I have a set of filtered data and am trying to copy data from the top visible row to the remaining rows. I can get Rows.count to do this when rows are not filtered but it doesnt work right in this scenario or at least I'm not setting it up right.
View 9 Replies
I used Sheets(1).Cells(1, 1).Rows.End(xlUp).Count instead of UsedRange.Rows.Count in this code , but it didn't succed with me. Why and how to do that
Dim i As Long, j As Long
j = 1
For i = 1 To UsedRange.Rows.Count
Sheets(2).Cells(j, "a").Value = Sheets(1).Cells(i, "a").Value
Sheets(2).Cells(j, "b").Value = Sheets(1).Cells(i, "b").Value
Sheets(2).Cells(j, "c").Value = Sheets(1).Cells(i, "c").Value
j = j + 1
Next i
End Sub
Create a formula to count number of days an employee work (in 25 working days and 5 Friday as rest day month):
Example:
If employee works 25 days during weekdays he will get counted as = 30 days
If employee works only 22 days during weekdays with 3 absences during weekdays he will get counted as = 27 days.
If employee works from 1st to 24th and 25th to 30th absence he will get counted as = 24 days.
Other examples and output desired I attached here: Sample.xlsx
My Macro opens an excel file and I've to count the number of blank spaces for every filled column. I'm using CountBlank function for that.
But, the code fails at the countBlank line by saying Type Mismatch.
Code:
Sub Snippet_Code()
Dim apdata as excel.application, wbdata as workbook
set apdata = new excel.application
Set wbData = apData.Workbooks.Open(Filename:="ABCD.xlsx")
For colnum = 1 to 50 'Columns from 1 to 50
[Code] .......
My code fails at the BlnkCnt part. I also tried assigning the two cell addresses in two variables and passing the variables to the range method. But there again, I get the error of Method Range of class _Global Failed.
What might be the error?
I have a spreadsheet of over 15,000 lines of student information, sorted by student number. I want to count the number of rows which have a duplicate student number, up to 15 duplicates in a row, and show the total number of duplicates in a Separate Column. I.e.
Column 1 Column 2
Row 1 - 200101 3
Row 2 - 200101
Row 3 - 200101
Row 4 - 200102 2
Row 5 - 200102
Row 6 - 200103 1
I've been trying to use a Countif formula, but I found I had to use so many ANDs and ORs that the formula became too long. I don't know how to use programming code, only formulas in Excel. Is there an easier solution using some type of SUMPRODUCT code?
'Private Sub Worksheet_SelectionChange(ByVal Target As Range)
'If Not Intersect(Target, Range("f6")) Is Nothing Or Target.Cells.Count > 1 Then
'Application.ScreenUpdating = False
'For Each c In Range("A1152:A1179")
'If c.Value Like "Hide" Then
'c.EntireRow.Hidden = True
'Else
'c.EntireRow.Hidden = False
'End If
'Next c
'Application.EnableEvents = True
'Application.ScreenUpdating = True
'ActiveSheet.Protect
'End If
'End Sub
The cell values in A1152:A1179 are derived from a simples If formula. I have tried to change the "Hide" to a zero value but this didn't make any difference
I have data in B4:B55 and need a formula to return a count of rows, including rows that are blank. However, there are hidden rows that need to be omitted from the count.
View 1 Replies View RelatedI'm having a problem with my macro .However, if i use the following script:
[Code]......
If i am correct all the rows with a value less than 1 should be hidden right? However, some rows are hidden when they shouldn't be.
Im working on a quotation with different products in it. And the rows with a 0 in it should be hidden and that's pretty much working. But it also hides some of the subtotals(which i dont want) and some stay unhidden.
I'm using Excel 2007 and my s/s is 360000 rows deep.
To cut+paste formulas+formats from one column to another I'm using the following
Sub move_formula_and_formats_from_I_to_L()
Dim cell As Range
Application.ScreenUpdating = False
For Each cell In Range("I1", Cells(Rows.Count, "I").End(xlUp))
With cell
If .HasFormula And Not .Offset(1).HasFormula Then
.Cut Destination:=.Offset(1, 3)
End If
End With
Next cell
Application.ScreenUpdating = True
End Sub
The code stops working after 159000 rows and highlights (in yellow) the line:
.Cut Destination:=.Offset(1, 3)
Me.Rows.Autofit with a Protected Sheet not working.
Basically I want to use vb code which is
Filtering Date Column "A" 1st qtr 2012
Column "C" has numbers where we figure the average of the entire column
Formula: =AVERAGE(C36:C300)
When I filter or not the Date column "A", the Average is still the same.
How can I force it to only average out the rows displayed by the filter
I have a macro that I am trying to add a feature to at the end of the code that hides blank rows. I have tried numerous methods based upon other forums, but my code does not seem to work and does not hide blank rows. In red is the section of code that I am having trouble with.
Sub Update()
Dim c As Object
Dim rngA As Range
Dim cc As Object
Dim AA As Range
'Check every cell in the range for matching criteria.
[Code] ...........
I am inputting rows of data to test my spreadsheet and all of the sudden the formulas stop working??
Can someone take a peak at it and see if they can tell why its no longer working at I19?
Today I am having a very annoying problem that really has me stumped – I need to work out the lag between a Due Date and Delivered Date
But as people sometimes manage to deliver on the Due Date it needs to show a zero (as in they got it in on time) but using the formula below the result is a 1 and I want a zero
Can anyone help me please? I have tried putting assorted -1s in to the formula and it looks like it might work until I copy down and find that if a person delivered one day early the result shows -3 for example!
I would like to count the no. of rows that has "Evolution" in column 8. Just a msg box to display would help.
View 8 Replies View RelatedI have a workbook in excel 2003 which I had been running the following macros (listed below). We recently upgraded to Excel 07, and neither are working. When I try to run them, the "debug" option highlights the following line in the sort macro "Range("A2:z" & lastcell).Sort key1:=.Columns(1)". This is driving me crazy, as the macros worked perfectly under the older version of Microsoft. Is there an issue with crossfunctionality between '03 and '07'.
Private Sub Worksheet_change(ByVal target As Excel.Range)
If target.Column = 1 Then
ThisRow = target.Row
startRow = 1
i = 1
Set ws = ActiveSheet
maxRow = Cells.SpecialCells(xlLastCell).Row
maxCol = Cells.SpecialCells(xlLastCell).Column
ActiveSheet.UsedRange.Interior.ColorIndex = xlNone
Do While i
I am using the following formula, I am trying to add a condition to only count the cell if it contains "host".
=SUMPRODUCT(ISNUMBER(C86:C117)*(MOD(ROW(C86:C117)-ROW(C86),2)=0))
I have used rows.count numerous times before, however, I'm getting an error now (runtime error 438, method not supported), this line is highlighted:
View 3 Replies View RelatedCount all the true statements in column A (Work) of sheet1 (Checklist), once counted insert that many rows on sheet2 in a specific location, I found a count formula just don't know how to do the insert rows part
Code:
Sub CountRows()
Dim Rng As Range, CountTrue As Long
Set Rng = Sheets("Checklist").Range("Work")
CountTrue = Application.WorksheetFunction.CountIf(Rng, "True")
End Sub
Col A Col B
163401 1
163401 1
163401 0
163402 1
163402 0
163402 0
GOAL -I want to be able to count Col B only once for the same set of records in COL A.
Based on Distinct criteria on COL A, I need to be able to count COL B. The count should be 1 for 163401 and not 2. Similarly for 163402 the count should be 1
I have a spreadsheet with rows and rows of data by date. The far left column houses the date and then each row is another occurrence for that date. Basically I need to count how many rows have the same date. Here is what the basic sheet looks like:
6/15/13
6/15/13
6/15/13
6/15/13
6/15/13
6/16/13
6/16/13
6/17/13
6/17/13
6/17/13
So the formula I am looking for would return, 6/15/13 =5, 6/16/13 = 2, 6/17/13 =3. Or something along those lines. I have a ton of data and using pivot table info to filter by each day will take FOREVER.
To find the best product for my customers I need to count the rows that I have highlighted by filling with a colour AND that contain an 'X' in the cell. Giving a total at the bottom of the row for each highlighted and 'X' cell. I cannot find any easy way of doing this and I am sure I will need to run a VBA script but cant quite get my head around how to do this. Perhaps there is an easier way to do this entirely.
View 6 Replies View RelatedI would like to have a macro which counts the rows. Description: The macro should check if there is any data in cell B7 and if there is then start the counting from one (insert 1 in cell A7). Then check if there is any data in cell B8 and if there is then insert 2 in cell A8..and so on..till there will be no more data in cell B.
View 2 Replies View RelatedI'm trying to get the 2 formulas described down below to work but I keep getting 'Run-time error: 1004 Application or object defined error'.
With the following formula I'm trying to have the COUNT function applied to;
Row 143:147
Row 153:157
Row 163:167
Row 173:177
It effectively counts the number of non-blank (>0) rows in an array. This
formula is limited, however, in that every column requires a separate
statement. I would like to find a function that could handle an array of any
size with a single statement.
100
110
000
001
3=SUM(IF((A1:A4>0)+(B1:B4>0)+(C1:C4),1,0))
1=OR(A1:C1>0) for
every row in the entire array. Unfortunately, according to this document AND
and OR functions cannot be nested within SUM+IF statements:
Dim oRow As Range
Dim cNonBlanks As Long
For Each oRow In Range("50:80").Rows
If Application.CountA(oRow) <> 0 Then
cNonBlanks = cNonBlanks + 1
End If
Next oRow
How come it still gives me "1" when the number of visible rows is 0 after autofilter?
Range("data").AutoFilter Field:=3, Criteria1:="=" & r.Value
j = Worksheets("Sheet1").Range("A2", Range("A" & Rows.Count).End
(xlUp)).Cells.SpecialCells(xlCellTypeVisible).Count
MsgBox (j)
I would like to get a simple function to count how many times the word fox is mentioned across rows , my answers are in col K .
If possible I would like to look for more than one word , sometimes two or three .
looking at row 1 , what would function be if counting fox , red , a
Sheet1  ABCDEFGHIJK1Theredfoxwasjumpingoverafox,ok 221fox,twofox.3fox.  337cowsÂ
0419thanimalwasareddogwithafoxfriend1
I am copying information from a data extraction application called Monarch and then pasting it into Excel. The data to be pasted has to be inserted in between some existing data in the worksheet. Is there a way to count the number of rows in the clipboard so I can insert this number of rows into my worksheet then paste the data from the clipboard?
View 2 Replies View RelatedI need a formula for counting rows. It should achieve the following;
It should count in increments of 1 (1,2,3,4, etc.) in each cell in a column (column AW, to be prescise).
It should skip hidden rows.
It should account for the fact that a formula is able to reveal rows and when this is
done, the counting formula should adjust to count the newly revealed row.
It should also be able to do the opposite - another formula/macro hides rows, and when this happens it should not count the newly hidden row.
I can imagine a formula in each cell of the column that says "Check the previous column and if it is visible, add 1. If a hidden row is encountered, do not add 1. When a non-hidden row is encountered again, continue adding 1."
I have a column with some rows with data, some blank and some with symbol. These data are only numbers in the format as: 3110, 4789 / 22465. These numbers are just numbers representing project number. I would have numbers only the format shown above or else a blank cell. I need to count the rows that have numbers in them. If i use count, it counts and displays only the number of rows that are similar to 3110 format but totally excludes cells with 4789 / 22465 format. How do i make excel count rows that also includes cells with 4789 / 22465 format?
