Such that the hour is in the first column and the values for each date is in individual columns. How can I populate the table easily using formula? For the first date column I can just reference the first 24 cells. But how can I create a formula for the second date that I can use to copy over for the third date, the fourth date, and so on? So for 8/13/2009 0:00 I can put into the cell =C2 For 8/14/2009 0:00 I want to put something in that automatically advances 24 cells down the value column and that I can copy and paste into the remaining date columns of the second table to populate it automatically. It seems like this should be easy but I can't figure it out.
sheet 1 contains student data, name dob, actual age, raw score and an empty column standardized score
sheet 2 contains a conversion table, using the actual age from sheet one you locate the age in the top row of table in sheet 2, and using the raw score from sheet 1 you locate the matching raw score from the first column of the table in sheet 2, going down and acrosss until you meet this gives you a standardised score
i want the standardized column in sheet one to fill by using a formula which looks at the table in sheet two locates the two values and returns the result.
The # of days column will be a manual input. Then I have a larger table that will take those values and convert them to look like this: (Obviously the dollar values are pulled from somewhere else)
1 DTX $ 1,292.00
2 DTX $ 1,292.00
3 DTX $ 1,292.00
[code]....
I've been thinking of trying to use a macro but not sure that is the best way. Using a button or something doesn't seem very elegant either.
In Table A, I have the rate table for an insurance product. I need to build a formula that will outomatically populate the data in Table B based on plan, start age and deductibles.
Example, if a person selects age 32 years, deductibles as 0 and plan 4, then his yearly premium will be $750/12=$62.50.This will automatically increase when his age falls into the next age bracket which is 36-45 years and his premium at age 36 to 45 will be $970/12=$80.83.
The Table B should populate all this information from the start age to age 80 when the policy stops. An example of table B is shown in the attachement for someone who starts at age 32, chooses deductibles as 0 and plan 4.
I'm trying to take list off a sheet called List ( attached pic ) and populate the table on a sheet called I-O List, there is already a formula to get the Module type and calulate the data, on the list it shows how many Inputs and Outputs it has so I need it to look like the final pic I attached, it will basically say if inputs = 16 it will start at 0 and go up. I just don't know how to populate a table, and count up from 0. and the last objective is theres a column called X if the cell is empty I don't want to calculate the line on the list, if it = X then I do.
Here's my situation. I dump entire project cost information from Oracle every two weeks and am trying to use it to automatically populate a cashflow report. I need to tell my cashflow sheet to look at the "Oracle Data" sheet and sum the numbers in "F" for all of the rows that have a certain area (Cashflow "E6"), dept (Cashflow "A36") and occur on the date in row 9 of the current column and the two week period prior. (For instance, my week ending is 12/20/08 so I need it to pull everything that has a date of 12/7/08-12/20/08.
I think I need a Sumif, but this is so convoluted to me that I can't begin to figure out how to tell it to do this.
I have a pretty vast database which I populated through VBA from a certain number of worksheets. I now need to create a table which shows min, max and average for each location given x, y or z condition. So far I only approached it by creating a secondary table with each range address and then using INDIRECT, but this would require extra work on the database (insert a function to sort out locations alphabetically and within each Range.Location sort out by conditions (note. A, B and C are not in alphabetic order)) and is also very ugly.
i'm trying to populate a sheet with 7 tasks (blue colored) for 22 Employees
by this rules: task 1 for 1 person task 2 for 2 person task 3 for 5 person task 4 for 2 person task 5 for 7 person task 6 for 1 person task 7 for 4 person
doing this by hand it's time consumer so i'm looking for an automatic solution.
I have my projection formulas that use the date and age to estimate production on each farm. Basically the age is calculated first and then the production rate is estimated. I have been trying to figure out if, instead of having a formula in each cell, can I use VBA to populate the ages and then the production.
Here is an example:
8/22/2009
FarmAge8/22/09Age8/29/09Age9/5/09Age9/12/09Age9/19/09Age9/26/09Age10/3/09Farm 1 34181351813617937179381793917940177Farm 2 39223402204122042220432204422045218 All the functions I have created work, I just can't have the worksheet auto-calculate due to the total number of cells with functions. Calculating the worksheet takes approx 1 min...
I should be able to adjust any code to the ranges needed, but this example shows the basic layout.
I have a userform to be populated with data from a dynamic table for purposes of showing users their daily stats. The data is populated on the worksheet in the following way- ..............
When the userform is pulled up, it needs to show the following details -
UserName - User1 Workitem 2 : 12 Workitem 3 : 7
As the work items go all the way to 65, I wanted to only show the work items that had actually been worked on by each person - What I am struggling with is how to populate the textboxes on the userform with this data - without getting into an absolute mess of if statements -
If Range(WorkItem1Range).Value <> "" Then userformStats.WorkItemA= Range("a2").Value..........
From the excel spread sheet, while selecting from the drop down list (Deployment Model) from attached Workout sheet, the corresponding table should be highlighted from given tables and populate the same table in the Recommendation sheet from the same excel.
I am attaching sample sheet for your reference and easy understanding about the requirment.
Activities to be carried out:
Go to Workout (Sheet) --- > Select from drop down list (C2) -- > Based on Projection Volumes, list ----> It should highlight the corresponding table from below --> Pick up that particular table and Populate the same in Recommendation sheet (with out formulas, only values should come in tabular format)
I run a web query to populate a table in my spreadsheet. The data is dynamic - and on some days, I will get a couple of extra rows in the table (its weather data, so e.g. when its raining, they will forecast an extra row of how many mm, etc...)
To give a simple example, right now I use Hlookup to locate the value of F3 (the date) in my dynamic range of B26:G26 and step down 3 rows, where my needed temperature values are for that corresponding day. This works great like this already: =HLOOKUP(F3,B26:G29,3,FALSE)
The big issue is...what happens if my target values are not always 3 rows down? If the query refreshes with any extra rows, this reference is shifted. (Well, my starting "Anchor" is shifted)
I have two tables on two different worksheets. I would like to automatically populate a distinct list into column A in table 2 from the data in column A in table 1.
Table 2 must auto populate from table 2 every time a new row is added into table 1 - without any extra user interaction e.g. pressing a button etc. No offense intended to my better half but if she has to do anything more than enter a new row in table 1 she'll likely manage to screw it up after a week
I kind of managed to get it working using the below formula but both sets of data must be in tables so I can't copy the formula down the column without creating redundant table rows.
I've been trying to get a table to populate based on a couple of criteria. However, I've not come-up with the solution yet.
I have my dropdown selections in cells C2 & C3. The objective is to populate the table below the dropdown with data from the sheet named (very unimaginatively) 'Data'. Currently you see the selection AA-11 & Mar-14 in the Contract ID & Month cells. If I change this, the table below should auto-populate.
I've attempted using Vlookup, Index-Match. But it does not give me the desired result.
Also, the number of Products can change each month (although the file shows 4 for each month & each Account).
I have a column (A) with names, Column (B) with platoon numbers. On another sheet I have a table for each platoon and I want it to be populated with the names of each platoon indevidually. The names are alphabetically and the platoon numbers are mixed.
Column A Column B Name Platoon J Goodman 1 L Barns 7 H Law 1 B Aims 10
and so on....
I want all the names from platoon 1 to appear in the table for platoon 1. I have about 3000 members and 40 platoons.
Working on data presentation. I have a log that is populated from elsewhere in the workbook. I would like to be able to have a table update itself as the log changes. In the table I need to capture each unique name and all dates associated with the name. I have a sample attached of what I hoped it would look like when working. Basically I have a place for the name and to the right, cells that represent the months of the year. The data captured has the date in mm/dd/yyyy format and I just need each monthly instance to land in the proper month column in the table. No need for date specific, just the month of the occurrence.
I want to write down the code that will populate values in "Sheet1" from the Access table. The column headers shows "Envelope types", "Envelope Size" fields from the Access table and each cell should store sum(volume) for each month in the table.
As I can't upload access table in the attachment so I have exported data into Workbook named "tblmain" as attached. But in actual tblmain is Access table. consider it an access table.
wrting code that will fetch data from access table and store in all the cells of the table in "Sheet1" of Elevate workbook.
I am trying to populate a table (a7:c27) in the attached sheet with data.
First, I must enter a number 1-16, which uses index function to return either "series" or "base"
If it is base, i want the number in the corresponding table filtered down - i.e. if 1 originally picked then h7 is (40) is entered into each month as base = constant.
If the result is series, then the data in i7:z7 is entered into the the 18 month table.
I am using excel 2007. My issue is i have a front sheet that I want to list all my tasks due within five days of the day of the month the spreadhseet is opened.
All the tasks are on two different excel sheets though and one of them i update with different tasks 2-3 times a week.
I want to set up a table that automatically adds rows, ideally to the top... The way I was guessing to do it would be to alter rows in the table to have a variable... My variable is 'acctstotal' anyway I figured there would be a way to edit the rows to acctstotal+ 1 or somthing along those lines but I havent been able to figure it out
btw acctstotal is a variable that simply counts the number of nonblank lines that are in the first column of the table which tells me the total number of accounts
I am building a table for a group of vlookups, and I have a bunch of variables that need to be defined. I need to identify each and every possible combination of about seven different terms.
E.g. this simple table:
A B C 1 red1 org1 yel1 2 red2 org2 yel2 leads to this list:
red1org1yel1 red2org2yel2 red1org2yel1 red2org1yel1 red1org2yel2 ... etc. This model is almost exactly what I am starting with, except there will be six or seven columns, depending. Also, no two variables within a given column will mix with one another, e.g. no "red1red2yel1" etc.
Rather than do this by hand, I thought there must be a programmatic solution (or even a little formula).
I am currently in the process of creating a league table using Excel, and was wondering how I could get the teams to automatically arrange themselves in order of total points?, without using macros, is any formula capable of this?
I'm having a bit of a block with an index/match formula that I am trying to create for the attached spreadsheet. i.e. I need to populate cell J3 with the info the corresponding letter contained in the table to the far left. The numbers of reference to match are the 'zones' in H3 and J2.
Please see attached the Workbook. I need to check the policy Numbers in Column A to be present in Access Table. If yes then write the corresponding ScanDate and BatchNo in columns I and J.
I use a macro that automatically generates a pivot table, re-formats the data, and then makes sure there are no blanks and that the DATA area of the pivot table is set to SUM OF and not COUNT OF.
It was working just fine yesterday but today it is giving me the following error and is highlighting this section of my
I've posted an example workbook that has sheet1 as how the data comes and sheet2 as what I need it to look like (through some kind of automatic process). I really don't have a clue as to how to get this done, and I'm guessing some VBA is going to be required.
