I posted a thread a while ago asking for a formula to rank based on multiple criteria (Rank On Multiple Criteria). The following; = SUMPRODUCT(--($A$2:$A$50=$A2),--($B$2:$B$50=$B2),--($D$2:$D$50=$D2),--($G2>$G$2:$G$50))+1)
works an absoulte treat, however is there a way to modify it so that does not allow duplicates? The data in the G column refers to time values acheived during testing of athletes, the problem arises when two athletes achieve the same score and thus they are ranked the same. However, body mass is also measured (F column) and in essence the athlete with the lower body mass has achived the better score and thus should be ranked accordingly.
I have conditionally formatted a column of staff names where duplicates are highlighted - this is fine but there are some duplicates that I do not want to include - these all have the same criteria in that they include the suffix (v)
I have this formula below it will return multiple results is it possilbe to modified it that it will return multiple results but ignore duplicates. I would like it to be a stand alone formula no helper cells or helper columns.
Ranking values and ranking duplicates the same rank I'm looking to rank a group of numbers that will possibly have duplicate numbers that I want to show as a tie but have no break in the rankings.
I have attached an example worksheet of something that I am working on. My references refer to this sheet.
Column Descriptions: B = agents. C = the agent's supervisor. D = the agent's score. E = the agent's overall rank in comparison to all other agents. *F = the agent's rank in comparison to the other agents on the supervisor's team.
I need a formula (non-VBA) that will fill column F. That is, a formula that will compare agents on a specific team, based on their QA scores. Though the example data range is small, this will be applied to roughly 600 agents, split up among roughly 40 supervisors. I am currently using Excel 2007.
If anybody has any ideas, suggestions, or solutions, I would greatly appreciate the help, as I have been beating my head against the desk in my attempt to figure this out.
I have successfully been able to rank items using two criteria but I'm unsure of the syntax for adding a third or fourth set. I'm new to the use of Sumprodoct.
I have attached a file. Where column C and E have the same value, I want Excel to look at column F and assign a rank (formula is in column K) in ascending order.
I am facing some problem with ranking formulae. Attached is a file illustrating them.
Problem 1: Ranking without zero I have a set of data for products. They have a number next to it. Some of the products have a ZERO value next to them. I want to rank the data in an ascending order while ignoring the products with ZERO value next to them.
Problem 2: Ranking on multiple factors I have a set of data for 50 products. There are 5 factors based on which I want to pick the best and the worst. Each factor has a value which can be a negative number, zero or positive number.
This is what I am doing presently: Ranking the products on each factor in a separate column. Points are assigned based on the ranking, i.e. if the ranking of "product A" on Factor 1 is 32, then it gets 32 points It is assumed that equal importance [weight] is given to each factor, thus average points is calculated based on ranking of each product on each factor. Average points are again ranked in descending order The top & bottom 10 are picked from this ranking.
Number of products and number of factors can be different for each analysis. Presently I am giving equal importance to the rankings for each of the factors, what if I have to give varied importance [weight] to the factors.
I have the below table of data and what I am looking for is a formula that will count the number for unique numbers (col E) depending on a several criteria. So far I have got this formula but it's not working!
I have a pivot table to show the number of complaints by site and by type of complaint. This is not providing the correct information as each complaint can have can have multiples line attached to it. I only want to count the complaint once. For Example, There are 13 site locations, and several different types of complaint.
I need to add items to a combobox without adding duplicates or empty data. I am able to add without empty data but how to ignore the duplicates.
Here is what I have...
Code: Dim GL As Range Dim ws1 As Worksheet Set ws1 = Worksheets("Main") For Each GL In ws1.Range("MainGL") If IsEmpty(GL) Then 'do nothing Else ComboBox2.AddItem GL.Value End If Next GL
I need to write a macro for find a value in all sheets in current workbook. The problem is put like this: I have to write a ID (for DVD archiving) in a column but testing that generated value is unique in entire workbook (I have multiple sheets, organized by movie genre). I can use find method and testing for value <> Nothing but it always said that the value is present (the current cell value); there is any method to omit selected cell value? I think "After:=" parameter can do this but I don't figure out how to handle with it...
I am having 2 problems with dynamic named ranges. On one hand, I am getting a LOT of duplicates in some ranges and a lack of entries in those ranges that have too many blanks. Here is a sample of the dynamic named range in the first column:
This first range is called "NamedRange_1" =OFFSET(Data!$A$2,0,0, COUNTA(Data!$A:$A)-1,1)
how to eliminate both the duplicates and the blanks?
I'm wanting to Rank a set of figures in one column but use criteria in another column to pick up the array which is used. I don't want any figures to be ignored so will have multiple rank 1's 2's etc. Would also be handy if I could use multiple criteria.
I have a table that has multiple products and price points in it and I would like to add a field that ranks the products by price but for only against that product.
Product Price
Result needed is the Rank only by product based on Price
I've got 3 columns of info.. Name, Org, #Sales, $$..
I need to rank the list by:
Org, $$, #of Sales (as the tie breaker)
So, I need it to look for a specific Org Dept in Column B, rank the Dollar Amounts in column C, and if there are any ties, go to #Sales in column D and use the biggest number there to break the tie.
I've found 2 formulas..
This one was awesome for looking for the specifc Org Dept and only ranking those numbers that matched the designated Org Dept. (but this can't break any ties)..
I have set up a formula to count the occurrences of multiple conditions in a table of data (see below..) the formula reads from 4 cells of criteria but I will not always use the 4 criteria and maybe only need to use say 2 criteria - when I do this my formula doesn't work - my example below shows this... How do I make the formula continue to work when some criteria cells don't have any entries?
This table is a simple example but my main work will have a much larger table (poss. several thousand rows) and probably about 10 criteria cells, so running a big formula with 10 nested IF statements will be too cumbersome... any smart workround for this within the SUMPRODUCT formula?
I have a project that I am unable to figure out the best way how to accomplish. I have five players on our basketball that are having a contest. Each player took 25 shots. I need to rank each player's shots individually. For instance, Andrew made 24 and 23 (4th and 1st attempts respectively) so he should be 1st and 2nd while Curtis would get 3rd because he was next with 22 made shots on his last attempt.
I would like to rank the numbers multiple columns (columns B thru F) in column G (not shown but understood).
If this is not possible, is there a way to list ALL the numbers in column G using a formula (the number of students will continue to grow so I am unable to simply enter =B2 in cell G2 and restart with =C2 in cell G7 (after five entries) because the number of students will grow.
I have a worksheet (Data) that lists when pupils are in for Nursery sessions during the week. If they are in they have a 3 (hours) by their name in the relevant columns.
In the AM worksheet I now need to pull through a "register" so under each daily heading I need to pull through everyone that has a 3 next to their name under Monday AM / Tuesday AM / Wednesday AM etc. from the Data sheet. However, I don't want it to copy any blank cells. I then need to do the same for the PM sheet.
I have data in a number of columns in Excel which I want to sort on column B, then C, (Then D) however the formula I have entered is sorting based on column C below in ascending rather than descending order, how I can change this
******** ******************** ************************************************************************>Microsoft Excel - Win_calc.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutQ21= QRSTUVWX21TickerLowestLowest*NameBOALEHBEARSecond*priceSecond*name22AT*US95/BEAR10210095**23ARW*US50/LEH605070**24BSX*US65/LEH666567**25CBS*US53/BEAR/MS555453**HVOL8* [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
This is my general template. I get prices from BOA, LEH AND BEAR on the four companies listed. Then I use the Min function to tell me the best price (I'm buying). Then I use some IF statements to tell me who's the "Lowest Name" (lowest price):
It checks if a cell is = the lowest cell value, then returns the header. This formula refers to different columns than my displayed sheet because Im hiding so cells and I just copied this to another section of my sheet. There's probably a better way to do this but this is what I have do far. I use this for 50 company names and 5 or six dealer banks (BOA, LEH, etc)
I'd like column that gives me the Second Place price and one that gives me the associated dealer (BOA, LEH).
copied down to a minimum of 100 rows (names) The AGG is the sum(a:e/5) When u use RANK(agg,agg1:agg100,1) It ties Names AAAA and BBBB as they both have AGG of 0.142. Problem is the rule book states ties are split by the smallest of the results for each competitor in columns A to E. In this example BBBB is 2nd as he has smallest result in Column C being 0.08.
I have tried the AGG+1/min(a:e) and still end up with incorrect results. The problem is the numbers are so small and you have to split ties all the way to the 100th person involved. I cant use sort either as the data has to be printed in alphabeticall name order all the way to 100 names with their ranks recorded against the names.
I have a list of research material based off postcodes, travel time in those areas and what I want to do is rank the the travel times in those ares within a third column.
What I have so far in design terms is this:
Origin Base Time Time Ranking AB10 00:10:00 AB10 00:12:00
[Code]...
So basically I'm trying to have column c look at a and check for the lowest value in b against all other rows that have the same constant value e.g. AB10 in column a. Then to distinguish them somehow for example marking the first '1'. Also then to be able to do it for second and thrid ranking value.
What do people think? Is this doable? I think maybe a min if array but keep tripping on the fact that the ranges are all locked in a single column and inconstant sizes.
The data comes in this format and is quite large so manual editing would be a last resort.
I need to do a sum with multiple criteria and that can account for duplicate entries and select the correct duplicate to add. I have a sheet with 6 columns of data: TripDate, Company, DepartureTime, BookedTravelers, TripNumber, DataEntryDate. It's just a running data dump from multiple sources and times and can therefore have duplicate entries for a specific trip but where the number of people booked has changed and I need the sum to use the most recent number (dataentrydate is newest).
Example: TripDate Company DepartureTime BookedTravelers TripNumber DataEntryDate 10/31/13 A 15:30 10 111 10/01/13 10/31/13 B 15:30 11 999 10/01/13 10/31/13 C 15:30 12 999 10/01/13 10/31/13 A 16:00 20 222 10/01/13 10/31/13 A 17:00 30 333 10/01/13 10/31/13 A 15:30 50 111 10/15/13 10/31/13 A 15:30 40 111 10/25/13
Currently I have this in a seperate worksheet to break down the hourly loads where A2 is a date reference I can change to what date I need, and each company is listed in a different column with hours running down Column B from 0400-2200:
In this example there are two examples of AA, but they each have a different animal, so they need to remain separate. BB is listed twice, but has the same animal, so the total for them is 5. I am looking for a way to express this with with a formula. I tried using Sumifs, and it sort of works, but I end up with BB listed twice, and I don't need that to happen....
