I have a table that has multiple products and price points in it and I would like to add a field that ranks the products by price but for only against that product.
Product Price
Result needed is the Rank only by product based on Price
A
150
2
A
155
3
B
130
1
[Code] ........
I've got 3 columns of info.. Name, Org, #Sales, $$..
I need to rank the list by:
Org, $$, #of Sales (as the tie breaker)
So, I need it to look for a specific Org Dept in Column B, rank the Dollar Amounts in column C, and if there are any ties, go to #Sales in column D and use the biggest number there to break the tie.
I've found 2 formulas..
This one was awesome for looking for the specifc Org Dept and only ranking those numbers that matched the designated Org Dept. (but this can't break any ties)..
IF(ISERROR(MATCH($O3,LARGE(IF($P$3:$P$53=R$2,$O$3:$O$53),ROW(INDIRECT("1:"&COUNTIF($P$3:$P$53,R$2)))),0)),"",MATCH($O3,LARGE(IF($P$3:$P$53=R$2,$O$3:$O$53),ROW(INDIRECT("1:"&COUNTIF($P$3:$P$53,R$2)))),0))
Then there's this one that broke ties, but can't recognize a specific Org Dept that I need..
=RANK($O3,$O$3:$O$53)+SUMPRODUCT(($O$3:$O$53=$O3)*($F$3:$F$53>$F3))
I would like to change the ranking between two rows based on some criteria with macro.
View 6 Replies View RelatedFormulas for ranking by column "PTS" and then by "DIF" if the PTS are equal for two or more teams...
View 5 Replies View RelatedI have attached an example worksheet of something that I am working on. My references refer to this sheet.
Column Descriptions:
B = agents.
C = the agent's supervisor.
D = the agent's score.
E = the agent's overall rank in comparison to all other agents.
*F = the agent's rank in comparison to the other agents on the supervisor's team.
I need a formula (non-VBA) that will fill column F. That is, a formula that will compare agents on a specific team, based on their QA scores. Though the example data range is small, this will be applied to roughly 600 agents, split up among roughly 40 supervisors. I am currently using Excel 2007.
If anybody has any ideas, suggestions, or solutions, I would greatly appreciate the help, as I have been beating my head against the desk in my attempt to figure this out.
I'm wanting to Rank a set of figures in one column but use criteria in another column to pick up the array which is used. I don't want any figures to be ignored so will have multiple rank 1's 2's etc. Would also be handy if I could use multiple criteria.
View 9 Replies View RelatedI have successfully been able to rank items using two criteria but I'm unsure of the syntax for adding a third or fourth set. I'm new to the use of Sumprodoct.
I have attached a file. Where column C and E have the same value, I want Excel to look at column F and assign a rank (formula is in column K) in ascending order.
ACEFK
ItemLife LeftTot CostBalRank
signs1 250 250 1
paint curb1 500 500 2
tree work1 2,500 2,500 3
landscape2 9,000 7,200 4
siding2 9,000 7,500 4
Here is my formula:
=IF(ISERROR(RANK(C8,C$5:C$105,1)+ SUMPRODUCT(--(C8=C$5:C$105),--(E8>E$5:E$105))),0,RANK(C8,C$5:C$105,1)+SUMPRODUCT(--(C8=C$5:C$105),--(E8>E$5:E$105)))
I've attached a file.
I posted a thread a while ago asking for a formula to rank based on multiple criteria (Rank On Multiple Criteria). The following; = SUMPRODUCT(--($A$2:$A$50=$A2),--($B$2:$B$50=$B2),--($D$2:$D$50=$D2),--($G2>$G$2:$G$50))+1)
works an absoulte treat, however is there a way to modify it so that does not allow duplicates? The data in the G column refers to time values acheived during testing of athletes, the problem arises when two athletes achieve the same score and thus they are ranked the same. However, body mass is also measured (F column) and in essence the athlete with the lower body mass has achived the better score and thus should be ranked accordingly.
I have a customer spread sheet that uses a “Ranking” to establish the next “Contact Date” based on the “Ranking” and the “Last Contact Date”.
An example is – a “Customer” with an A “Ranking” would be contacted 21 days after the “Last Contact Date”, with a B “Ranking”, 28 days after the “Last Contact Date” etc.
Is there any way that the “Next Contact Date” can be automatically up dated when the “Ranking” is changed and there are multiple rankings (A, B,C, D etc)
i would like to rank one table based on two columns, for example world cup group table to be ranked based on points but if two teams have the same no of points, then use goals scored column to break tie between them.
View 9 Replies View RelatedRanking values and ranking duplicates the same rank I'm looking to rank a group of numbers that will possibly have duplicate numbers that I want to show as a tie but have no break in the rankings.
Example:
20
18
18
15
12
11
11
9
The ranking I am looking for is:
1
2
2
3
4
5
5
6
I have a input selection, when i keyin XYZ, the data under column XYZ should be ranked in ascending order. If i select ABC then it should rank ABC data in ascending order.
XYZ
ABC
Input--->XYZ
XYZABC
15
38
26
42
Rank the column by selectionXYZABC
I have data in a number of columns in Excel which I want to sort on column B, then C, (Then D) however the formula I have entered is sorting based on column C below in ascending rather than descending order, how I can change this
=RANK(C2,$C$2:$C$4)+SUMPRODUCT(--($E$2:$E$4
I need a formula that looks at the percentage values of 3 cells and the in the next row ranks them 1st,2nd or 3rd. So for example cells A1, A2 and A3 have 30%, 20% and 10% respectively, so in cells B1, B2, and B3 I need to return 1st, 2nd, 3rd. But next week it could be that A1, A2, and A3's values are 20%, 30% and 10% respectively, and so I'd need cells B1, B2 and B3 to return 2, 1, 3, and so on. Be cool if the rows could automatically re-arrange so that whatever is ranked 1 is always on top, 2 in the middle and 3 at the bottom, but not that important. Be also cool if the 1st ranked row, chnaged colour or flashed or something, again not important though.
View 4 Replies View RelatedHow to do a ranking for productivity based on goals in six categories for my employees. I want to be able to rank them on these key categories and rank them based on the best average. For instance:
Employee #001 Ranked 1st in Sales per Hour, 3rd in Avg Transaction Amount, 2nd in Multiple Sales, 5th in Accessory Percentage
Employee #002 Ranked 2nd in Sales per Hour, 1st in Avg Transaction Amount, 1st in Multiple Sales, 4th in Accessory Percentage
I want to factor against the goals to determine each individual rank for each category and then rank based on the combination of them all.
I haven't gotten to all the additional conditional formatting but recall how to do this with ease, but the sheet in its basic format is present in the attachment below.
Employee Productivity.xls‎
How to return ranking based on students' score?
STUDENT SCORE Rank MAY 11255 4 JACK 5262 5 TIM 432525 1 STEVEN 352332 2 HUGO 32232 3 FERNANDO 5153 6 SANDY 4556 7 SARAH 2265 8
I have a list of research material based off postcodes, travel time in those areas and what I want to do is rank the the travel times in those ares within a third column.
What I have so far in design terms is this:
Origin Base
Time
Time Ranking
AB10
00:10:00
AB10
00:12:00
[Code]...
So basically I'm trying to have column c look at a and check for the lowest value in b against all other rows that have the same constant value e.g. AB10 in column a. Then to distinguish them somehow for example marking the first '1'. Also then to be able to do it for second and thrid ranking value.
What do people think? Is this doable? I think maybe a min if array but keep tripping on the fact that the ranges are all locked in a single column and inconstant sizes.
The data comes in this format and is quite large so manual editing would be a last resort.
I have a speadsheet that has a table containing scores of audits, in the last 3 columns of the tabe I have the two totals (columns AC and AD)
In Column "AF" I wish to show where they will rank based on the results, first I need to rank via the result of column AD and if that is the same as another result use column AC to determine where they rank.
I'm looking to populate tables for specific tasks that my site performs and compare their performance against the other top sites in the company. I need to pull the site # and their performance based on the task, ranking them from first to last.
View 5 Replies View RelatedI am facing some problem with ranking formulae. Attached is a file illustrating them.
Problem 1: Ranking without zero I have a set of data for products. They have a number next to it. Some of the products have a ZERO value next to them. I want to rank the data in an ascending order while ignoring the products with ZERO value next to them.
Problem 2: Ranking on multiple factors I have a set of data for 50 products. There are 5 factors based on which I want to pick the best and the worst. Each factor has a value which can be a negative number, zero or positive number.
This is what I am doing presently: Ranking the products on each factor in a separate column. Points are assigned based on the ranking, i.e. if the ranking of "product A" on Factor 1 is 32, then it gets 32 points It is assumed that equal importance [weight] is given to each factor, thus average points is calculated based on ranking of each product on each factor. Average points are again ranked in descending order The top & bottom 10 are picked from this ranking.
Number of products and number of factors can be different for each analysis. Presently I am giving equal importance to the rankings for each of the factors, what if I have to give varied importance [weight] to the factors.
I am trying to calculate players ranking based on their weight categories and attempts total, e.g. Category (50kg, 69kg etc..) Rank should be calculated automatically the highest total value of cat. 50kg is 1st second highest is 2nd etc. However, if tow players or more within the same Category have scored same point ranking will be calculated based on Body Weight less comes first and if both have similar weight calculation will be based on Start # first player comes first etc..
Table:
Start #
Name
Body Weight
Team
Category
Total Point
Rank
1
Player #1
49.2
Team #1
50kg
75
i m creating a formula that will automatically place players in the correct position based on the outcome and there rank.
I have created an example sheet and the results should be in cells E3:E15
In the attached spreadsheet I track the performance of my team. I enter the AHT for my team in the work sheet named "AHT Summary".I keep updating this data every month. automatically sort the updated data and rank the agents based on their average AHT. The person with the lowest AHT should be ranked 1. Column is highlighed in green for your reference. Based on this ranking the work sheet named "Ranking" should be updated automatically. Since I am taking a weighted average for all agents, the one who gets the lowest AHT should be ranked 1st . In the ranking work sheet the agent with ranking 1 should be given 100, the second highest ranked person should get 98,third 96,fourth 94 etc.
View 6 Replies View RelatedItem Quantity
A 2
S 7
D 3
F 6
I am looking for a ranking formula that will pull the data from the
first column based on the ranking of the second column
so that the end result will look like this
1 S
2 F
3 D
As S has the largest quantity, F 2nd largest etc
The list I will pull this from is variable in length but in the
hundreds.
i m trying to use the sumproduct formula, and OR but i cannot seem to get this right! =Sumproduct(--(A1:A10="Yes"),--(OR(B1:B10="Yes",B1:B10="Mayby")),C1:C10)
I have also tried Array Formula as follows; {=SUM(IF(A1:A10="Yes",IF(OR(B1:B10="Yes",B1:B10="Mayby"),C1:C10)))}
I have also used UDF to for the sumproduct, but cannot make that work! keep giving me value message
Function
Function Customer(Service as Range, Outcome as String, Service2 as Range, Outcome2 as String)
Customer = Sumproduct(--(Service = Outcome),--(Service2 = Outcome2), Result)
-Didnt get thru this bit to start building on the Function! keep giving me #Value!
I'm starting a dashboard, where on the front page I have two combo boxes on the left, and three empty fields to the right. I'd like the three fields to the right to auto-populate table-based values depending on the chosen criteria from BOTH fields (by store and month/date). I've attached a sample of what I've got so far. I've only provided three tables for this example, and I have a table with the same column/row titles for each metric and I have three different metrics I'd like to auto populate: COGs, Sales, and GM% or in the example, metric 1, metric 2, metric 3. No pattern in the table values, just wanted to populate the fields quickly. All fields are organized by store/month-date and I've set up a link to my combo boxes on a calculations tab.
View 2 Replies View RelatedI have a sheet name "GP", and the range "A1:A5".
I need your kind help with a code that if the cells in the range become 10, then the cell across in column B will rank the order of the cell that scored 10.
ie: if A2=10 then B2=1st, A4=10 then B4 = 2nd, A5=10 then B5=3rd, A1=10 then B1=4th, A3=10 then B3=5th.
The ranking is placed according to the which cell results to 10 first.
i need to rank database and get an output of 1, 2, 3, 4, and ect. even if the first 2 had a tie of 1; 1;. So if i have 500 records and the first 3 are tie at 1st place than the next rank should NOT be 4 but instead should be 2 and so on. Is it possible?
# Rank
65 - 1
65 - 1
65 - 1
60 - 2
58 - 3
58 - 3
50 - 4
The Excel function RANK allows one to automatically rank a number within a given range of numbers. Can anyone think of a way to do the same thing with words?
For example, imagine a list of 20 words in a column, with space to add ten more words (complete range B2 to B31, which include the last ten blank cells). If these were numbers, then in the previous column one could simply put in the RANK formula covering the full range, which would then auto update as you added more numbers to the spare ten cells of the range. Assuming that all the values being ranked are unique, and you would therefore get a unique rank number, to order them in rank order, one would simply have the list of possible rank values a column or two removed and VLOOKUP the ranks and their appropriate values.
But what if these numbers were WORDS? The first 20 words are FIXED and will not change, the next ten cells of the range could have any other words typed into them. There is no RANK function for words so how would you suggest that ranking by words is achieved, that does not require any intervention, and as new words were added to the spare ten cells in the range, then the rank would automatically update? This list of ranked words would then be VLOOKUP’d in the same fashion as above with the final list being used to fuel a drop down box, so the user would have an alphabetical listing of all the potential words in the range.
I need the folwing formula to ignore any 0 in column Q, and rank only values of 1 or greater.
=RANK(Q6,$Q$6:$Q$20,1)