On "SHEET1" loop through column "MODELCD" and perform a vlookup of its line items on column "NAME" in "SHEET2";. Once it finds a match on "SHEET2", copy the data in all 5 cells to the right of it and paste it back into "SHEET1" (in the cells to the right of the "MODELCD" line item being looked up).
"
I have attached a workbook below to help illustrate my task. What I'm trying to avoid is writing "10" separate Vlookups, when I could capture all the data in one procedure. I have been trying to figure this out for a couple of hours and decided to see if someone else knew how to do it. I have the idea in my head on how to do it, but struggle to translate it into working code.
Im open to using a FIND or SEARCH method instead of a VLOOKUP, but I was just more familiar with vlookups. This code i will be running on about 1000 line item, if that dictates one method vs the other.
I have two workbooks, one with two sheets and the other the new workbook where I want to copy the cell values. What I am trying to accomplish is:
1. From Workbook book1. sheet2. cellb (dynamic row values) I want to look for the value in book1.sheet1.cellb (static row values). If it is found I want to copy the cell values from book1.sheet2.cellb, celld, and celle to book2.sheet1.cellb, celld, and cellg. If there in a new value in book1.sheet2.cellb, I want to copy the same values (cellb, cellc, celld,celle) to book2.newrow.
I am attching the two workbooks with sample data, for clarification.
I have two sheets, one is "Summary" sheet and the other is "Sheet1". Both sheets has the same template. The "Summary" has color bordered cells and the "Sheet1" has no color. Whenever new color had been added to "Summary" sheet, I would like color from "Summary" sheet to be copied to "Sheet1" in same locations like if red been added to D12 cell in "Summary" sheet, D12 in "Sheet1" will automatically filled in red from "Summary" sheet. Similar to Lookup.
The sheet I have attached has three tabs one is a master sheet another is the production input and the last is an engineering input section, I have coded the production input section to input into cells and email the engineers when they have a new job, the issue i have is with the engineering input.
The engineers can currently go into this sheet and input the job number onto the engineering input section and it will show them the current issue from the master sheet (I have already entered 1002 in it), what I want them to be able to do is input into the white sections below the description and when they click on update entry a macro takes the job number entered into B3 and saves the information onto the mastersheet in the correct column/row which corresponds to the job they are updating.
However the engineers may need to go into the same job several times and update different information therefore the fields need to not paste into the cells if the input sections are blank.
I am trying to build a staff roster. The staff rotate over a 4 week cycle. the name of the staff member, and their shift needs to be looked up from the key then matched with the particular week. the name and shift then need to populate specific cells.
I have attached the worksheet so you can see what i am trying to achieve.
Running Excel 2007, I have attached an example of the spreadsheet I'm working on. The actual spreadsheet contains many more sheets and thousands of rows, with several more locations, but the concept is the same.
Challenge 1: I want to search Computer Name (column C) for names starting with AKL, WEL or WLG and then copy those rows to the NZ worksheet (leaving the original worksheet rows intact). Then for names starting with DEN, copy rows to the USA sheet. Then similar for other names...
I have been exhausting myself by experimenting with all sorts of nested INDEX, MATCH and VLOOKUP formulas, but I'm not up to the task and suspect a vb macro is the best or only way to do this..?
I found this post but I haven't been able to adapt it to work in my sheet... probably just my inexperience... http://www.excelforum.com/excel-prog...ell-value.html
Challenge 2: The next time the IT dept gives me an updated asset report, I will copy all the relevant data into this 'All Data' sheet, replacing the old data that was there - can the NZ and USA sheets dynamically adjust, or do I have to delete what's there to guarantee I won't accumulate old data? I guess I could use a blank 'template' file each time, if this is easier than building the function into vb...
Once the data is organised in this way, I intend to create a summary sheet that will show a count of assets in each location, probably with a stacked chart to pretty it up.
In Sheet2 l have a list of data (more complex than the sample but l expect the answer will be the same)
I would like to enter a name (ie Rob) from column A into Sheet1 and have excel copy all of the lines with the name "Rob" into the new worksheet
I think l know how to use a lookup to copy one line but dont know how to copy multiple lines with the same lookup ie Rob
******** ******************** ************************************************************************>Microsoft Excel - Broomhayes Sick.xls___Running: xl2000 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutE8E9E10E11E12E13E14= ABCDE7NameDate££Tot8Claire22/05/2007146181649Rob15/06/200718557310Claire04/06/2007119610711Sue14/04/200717345112Jane12/03/2007587813613Rob14/06/200739145314Sue28/05/20076936105Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I'm having a hard time understanding the Find function and getting the syntax correct. For the example below I need an entire function that will look up the most previous value of 'Incident_Number, and copy the corresponding 'Description' into the last record.
My spreadsheet has an Excel Table with column A titled 'Incident_Number' (a Number) and column B is 'Description' (a String). Incident_Number may contain cells with duplicate entries, but in each case, there will be a corresponding 'Description'. I already have a macro that creates a new record for either 1) a New Incident, or 2) an existing Incident. If I'm creating a new record for an existing Incident, what I need to be able to do is auto populate 'Description' with the value in the previous record that has the same Incident_Number.
In the example, the macro should copy "The battery was replaced" from the most previous record whose incident number is 1001 into the new record.
Incident_Number Description 1001 The battery is dead 1002 No power at the console 1003 System crashed 1001 The battery was replaced 1004 something else 1001 ?? (should read, "The Battery was replaced"
It works great (a tip I got from this site Now, I would like to take the LOOKUP portion & use it in a macro.
What I want to accomplish is to have the macro look at the prior month's data, scroll to the last entry in a column then LOOKUP to get the 1st numeric it finds and copy it to another spreadsheet. I need it to bypass any text it finds, and only accept a numeric for calculation.
I have three columns (A to C) with contineous data (# rows always variable).
I would manually type a number in a cell (S2) that would correspond with a number in Column A. What I would like the code to do is that it finds the number in column A and selects the whole range in column B and C starting from that row, and copies that whole selection to N10.
After that all the data in column N should be substracted with a value given in S3 and all data in column O with a value given in S4.
I have a workbook with 12 sheets. On the 12th sheet I need some VB to go to each of the other tabs and find the letter “E” or “H” in column F. Once the “E” or “H” is found in column F and a number =>9 is found in column E then copy that row from column A-F and paste this row to sheet 12. On sheet 12, I would like to be able to paste the row in a way that will hold the date in column A. The date can also be copied from each sheet found in cell E1. Also, the tab name has to be copied to sheet 12 with the row the E or H was found if “=>9 criteria” was met.
I have a standard template worksheet called "Input" (the workbooks name is "Input Capture") which spans C12:U1100.
In addition I have a seperate worksheet which is based in an all entirely seperate workbook called "People Data" (the workbooks name is "Succession Planning") which again spans C12:U1100.
What I would ideally like is a macro which matches the value in column C and populates the entire row (much in the same way as a HLOOKUP, only pasting values) with the exception of columns M and Q.
I have attached a file with an example of what I need. The data tab show the data has been given to me. I need it in a different format to be able to load it into our system. The Needs tab shows what format I need. Basically, I need to convert this table into a flat file, where there is a record for each "X" value only.
I cannot determine why I am getting an N/A error in Cells I11:L11. The formula is copied and consistent throughout the sheet. The Table referenced in the formula appears to be fine. I just cannot figure this out.
1. Start w/ "RULE-Table" sheet, 2. Take note of "TODAY" date, 3. LOOKUP date in "RULE-table" 4. Locate Coordinates found in Col D of RULE-Table, 5. LOOKUP the data that resides in those Coordinates on the "PRODUCTION" sheet & COPY 6. PASTE data into "REPORT" tab C2 and E2.
Here's an example to visualize:
Code will do everything it needs to do within an Undisclosed OPEN file with several sheets. The reason the Workbook file name is undisclosed/undefined is because the file name will vary based on clients, so I don't want the code to be limited to look for a specific filename.
*The sheet names within this OPEN client file will always have the same names.
The sheet called: "RULE-Table" holds coordinates based upon "TODAY's" computer date. For example: If today is JAN 4, the desired coordinates to pull data from are "B5" and "D10" from the "PRODUCTION" sheet.
Since today is 1/4, its rules say go to B2 and D10 of the PRODUCTION tab and collect the data
"PRODUCTION" (data source) sheet (within the same open file) A.......B......C....D....E....F... Row1..Header..Hdr..Hdr..Hdr..Hdr. 2.......2................................. 3.......14............................... 4.......13............................... 5.......20............................... 6.......62.............................. 7....................76................. 8...................184................ 9...................375................ 10.................410................ 11.................525...............
Last, the collected data from those 2 coordinates should always get pasted onto the "REPORT" tab into C2 and E2 in this example.
"REPORT" (destination) sheet (within the same open file) A........B.........C.....D....E..... Row1..Header..Hdr..Hdr..Hdr.. 2...................20........410......
I'm trying to create a macro that can lookup values down a list, find that value within another list and copy the adjacent cells.
The values to look for will always be on the same column and the values to look into will always be in the same range or columns but not always in the same row.
For example.
AI:AI contains a list of ID's which will be manually input every day so they might have a different order.
C:AF has all the data to look into. C always being a list of ID values and I want for every ID found on AI:AI to be search for on C:C: and then once a match is found, I need specific adjancent cell values to be copied next to the ID found on AI.
The values that need to be returned are found on columns B,D,F,G,H,I,J,P,AF and they will always display on those columns.
I've been doing this based on vlookup and INDEX/MATCh formulas but I've come across some limitations for something I want to develop further so I'm trying to do this based on VBA.
I need to determine the shipping price of, say, a fruit based on its weight. I'd like to do this by looking at a matrix that lists fruit type (column E), weight range (column F/G), and resulting shipping price.
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
I would like to lookup and return results based on the values of two cells A1 and B1.
The returned results are from column G to column I and always returned in the same location of the spread sheet.
For example if P2560 is selected in A1 and D10 in cell B1 then after lookup the results would be the values of G3 to I4. Alternatively if A1 is P2560 and B1 is D20, then the results are the values of E5 to I7 and so on.
see the attached spreadsheet for more details. This shows the main data (A2 to I15) and the expected results depending what value is selected for cells A1 and B1.
I have 40 or so case studies on one worksheet. Each case has four columns- the first is the year, and the next three are values for that year. Each study is 140 years long, but they don't all start in the same year. What I want to do is pluck all the values from the fourth column of each study, and total them up for each year.
I have one sheet that is used to check off when certain questions are answered for an inspection of departments in a building. As the first image shows, Row 1 contains the questions; Column A contains the departments. I simplified this for the image, but the rows represent individual audits, over time, so a department will appear again and again on subsequent rows, as new audits are conducted. When it's time to do a new audit, the user starts a new row and selects the department in Column A from a drop down list (via data validation).
What I need to happen is when the user selects a department, certain cells under each question are filled with black, indicating that the question does not apply to that department.
I have used this handy formula =INDEX(MID(SheetNames,FIND("]",SheetNames)+1,255),ROWS(A$1:A2))
to create an index page that looks like this right now:
Index 35035-9 37032-14 37065-6 37079-4
Now what I would like to do is get cell B1 on each of these sheets to post in the next column without hardcoding the name of the sheet into the formula. So in the cell next to 35035-9, I would like the formula to look at worksheet name, and then go to that worksheet, and return cell B1. Same for all the other worksheet names.
There will be multiple additions of worksheet to this list over the course of the next year and I want to be able to index them easily.
In column b I have a list of items by number, each one is unique In column c I have a list of items by number. In this column a item may not be listed or listed 1000's of times. In column d I have a list dates for each of the items listed in column c In column e I have a list of prices for each of the items listed in in column c
The idea with the orginal formula was to look up the item and return the date
=MAX(INDEX(($C$2:$C$39999=B2)*(D$2:D$39999), 0))
Now I need to get it to return the most recent date from column d and the dollar amount right next to it from column e. How would I do that?
I trying to return the most recent date and price for a item.
I thought about breaking this into two formulas and having the second formula read the date that was returned from the above formula and the item number from column b and returning the value from e, but got stuck. I was thinking a lookup function with two criteria.
