I have a spreadsheet that contains per minute data for the whole year. There are no gaps in data and it is complete with various values being zero. I cannot work out how to reduce the data into 30 minutes interval. I have tried to use Pivot Tables and grouping functions but it can give me daily data or hourly data but not per 30 minutes or 15 minutes of data.
What step I can follow to reduce the per minute data to 15 minute or 30 minute data.
Entering a formula which will allow me to expand my data set by interpolating between sets of x,y values. My data set is in 5-minute resolution and I would like to interpolate so that I can output a new set of x,y values in 1-minute resolution. Here is my example of what I have and what I would like my end result to be, and also I have attached a sample of my data set in the below excel file:
Original data set Date TimeTemperature oC 6/12/13 13:30 18.28 6/12/13 13:35 17.9 6/12/13 13:40 17.9
Desired data set Date TimeTemperature oC 6/12/13 13:30 y 6/12/13 13:31 y 6/12/13 13:32 y 6/12/13 13:33 y 6/12/13 13:34 y 6/12/13 13:35 y 6/12/13 13:36 y 6/12/13 13:37 y 6/12/13 13:38 y 6/12/13 13:39 y 6/12/13 13:40y
In the attached excel file I'd like to use data that was polled every 15 minutes. i.e 00:15, 00:30, 00:45, etc. Can I do this without having to manually delete all the nonrequired data per each row?
Also I have many files of such data that and would like to combine the all them into one to represent data for the whole year polled at every 15 minutes.
I'm trying to create a macro to loop through daily one minute data.I believe the flowchart would be something like:
Create Variable
For each day in recordset
Loop through each minute record
Run system rules
Copy to Seperate worksheet
End
Additional Info:
Data is in columns B-G (Date,Time,Open,High,Low, Close)
Sample system could be something like:
If Current record close price is > Past 2 records Close Price Then Buy 100 Shares Liquidate if poistion moves against by 10% Take Profit if position increases by 5% Else close by days end
I have a large sheet with the values of power from a counter in a 15 minute base.
A B 01.01.09 00:15 0,25 01.01.09 00:30 1,15 01.01.09 00:45 0,75 01.01.09 01:00 2,01 and son on until the end of the month What I am trying to do is to create a macro which calculates the average per hour and put in another columns like this: 01.01.09 01:00 average from 00:15 until 01:00 01.01.09 02:00 average from 01:15 until 02:00 and so on until the end of the month.
I'm researching a load of financial data downloaded for me from Bloomberg. It lists daily prices of 15 commodities for nearly 20 years in some cases! Its far too much data to get anything worthwhile out of, so I'd like to know if any of you guys have used or know what the VBA is to write a macro that will reduce all the data from daily to monthly. (ie. I want a macro that will allow me to quickly delete all data corresponding to dates which are NOT the end of the month).
i have a unique transposing situation and i need a script to transpose my data. i haven't encountered anything like this yet so i wonder if its possible
my data is currently in this format:
Object1, Property1, Value Object1, Property2, Value Object2, Property1, Value Object2, Property2, Value
i'd like to transpose it to:
........... Property1 Property2 Object1 Value Value Object2 Value Value
create a Macro that runs when system clock changes minute and then at every change of minute of system clock.
For example, if I give the execute command to start the macro at 09:14:45 (HH:MM:SS), then its first run should be only at 09:15:00, then next run at 09:16:00 so on...
I already have a Macro that runs every minute from initial run time, using
Code: Application.OnTime Now + TimeValue("00:01:00"), "MyMacro"
but it seems to be unreliable, because in case I open another sheet that takes lets say 20 seconds to open, the next macro run is delayed by 20 seconds.
I am trying to convert Degrees Minutes & Decimals of a minute (12° 34.567') to Degrees and decimals of a degree (12.57611°). I have the formula to convert latitude, that is two digits, but it doesn't want to work with longitudes, three digits. (see attachment). This is the formula that I am using:
I have a problem where I extended a formula down to over 40,000 records which has increased the file size substantially. I only need it to scroll down to a few thousand rows now that I realized that there is alot less data to populate the worksheet. Is there any way to get it back to a scroll range that is more modest in size?
I am using Excel 2003 and I have two columns of data, one column shows how much work for a particular worktype should be done in an hour and the second column shows what I’m expected to get in over the next month. I have added a third column to show how long it would take to complete the expected work.
What I would like that third column to show the data in hours and minutes rather than a percentage of 100, so on a linked TAB on the main sheet it will show clearly as a time so staff hours can be allocate to a worktype. Is this simple to do. I have attached an example workbook.
I have a string of data containing hourly timestamps with a value attached to each timestamp. I need the timestamps to be every 15th minutes instead of hourly. So basically, I need the hourly value to be continued four times for each timestamp.
See the attachecd workbook. It should be quite simple, but for some reason I just cant figure it out!? A bit embarressed In the woorkbook, I need VGTs and VPTs to be in a 15 minutes granularity.
ERROR: Cannot upload workbook - uploader not showing so here are shot of the raw data:
if there are any simple steps that can be taken to reduce the size of an Excel workbook short of deleting information. I have an Excel file which is taking to long to open and save. The file size is approx 5,450kb.
The file cotains Macros, Formulae, Named Ranges and Colour formatting.
The formula works perfect - the only problem is the calc times can take 10+ minutes ( and longer with larger data sets ) because the data sets are so large. Is there another formula or way to get the same result that would speed the process up?
is there a way to reduce spaces between text stings to one space only when there are many spaces? To make it worse, the number of spaces between the text strings vary. I am using Excel 2010.
I created a slick little excel sheet with the data coming in automatically via Access query. It has been working fine for months. Now all of the sudden there are a bunch of cells with missing data. The weird part is it's not as if whole columns are missing data, more like 90% missing. When I go to Access and run the query all cells are populated as the should be. There have been no changes to the query at all during this time.
Pivot Chart. I would like to set up something to where a user can click on an individual value on a pivot chart (currently a line chart set up with 4 data series) and somehow display some underlying data. I have a lot of information stored in a data worksheet that I can't display all at once, but if a user sees a questionable data point, he/she can click and learn more about it from source data, or even a new query of the data worksheet.
I have a spread sheet with a colum showing average time to complete a task. This is currently shown as Days:Hours:Minutes:Seconds (4:19:33:19). I meed it to be shown purely as minutes, or at least as hours and minutes.
I have a formula which will calculate the number of hours and minutes between two military times. I would like it to calculate the total number of minutes instead of hours and minutes. I have uploaded a small example of what i have so far.
I have a question about using conditional formatting in excel (2010); I made a table with the following columns:
"Supplier Name" "Supplier Lead Time" "Internal Lead Time" "Total Lead Time". I made two different scenarios to show different supplier lead times and different internal lead times, and used the minimum function in the "Total Lead Time" column to find the smallest total lead time to select the best supplier.
The last thing I would want to do with this set of data, is plug in a formula that would somehow indicate which supplier corresponds to the shortest total lead time (which supplier has the smallest supplier lead time). I'd like to be able to use a formula that enters the name of the supplier in a designated cell, which I could indicate as the "Preferred Supplier" cell. If this is not possible perhaps there is a way to highlight the supplier's name with conditional formatting?
I am working on a project that has 5 worksheets. I have been able to figure out everything else I need to do but this has me stumped. I have data in Sheet1 A6, that i want to place in Sheet2 A6, Sheet3 A6, Sheet4 A6 and Sheet5 A6 and keep data and formatting(BOLD AND UNDERLINE). So I change Sheet1 A6 and the other 4 sheets change also. I'm using Microsoft Excel 2007.
I want to be able to run a macro that will export some of the data from a worksheet called Generated Report into another worksheet called Matrix. The data will be taken Generated REport and grouped into sections of the worksheet. These sections will be defined by the BRID value.
The Data that i want to export will be from the first 5 columns within the Generated Report(note there are other columns which data is not required from).
The following columns will be exported from Generated Report -
BRID,Requirement, Bug Description, Bug ID and Alt Bug ID.
BRIDRequirement Bug DescriptionBUG ID Alt Bug ID PQ115 PQ115-Login Bug Description text xihllloloj43712 123 PQ116PQ116-Landing Bug Description text ghghghgoot 43713 126
For Matrix
The data will be imported into Matrix worksheet into the following columns as part of the row headings
- Requirement, Description, Bug ID and VF Bug ID.There will also be other columns (outlined below) which i will use to manually enter data
The data will be grouped and imported into the relevant section by its BRID eg PQ115, PQ116 etc.
I want each section (marked by BRID number)to be separated by row headings.
These row headings are to be generated after populating all data within each BRID number.
When the data has been populated in each row there is a column called 'Status' which contains drop down list boxes which can be assigned.
The default status will be set to 'To Do'. The complete row headings are displayed with Output from Generated Report underneath
BRID Priority Requirment Description BugID Alt Bug ID PC UpdateNotes Actual Result Type of DEfect Test Status Tested by PQ115 PQ115-Login Bug Description text xihllloloj43712 123 To Do
BRID Priority Requirment Description BugID Alt Bug ID QC UpdateNotes Actual Result Type of DEfect Test Status Tested by PQ116 PQ116-Landing Bug Description text ghghghgoot43713 126 To Do
So far the macro that i have been using allows me to locate the data for each specific BRID in Generated Report and copy into the corresponding BRID section within the Matrix. I have to repeat this step for each new BRID and i want to be able to whole automate this process.
I have a simple reporting sheet where the data for orders place is in one sheet and on the other sheet is an imput box for 'date' and it filters through and presents a table of data and two graphs for the date chosen.
I give a daily report (contents of this sheet) but I also need to leave this sheet available for anyone to open and change to another date.
I want to copy the repor sheet into a new one and email but I want the graphs to remain, not go blank when anyone changes the original sheet.
I am working on Excel 2010. I want to find a way to link data from one spreadsheet to another one and whenever I update the first spreadsheet, the second one will be automatically updated?
What I would like to do is create a userform where I can input a case reference number and click a command button which searches the CSV/TXT file for any notes for the specific reference number and then returns all notes (seperated by a blank line) in the textbox within the userform in the posted/saved format.
I can find lots about importing to excel but nothing about importing data to userforms.
CSV file added for format. The userform contains two text boxes, one blank for import and one for completing the case reference number (format on CSV file. Line item 1).
i.e. if I searched by SL-001-0155648 I would get the below (It's not code but I thought the best way of showing what I mean):
I have created a userform with multipage, has two page that add new record in a excel sheet. Data has a unique reference no.(TxtRef.Value) for each record. I am trying to add a button to load the added data for a specific record using reference no back to userform so that it can be updated and overwrite back to the sheet in the same row, So far it is adding new record correctly. I do not know how to populate all the fields of the of an existing record and overwrite it back to the same row instead of adding a new record. Below is my codes
I have a 5000 line table I am filtering by a few columns, and I'd like to calculate an exponential trendline value.
=INDEX(LINEST(LN(R1059:R1167),W1059:W1167),1)
But I actually don't want all the values from R1059 to R1167 - I want to select only the displayed values (R1059, R1068, R1077, etc). Is there a way to select only display values to use in a formula? The problem is it would be a lot of manual work to select them all - there are 50 or so instances I would have to select 13 manual values.
I am building a rather good size userform. It is getting really lengthy code-wise because I want certain things to be enabled and disabled on the form as they click on certain options.
I know I can hard code the lines but so I am trying to come up with some coding elements where I will not have to add 20+ lines of code for everytime I want to add a new feature.
Here is one of the functions that I have, There is going to be several of these:
Private Sub chkMore2_Click() If chkMore2 = True Then cboProtocol2.BackStyle = fmBackStyleOpaque cboApplication2.BackStyle = fmBackStyleOpaque txtLowPort2.BackStyle = fmBackStyleOpaque [Code] .......
So If I click chkMore2 ... all of the 2nd elements will be editable. If I click chkMore3 ... then all of the 3rd elements will be editable, etc. etc.
So I tried to play with this code example:
Private Sub CheckBox1_Click() If CheckBox1 = True Then Call Changeit(1, "yes") Else Call Changeit(1, "no")
[Code] ........
Excel 2007 does not like the .concatenate element.
I'm trying to find a formula that looks at Column A on both sheets (each client is allocated a unique number) and if they match enter in column D of the referral sheet the month they were seen but only if it is a 1st contact (appt type on column D of contact sheet)
