I want to enter data in a table from an expense log. I am looking for a formula to put in the Data Sheet to do this.
Sheet ‘Log’
Range A3:K50
Column B = Account #
Column D = Date (day/month/year)
Column F = Dollar Amount
Sheet ‘Data”
Column B = Date (day/month/year)
Row 2 = Account #
I have tried various formulas (lookups and index/match) but have had no success.
I have a workbook with two worksheets,
sheet 1 contains student data, name dob, actual age, raw score and an empty column standardized score
sheet 2 contains a conversion table, using the actual age from sheet one you locate the age in the top row of table in sheet 2, and using the raw score from sheet 1 you locate the matching raw score from the first column of the table in sheet 2, going down and acrosss until you meet this gives you a standardised score
i want the standardized column in sheet one to fill by using a formula which looks at the table in sheet two locates the two values and returns the result.
I have a table below that looks like this:
LOC
# of days
DTX
3
RTC
3
PHP
12
IOP
12
The # of days column will be a manual input. Then I have a larger table that will take those values and convert them to look like this: (Obviously the dollar values are pulled from somewhere else)
1
DTX
$ 1,292.00
2
DTX
$ 1,292.00
3
DTX
$ 1,292.00
[code]....
I've been thinking of trying to use a macro but not sure that is the best way. Using a button or something doesn't seem very elegant either.
I have data that was taken hourly for a whole year. It is in three columns as shown below:
Date Time Value
8/13/2009 0:00 0.6
8/13/2009 1:00 1.2
8/13/2009 2:00 1.4
. . .
. . .
8/13/2009 23:00 0.8
8/14/2009 0:00 0.7
8/14/2009 1:00 1.5
. . .
. . .
What I want to do it is put the data in a table as shown below:
Hour 8/13/2009 8/14/2009
0:00 0.6 0.7
1:00 1.2 1.5
Such that the hour is in the first column and the values for each date is in individual columns. How can I populate the table easily using formula? For the first date column I can just reference the first 24 cells. But how can I create a formula for the second date that I can use to copy over for the third date, the fourth date, and so on? So for 8/13/2009 0:00 I can put into the cell =C2 For 8/14/2009 0:00 I want to put something in that automatically advances 24 cells down the value column and that I can copy and paste into the remaining date columns of the second table to populate it automatically. It seems like this should be easy but I can't figure it out.
In Table A, I have the rate table for an insurance product. I need to build a formula that will outomatically populate the data in Table B based on plan, start age and deductibles.
Example, if a person selects age 32 years, deductibles as 0 and plan 4, then his yearly premium will be $750/12=$62.50.This will automatically increase when his age falls into the next age bracket which is 36-45 years and his premium at age 36 to 45 will be $970/12=$80.83.
The Table B should populate all this information from the start age to age 80 when the policy stops. An example of table B is shown in the attachement for someone who starts at age 32, chooses deductibles as 0 and plan 4.
I'm trying to take list off a sheet called List ( attached pic ) and populate the table on a sheet called I-O List, there is already a formula to get the Module type and calulate the data, on the list it shows how many Inputs and Outputs it has so I need it to look like the final pic I attached, it will basically say if inputs = 16 it will start at 0 and go up. I just don't know how to populate a table, and count up from 0. and the last objective is theres a column called X if the cell is empty I don't want to calculate the line on the list, if it = X then I do.
View 9 Replies View RelatedHere's my situation. I dump entire project cost information from Oracle every two weeks and am trying to use it to automatically populate a cashflow report. I need to tell my cashflow sheet to look at the "Oracle Data" sheet and sum the numbers in "F" for all of the rows that have a certain area (Cashflow "E6"), dept (Cashflow "A36") and occur on the date in row 9 of the current column and the two week period prior. (For instance, my week ending is 12/20/08 so I need it to pull everything that has a date of 12/7/08-12/20/08.
I think I need a Sumif, but this is so convoluted to me that I can't begin to figure out how to tell it to do this.
I have a pretty vast database which I populated through VBA from a certain number of worksheets. I now need to create a table which shows min, max and average for each location given x, y or z condition. So far I only approached it by creating a secondary table with each range address and then using INDIRECT, but this would require extra work on the database (insert a function to sort out locations alphabetically and within each Range.Location sort out by conditions (note. A, B and C are not in alphabetic order)) and is also very ugly.
View 3 Replies View Relatedi'm trying to populate a sheet with 7 tasks (blue colored) for 22 Employees
by this rules:
task 1 for 1 person
task 2 for 2 person
task 3 for 5 person
task 4 for 2 person
task 5 for 7 person
task 6 for 1 person
task 7 for 4 person
doing this by hand it's time consumer so i'm looking for an automatic solution.
i used excel 2007
I have my projection formulas that use the date and age to estimate production on each farm. Basically the age is calculated first and then the production rate is estimated. I have been trying to figure out if, instead of having a formula in each cell, can I use VBA to populate the ages and then the production.
Here is an example:
8/22/2009
FarmAge8/22/09Age8/29/09Age9/5/09Age9/12/09Age9/19/09Age9/26/09Age10/3/09Farm 1
34181351813617937179381793917940177Farm 2
39223402204122042220432204422045218
All the functions I have created work, I just can't have the worksheet auto-calculate due to the total number of cells with functions. Calculating the worksheet takes approx 1 min...
I should be able to adjust any code to the ranges needed, but this example shows the basic layout.
I have a userform to be populated with data from a dynamic table for purposes of showing users their daily stats. The data is populated on the worksheet in the following way- ..............
When the userform is pulled up, it needs to show the following details -
UserName - User1
Workitem 2 : 12
Workitem 3 : 7
As the work items go all the way to 65, I wanted to only show the work items that had actually been worked on by each person - What I am struggling with is how to populate the textboxes on the userform with this data - without getting into an absolute mess of if statements -
If Range(WorkItem1Range).Value <> "" Then
userformStats.WorkItemA= Range("a2").Value..........
From the excel spread sheet, while selecting from the drop down list (Deployment Model) from attached Workout sheet, the corresponding table should be highlighted from given tables and populate the same table in the Recommendation sheet from the same excel.
I am attaching sample sheet for your reference and easy understanding about the requirment.
Activities to be carried out:
Go to Workout (Sheet) --- > Select from drop down list (C2) -- > Based on Projection Volumes, list ----> It should highlight the corresponding table from below --> Pick up that particular table and Populate the same in Recommendation sheet (with out formulas, only values should come in tabular format)
I run a web query to populate a table in my spreadsheet. The data is dynamic - and on some days, I will get a couple of extra rows in the table (its weather data, so e.g. when its raining, they will forecast an extra row of how many mm, etc...)
To give a simple example, right now I use Hlookup to locate the value of F3 (the date) in my dynamic range of B26:G26 and step down 3 rows, where my needed temperature values are for that corresponding day. This works great like this already: =HLOOKUP(F3,B26:G29,3,FALSE)
The big issue is...what happens if my target values are not always 3 rows down? If the query refreshes with any extra rows, this reference is shifted. (Well, my starting "Anchor" is shifted)
I have two tables on two different worksheets. I would like to automatically populate a distinct list into column A in table 2 from the data in column A in table 1.
Table 2 must auto populate from table 2 every time a new row is added into table 1 - without any extra user interaction e.g. pressing a button etc. No offense intended to my better half but if she has to do anything more than enter a new row in table 1 she'll likely manage to screw it up after a week
I kind of managed to get it working using the below formula but both sets of data must be in tables so I can't copy the formula down the column without creating redundant table rows.
=INDEX(Classes!$A$2:$A$999, MATCH(0, COUNTIF($A$1:A1, Classes!$A$2:$A$9), 0))
Example
Sheet 1 = "Classes"
Column A = "Student Names"
John
Mike
Paul
Andrew
Paul
Paul
Mike
Sheet 2 = "Total Due"
Column A = "Student Names"
Paul
Mike
I've been trying to get a table to populate based on a couple of criteria. However, I've not come-up with the solution yet.
I have my dropdown selections in cells C2 & C3. The objective is to populate the table below the dropdown with data from the sheet named (very unimaginatively) 'Data'. Currently you see the selection AA-11 & Mar-14 in the Contract ID & Month cells. If I change this, the table below should auto-populate.
I've attempted using Vlookup, Index-Match. But it does not give me the desired result.
Also, the number of Products can change each month (although the file shows 4 for each month & each Account).
I have a column (A) with names, Column (B) with platoon numbers. On another sheet I have a table for each platoon and I want it to be populated with the names of each platoon indevidually. The names are alphabetically and the platoon numbers are mixed.
Column A Column B
Name Platoon
J Goodman 1
L Barns 7
H Law 1
B Aims 10
and so on....
I want all the names from platoon 1 to appear in the table for platoon 1. I have about 3000 members and 40 platoons.
Working on data presentation. I have a log that is populated from elsewhere in the workbook. I would like to be able to have a table update itself as the log changes. In the table I need to capture each unique name and all dates associated with the name. I have a sample attached of what I hoped it would look like when working. Basically I have a place for the name and to the right, cells that represent the months of the year. The data captured has the date in mm/dd/yyyy format and I just need each monthly instance to land in the proper month column in the table. No need for date specific, just the month of the occurrence.
View 2 Replies View RelatedI want to write down the code that will populate values in "Sheet1" from the Access table. The column headers shows "Envelope types", "Envelope Size" fields from the Access table and each cell should store sum(volume) for each month in the table.
As I can't upload access table in the attachment so I have exported data into Workbook named "tblmain" as attached. But in actual tblmain is Access table. consider it an access table.
wrting code that will fetch data from access table and store in all the cells of the table in "Sheet1" of Elevate workbook.
Macro to extract data from cells and populate them into a table. Go to the links below for the images. Why I can't attach images here.
HTML Code: [URL]....
I am trying to populate a table (a7:c27) in the attached sheet with data.
First, I must enter a number 1-16, which uses index function to return either "series" or "base"
If it is base, i want the number in the corresponding table filtered down - i.e. if 1 originally picked then h7 is (40) is entered into each month as base = constant.
If the result is series, then the data in i7:z7 is entered into the the 18 month table.
I am trying to sort a table of data by "Status" and automatically populate another Sheet. In Sheet 1, I have data as follows:
Issue Status Issue - 1 Open Issue - 2 Closed Issue - 3 Closed Issue - 4 Open Issue - 5 Closed Issue - 6 Open
I want Sheet 2 to automatically sort this information by Status = "Open".
Issue Status Issue - 1 Open Issue - 4 Open Issue - 6 Open
How I can accomplish this by Excel functions (I do not want to use Pivot table)?
I am using excel 2007. My issue is i have a front sheet that I want to list all my tasks due within five days of the day of the month the spreadhseet is opened.
All the tasks are on two different excel sheets though and one of them i update with different tasks 2-3 times a week.
I'm having a bit of a block with an index/match formula that I am trying to create for the attached spreadsheet. i.e. I need to populate cell J3 with the info the corresponding letter contained in the table to the far left. The numbers of reference to match are the 'zones' in H3 and J2.
View 2 Replies View RelatedPlease see attached the Workbook. I need to check the policy Numbers in Column A to be present in Access Table. If yes then write the corresponding ScanDate and BatchNo in columns I and J.
Sun Project.xls‎
i have two fields with dates - one field A1 for date authorised (for a data request) and one field B1 for date actioned (data request)
i need a formula to populate in C1 the following:
if A1 is blank then C1 is 'not actioned'
if B1 is blank then C1 is 'not complete'
if both contain dates then C1 to calculate the number of working days between the dates eg. A1 10.08.09, B1 11.08.09...C1 = 1 working day
I have created a table in Excel 2010 (pls see attached table named post.xlsx).
Then copied the above table into PowerPoint 2010, using "paste link" (I tried to attach the PowerPoint file but the system says "invalid file type" and I cannot attach it).
Question:
I have received income data for another month - the new month is 13 and the corresponding new income is 100.
I typed 13 and 100 into the Excel table post.xlsx and thus extended the table by another column.
Then I went back to PowerPoint slide, then right clicked on the table there, then clicked "update link".
Specific Question:
The newly-typed column in Excel table is not get updated in PowerPoint table.
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest)
The problem is i will get "....A file name already exist...do you want to overwrite.." prompt.
Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that is either specific to this worksheet or in a macro. When the sheet is opened I enter a date in B2. I then enter data into A7, B7, and C7. What I would like to happen is when the data is entered into A7, B7, and C7 the sheet goes and finds the same date that I entered in B2 and copies that data from A7, B7, and C7 into F7, G7, and H7.
View 2 Replies View RelatedI would like to have a macro to automatically generate a statistics table (on the "statistics" tab) with the 5 following fields:
Fragment names / # samples / # of failed samples / % of success / # of variations in the fragment (SNP). At the bottom of this table, I would like to have a cell with the average % of success for all fragments. The data to generate these statistics are on the "gene name" tab (please note that this name will change every time I will work on a new gene). To make things easier, I think the macro should be run from this tab.
1. The Fragment names are displayed in row #5. I use one column per variation per fragment. If one fragment has 3 variations, there will be three columns and I will merge together the fragment name cells. The fact that some cells are merged can be a problem when copy-paste to the stats table (as I would like to get rid of the merging).
2. # of samples corresponds to the number of cells in blue in column A. The number of samples can change from one report to another but is always constant in the same report.
3. # of failed sequences. In the table, I type "Failed Sequence" (if the analysis has failed) and "Missing Sequence" (if the analysis has not been done). When a sample is failed or missing, it is for the who fragment, no matter how many variation there is in the fragment, so I usually merge the cells of all variations for this failed sample.
4. % of success: this is quite easy #sample/#of failed+missing sequence for this fragment
5. # of variation is equal to the number of variations for this fragment (can be 0, 1, 2, etc.). When there is no variation in a fragment, I put '-- in all cells of the corresponding fragment on the "gene name" tab. Fragment 3 on my file is an example of 0 variation.
I have a very large excel data file, which I want to analyse using pivot tables. The problem is that while most of the columns are headed with the variable name (e.g. country) and have the list of variables displayed under that heading for each observation (e.g. Italy), the years are spread across the columns - i.e. the heading for column X is not "Year", but is 2003, with the next column being 2004, etc.
Is there a quick way I can re-arrange the data so that the layout is consistent and so that I can use it for pivot tables? I have way too many observations to do this by hand.