the hourly series to have the corresponding value of the YES and NO from the daily sheet. I am not sure how this can be done. I need this to be done by formulas only as this sheet only represents a condensed version of the larger workbook.
Is it possible to link an Excel Spreadsheet to an Access Data (formula) what I am trying to do for example:
In worksheet 1 cell A I have dates start from (01-Aug-06) and in cell B a amount (GBP 12,589.44)
In worksheet 2 cell A I have dates start from (Aug-06) and in cell B a exchange rate (1.4526) what I want in sheet 1 cell D formula (if A=AUG) find or mach the same from sheet 2 and get the rate * the B1)
I have been working on a macro and am trying to find an answer. To date I have not found what I am looking for so I thought I might ask for assistance.
I have 2 Worksheets that I am working with and I am trying to paste data from one to the other.
The Worksheet1 is my control sheet. The Worksheet2 contains data that I am trying to move to Worksheet1.
Worksheet1 has 3 columns:Ledger #, Balance 1 and Balance 2 Worksheet2 has 2 columns (not named), which are: Ledger # and Balance
I want to move the Balance on Worksheet2 to Worksheet1 and place the data in the Balance 2 column.
For example, the macro would start and look at the value in Worksheet2.A1 and match it against the value in Worksheet1.A5. If there was a match, then the value from Worksheet2.B1 would be pasted in Worksheet1.C5
I have attached a sample workbook.
My goal is to have Worksheet1 have the Ledger # with the 2 different balances (I will balance those 2 columns later).
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file: Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
see teh attached file, you can see on the file. Worksheet B of B62, I typed 15254", it col name "yarn count" and the product code you can see is Q921 at cell A62. Worksheet A, you can see F2 is Q921, col name is "product code". Now I just plugin a vlaue B62 ='15254' and I want it shows on worksheet A - G2 but remember it must match the product code of worksheetB - cellA62 'Q921' and worksheet A cell F2 'Q92' because next time user will plugin a number ie.1111 on B164; where product code of worksheet B - cell A164 must be match to worksheet A - cell F3, but it should show the value 1111 on cell G3.
I am wanting to do is have the values from a number of cells on sheet2 returned to sheet1. The catch for me is that I am using the validation command on sheet1. When I select an item in the validation field I want to return data that belongs with that selection. It may be best with an example....
On sheet2 I have a list of companies in Col.A, their street address in Col.B & their phone number in Col.C. On sheet1 I have a Validation field that lets me select from the list of companies... When a Company is selected I want to have the address data & phone numbers returned and placed in the cells beside the Validation box.
I have three columns (A to C) with contineous data (# rows always variable).
I would manually type a number in a cell (S2) that would correspond with a number in Column A. What I would like the code to do is that it finds the number in column A and selects the whole range in column B and C starting from that row, and copies that whole selection to N10.
After that all the data in column N should be substracted with a value given in S3 and all data in column O with a value given in S4.
I have a list of people with SSN, about 3000. This list contains business done by each individual, which can be in all 50 states. I have another list of the same individuals with just their name and addresses and what we call "client number". I need to put the client number with the list for the individual states. See example list:
List of individuals with client numbers
123 John Doe 456 Jane Doe
List of individuals with state business
John Doe AR John Doe CO John Doe FL John Doe MS John Doe TX Jane Doe MS Jane Doe TX Jane Doe AZ
I need for those client numbers to appear in the column before the names on list with states.
Example:
123 John Doe AR 123 John Doe CO 123 John Doe FL 456 Jane Doe MS 456 Jane Doe TX
I have two worksheets. The first one contains 500 rows:
Column A - Company Name Column J - Formula that calculates a 'company score' based on other data in columns B-H Column K - Number of directors
The second worksheet contains over 3000 rows:
Column A - Name Column B - Company Column C - Designation
I want to caculate a score for each person (from worksheet 2) that does the following:
Personal Score = ('Company Score' / No. of directors) * Designation Weighting
Where Designation Weighting (numerical value) is determined by Designation (text). There are 10 different and mutually exclusive types of text in the Designation column.
My problem is compounded by the fact that each person (in worksheet 2) can be directors on several companies. The Personal Score that I want to calculate needs to recognise which different companies they are directors of and sum the scores derived from each company.
I need is spread across various rows. In a separate sheet I want to be able to lookup two identifiers and pull the number needed in the adjacent row.
The first identifier is a 3 letter character, the second is CURREVO and I need the number to the right of CURREVO. My problem is CURREVO is not always in the same column, but in relation to the 3 letter character is always in the same row.
A B C D E F GDMGCURREVO52011.25YTDREVO243085.00DTYCURREVO11892.50YTDREVO59783.50ECUCURREVI1943.00YTDREVI 5,541.25CURFRQI4.00EEGCURREVO32864.75YTDREVO205426.75EICCURREVO658761.26YTDREVO3507022.68EILCURREVO335741.70YTDREVO1720830.72ENTCURREVI161242.39YTDREVI638681.84CVLCURREVO796266.21YTDREVO4816890.98ENDCURREVI34479.19YTDREVI44074.54EYECURREVI11880.12YTDREVI 108,007.02(Null)MICCURREVO1098694.15YTDREVO5766072.54NEUCURREVI25251.90YTDREVI 158,236.60CURREVO207.00
i.e. in a seperate sheet, I want to pull NEU, in that row I want to find CURREVO and bring back the adjacent number = 207.00
Basically what I am trying to do is use a Lookup formula on a sales invoice where the product name and product price will be automatically entered into the sales form when the product ID is entered. What would the formula be?
Product Information RegionProduct IDProduct NameProduct Price Product IDHPPHomeware Pizza Pan19.95 Product NameSPPStone Pizza Pan 29.95 Product PriceHCDHomeware Casserole Dish19.95 Units SoldHCPHomeware Cookie Pan 9.95 Total SaleCWChina Wok 19.95 HEWHomeware Electric Wok29.95 WCMWilson Coffee Machine29.95 HBMHomeware Bread Machine49.95 HBMDHomeware Bread Machine -Deluxe89.95 HRHomeware Rotisserie119.95 OGGOlson Gas Grill 159.95 OEGOlson Electric Grill 159.95
I have an excel sheet with cols of information e.g IDNo, FirstName,LastName etc. I have created a form in VB where you enter the IDNo (& Click on a command button called View) It should populate designated textboxes on the Form. Thus it should check the col where the IDNo is stored, find the IDNo and populate the adjacent cols i.e FirstName, LastName in designated textboxes on the form.
I have a list of dates in column AF. I would like to retrieve a value from the 2nd occurrence of a date, so I used the function for the Nth Occurrence on this website as follows:
Function Nth_Occurrence(range_look As Range, find_it As String, _ occurrence As Long, offset_row As Long, offset_col As Long) Dim lCount As Long Dim rFound As Range Set rFound = range_look.Cells(1, 1) For lCount = 1 To occurrence Set rFound = range_look. Find(find_it, rFound, xlValues, xlWhole) Next lCount Nth_Occurrence = rFound.Offset(offset_row, offset_col) End Function
The excel formula I am using is as follows: =Nth_Occurrence(AF2:AF622,AE2,2,0,1) Where AE2 is the date I am looking up. My question is this: When I put in a date ("1/12/2007") instead of AE2, i get the correct value. I tried giving AE2 and the AF column the same date formatting (3/14/2001), but this doesn't work. The date I am searching for also changes, so I cannot just type the date into the excel formula.
I'm trying to create a macro that can lookup values down a list, find that value within another list and copy the adjacent cells.
The values to look for will always be on the same column and the values to look into will always be in the same range or columns but not always in the same row.
For example.
AI:AI contains a list of ID's which will be manually input every day so they might have a different order.
C:AF has all the data to look into. C always being a list of ID values and I want for every ID found on AI:AI to be search for on C:C: and then once a match is found, I need specific adjancent cell values to be copied next to the ID found on AI.
The values that need to be returned are found on columns B,D,F,G,H,I,J,P,AF and they will always display on those columns.
I've been doing this based on vlookup and INDEX/MATCh formulas but I've come across some limitations for something I want to develop further so I'm trying to do this based on VBA.
Essentially, sheet b is a list of 900 people I need to mail to. Sheet a has 3000 rows of people, many of whom don't need the mailing. It has mailing addresses that we need in sheet b.
We have two worksheets, sheet a and sheet b
compare sheet b, column c (email addresses) to sheet a, column x, (email addresses). If they match, move sheet a, columns d, e, f, g, and h to sheet b.
I have a data table that contains begin dates, end dates, and colors. The data is input starting with the earliest begin date. On a second worksheet, I have a listing of the years starting with the year of the first begin date and ending with the end of this year. I need to be able to pull any color choices associated with a year from the data table on the first worksheet. Some years may not be specifically listed in the data sheet as the person could have had the same color choice for several years. Sometimes a person could have more than one color choice in a year.
I am at a loss for how to get to the data I need. I created an example spreadsheet to demonstrate the data I am working with, and an example of what I need my results to look like in the end.
b2,b3 Formula = Indirect(Address(match(a2,????,0),1,1,1,"Data"))
i dont know what is the correct range inside the match fuction to identiy the row number inside the Data sheet, i think the solution would be match(a2,Data!a2:a13,0) but things might get complicated if you have multiple worksheet such as sheet2: Data , sheet3: Data2, sheet3: Data 3
and each table has unsorted details compared to others sheets (Data vs Data 2)
I'm looking to create a macro that will take data from an input sheet, and paste it into a cell in another worksheet, based on criteria specified in sheet1.
Specifically in the attached example, the macro would copy the data in cells C8:C10 of sheet 1, then paste them into sheet 2 based on the data specified in cell B3 i.e. it would paste them into the column headed Mar-09. I intend to make this cell a drop down, so that the user can then select the next reporting month and run the macro again to paste the data into the Apr-09 column.
I have a spreadsheet which has a source worksheet, containing 2 columns with thousands of client numbers and account numbers. I have a destination worksheet which contains certain account numbers which are featured in the source sheet.
What I need to do is pull the matching client numbers across from the source sheet into the destination sheet. An example is attached.
I am trying to make things easier for the next user by having one command button run the macros for the other worksheets (so they don't have to switch between worksheet)
However, I get "Runtime error '1004' Application-defined or object-defined error"
I've created an excel workbook with multiple sheets. One of the sheets is the "Master Sheet" and I used the formula =INDIRECT("'Master Sheet'!A"&ROW(A2)) so that columns A and B on every sheet match exactly what I input into the A and B columns on the Master Sheet. I used this formula because it would allow me to insert rows on the Master Sheet and have that reflected in the other sheets.
However, I've realized that this means the data I am inputting on the other sheets gets misaligned because if I make a change on the Master Sheet it the A and B columns on the other sheets, but all the rest of the columns on the other sheets stay where they are. How to make the rows shift up and down together on the other sheets.
i will illustrate what i want to do here with these two excel sheets below. I want to some sort of coding that searches for A and B (Name of the Branch) from sheet 2 and copy the No. of transactions given against A & B from sheet 2 to sheet 1.
OR keep just A & B in sheet 2 and delete the rest of the rows so that i can manually copy and paste values against A & B.
I have worksheet 1 and worksheet 2. I have a different list of names in column A in both worksheets. Some of the names in worksheet 1 are in worksheet 2, but only a partial list. Worksheet 2 names are not in any kind of order and the rows do not match up with worksheet 1. In worksheet 1, column B is filled with each person's email address. In worksheet 2, column B NEEDS to be filled with each person's email address.
Is there a way for me to take each name, sequentially, on worksheet 2 and find that same name in worksheet 1, then pull the email address from column B (beside the name) and copy it to that cell in column B of worksheet 2?
I want to enter a value in a textbox, search for it in an worksheet, and populate other textboxes with adjacent values if the value is found. Anyway, the problem is that if the value is not found, I get a debug error.
I'm sure there's far better code to do what I need, but I tried to keep it simple. With the above code, it only works if the value is found. If it's not, I get an error. So how do I make it so that if the value is not found, the value of the textbox2 is "Not Found" or something...
I have 3 columns of data that are being copied from a .csv file. The data is pasted into Columns B, C, & D. Columns C and D are hidden. So that the user does not have to unhide the columns in order to delete the data, I would like to make it so that when the data in column B is deleted, the data in columns C and D is also deleted.
I have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top. The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F), Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That 1. puts the name of the sheet I am copying from in column A 2. the deadline date in Column B (that date is always in C10 of each worksheet) 3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet Dim DestSh As Worksheet 'worksheet in which to paste summary Dim Last As Long Dim CopyRow As Long 'row to copy Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1) End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
I am trying to use lookup function to lookup for data in another table (we call it table A). Unfortunately, whenever the code is not in the table A, Excel will return the data from the previous row.... is there any possible way to prevent this... in another word, if the code does not exist in the table A, I want Excel to return 0 or some other figures.
