I'm trying to get the 2 formulas described down below to work but I keep getting 'Run-time error: 1004 Application or object defined error'.
With the following formula I'm trying to have the COUNT function applied to;
Row 143:147
Row 153:157
Row 163:167
Row 173:177
create a formula that counts consecutive rows that have wins and losses.
A B
1 Game 1 Win
2 Game 2 Win
3 Game 3 Win
4 Game 4 Lose
5 Game 5 Lose
6 Game 6 Win
7 Game 7 Lose
So Consecutive wins = 3
Consecutive losses = 2
I used Sheets(1).Cells(1, 1).Rows.End(xlUp).Count instead of UsedRange.Rows.Count in this code , but it didn't succed with me. Why and how to do that
Dim i As Long, j As Long
j = 1
For i = 1 To UsedRange.Rows.Count
Sheets(2).Cells(j, "a").Value = Sheets(1).Cells(i, "a").Value
Sheets(2).Cells(j, "b").Value = Sheets(1).Cells(i, "b").Value
Sheets(2).Cells(j, "c").Value = Sheets(1).Cells(i, "c").Value
j = j + 1
Next i
End Sub
I have a spreadsheet of over 15,000 lines of student information, sorted by student number. I want to count the number of rows which have a duplicate student number, up to 15 duplicates in a row, and show the total number of duplicates in a Separate Column. I.e.
Column 1 Column 2
Row 1 - 200101 3
Row 2 - 200101
Row 3 - 200101
Row 4 - 200102 2
Row 5 - 200102
Row 6 - 200103 1
I've been trying to use a Countif formula, but I found I had to use so many ANDs and ORs that the formula became too long. I don't know how to use programming code, only formulas in Excel. Is there an easier solution using some type of SUMPRODUCT code?
I want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.
But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.
E.g
Large Parts Current Stock = 50
(enter in) Large Parts Used = 2
Large Parts Current Stock = 48
(Clear field where 2 was entered into Large Parts used)
(Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
View 6 Replies View RelatedI have data in B4:B55 and need a formula to return a count of rows, including rows that are blank. However, there are hidden rows that need to be omitted from the count.
View 1 Replies View RelatedI am trying to come up with a formula that will count everything excluding 1 in one row, while looking at another row to determine the group.
The attached example explains things a lot better.
I am going to have 2 formulas. 1 for the "Big" group and one for the "Small" The formula needs to look first at the column that has the group in it. Then it needs to count everything is column A excluding "Snake" And return the value.
I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.
View 4 Replies View RelatedI have a transactional data set with a line for each transaction and I am looking to count the number of documents (each contains multiple transactions) against criteria.....
It looks something like this.....
Column A Column B
Document No Category
11000001 A
11000002 B
11000003 B
11000002 A
11000001 A
Is there anyway to do this without subtotalling for each document and then a count?
I have been using the wrong formula to count total entries in columns and only just found this error. The MAX formula in cell B4 is: =MAX($B$12:$B$36). If the all the rows are full within range F12:F36, then the MAX formula is fine to count the total within range B12:B36 (25) so I thought. But sometimes there are omissions between F12:F36. If there are 2 blank cells anywhere within F12:F36 for example, then B4 needs to show 23 respectively. In the sample WkBk B4 needs to show 8
View 2 Replies View RelatedI have a file where I want to count number of cells where the value is greater than 0. in the attachment, i just want to populate that count below the column indicated therein. So in the example, desired result is two.
View 4 Replies View Relatedin writing a formula that will count the number of times
the store is listed (Column B) when it matches with closed (Column C).
On the table listed below I will return the data using a match.
From this table
A B C
1/8/2006 9:45Store 1Closed
1/8/2006 9:57Store 2Closed
1/8/2006 10:05Store 3Closed
1/8/2006 10:09Store 4Closed
1/8/2006 10:15Store 5Closed
1/8/2006 10:24Store 1Closed
1/8/2006 10:36Store 2In Progress
1/8/2006 10:41Store 3In Progress
1/8/2006 10:50Store 4Closed
1/8/2006 10:58Store 5Closed
1/8/2006 10:59Store 1Closed
1/8/2006 11:15Store 2Closed
1/8/2006 11:22Store 3In Progress
1/8/2006 11:24Store 4In Progress
1/8/2006 11:33Store 5Closed
1/8/2006 11:51Store 1Closed
1/8/2006 11:56Store 2Closed
1/8/2006 11:57Store 3Closed
1/8/2006 12:03Store 4Closed
1/8/2006 12:16Store 5Not Started
1/8/2006 12:23Store 1Closed
1/8/2006 12:28Store 2Closed
1/8/2006 12:57Store 3Closed
To this table
A B C
1/8/2006 9:45Store 15
1/8/2006 9:57Store 24
1/8/2006 10:05Store 33
1/8/2006 10:09Store 43
I would like to count the no. of rows that has "Evolution" in column 8. Just a msg box to display would help.
View 8 Replies View RelatedI am using the following formula, I am trying to add a condition to only count the cell if it contains "host".
=SUMPRODUCT(ISNUMBER(C86:C117)*(MOD(ROW(C86:C117)-ROW(C86),2)=0))
I have used rows.count numerous times before, however, I'm getting an error now (runtime error 438, method not supported), this line is highlighted:
View 3 Replies View RelatedCount all the true statements in column A (Work) of sheet1 (Checklist), once counted insert that many rows on sheet2 in a specific location, I found a count formula just don't know how to do the insert rows part
Code:
Sub CountRows()
Dim Rng As Range, CountTrue As Long
Set Rng = Sheets("Checklist").Range("Work")
CountTrue = Application.WorksheetFunction.CountIf(Rng, "True")
End Sub
Col A Col B
163401 1
163401 1
163401 0
163402 1
163402 0
163402 0
GOAL -I want to be able to count Col B only once for the same set of records in COL A.
Based on Distinct criteria on COL A, I need to be able to count COL B. The count should be 1 for 163401 and not 2. Similarly for 163402 the count should be 1
I have a spreadsheet with rows and rows of data by date. The far left column houses the date and then each row is another occurrence for that date. Basically I need to count how many rows have the same date. Here is what the basic sheet looks like:
6/15/13
6/15/13
6/15/13
6/15/13
6/15/13
6/16/13
6/16/13
6/17/13
6/17/13
6/17/13
So the formula I am looking for would return, 6/15/13 =5, 6/16/13 = 2, 6/17/13 =3. Or something along those lines. I have a ton of data and using pivot table info to filter by each day will take FOREVER.
To find the best product for my customers I need to count the rows that I have highlighted by filling with a colour AND that contain an 'X' in the cell. Giving a total at the bottom of the row for each highlighted and 'X' cell. I cannot find any easy way of doing this and I am sure I will need to run a VBA script but cant quite get my head around how to do this. Perhaps there is an easier way to do this entirely.
View 6 Replies View RelatedI would like to have a macro which counts the rows. Description: The macro should check if there is any data in cell B7 and if there is then start the counting from one (insert 1 in cell A7). Then check if there is any data in cell B8 and if there is then insert 2 in cell A8..and so on..till there will be no more data in cell B.
View 2 Replies View RelatedIt effectively counts the number of non-blank (>0) rows in an array. This
formula is limited, however, in that every column requires a separate
statement. I would like to find a function that could handle an array of any
size with a single statement.
100
110
000
001
3=SUM(IF((A1:A4>0)+(B1:B4>0)+(C1:C4),1,0))
1=OR(A1:C1>0) for
every row in the entire array. Unfortunately, according to this document AND
and OR functions cannot be nested within SUM+IF statements:
Dim oRow As Range
Dim cNonBlanks As Long
For Each oRow In Range("50:80").Rows
If Application.CountA(oRow) <> 0 Then
cNonBlanks = cNonBlanks + 1
End If
Next oRow
How come it still gives me "1" when the number of visible rows is 0 after autofilter?
Range("data").AutoFilter Field:=3, Criteria1:="=" & r.Value
j = Worksheets("Sheet1").Range("A2", Range("A" & Rows.Count).End
(xlUp)).Cells.SpecialCells(xlCellTypeVisible).Count
MsgBox (j)
I would like to get a simple function to count how many times the word fox is mentioned across rows , my answers are in col K .
If possible I would like to look for more than one word , sometimes two or three .
looking at row 1 , what would function be if counting fox , red , a
Sheet1  ABCDEFGHIJK1Theredfoxwasjumpingoverafox,ok 221fox,twofox.3fox.  337cowsÂ
0419thanimalwasareddogwithafoxfriend1
I am copying information from a data extraction application called Monarch and then pasting it into Excel. The data to be pasted has to be inserted in between some existing data in the worksheet. Is there a way to count the number of rows in the clipboard so I can insert this number of rows into my worksheet then paste the data from the clipboard?
View 2 Replies View RelatedI need a formula for counting rows. It should achieve the following;
It should count in increments of 1 (1,2,3,4, etc.) in each cell in a column (column AW, to be prescise).
It should skip hidden rows.
It should account for the fact that a formula is able to reveal rows and when this is
done, the counting formula should adjust to count the newly revealed row.
It should also be able to do the opposite - another formula/macro hides rows, and when this happens it should not count the newly hidden row.
I can imagine a formula in each cell of the column that says "Check the previous column and if it is visible, add 1. If a hidden row is encountered, do not add 1. When a non-hidden row is encountered again, continue adding 1."
I have a set of filtered data and am trying to copy data from the top visible row to the remaining rows. I can get Rows.count to do this when rows are not filtered but it doesnt work right in this scenario or at least I'm not setting it up right.
View 9 Replies View RelatedI have a column with some rows with data, some blank and some with symbol. These data are only numbers in the format as: 3110, 4789 / 22465. These numbers are just numbers representing project number. I would have numbers only the format shown above or else a blank cell. I need to count the rows that have numbers in them. If i use count, it counts and displays only the number of rows that are similar to 3110 format but totally excludes cells with 4789 / 22465 format. How do i make excel count rows that also includes cells with 4789 / 22465 format?
ÁreaAplicação Tp ModeloData Produção
SPCContas Internacionais PDM01-01-2009
OPEDOL PDM02-06-2009
OPE PCOL PDM01-04-2009
OPESINTRA PDM12-03-2009
SPCSGF PDM04-05-2009
SCMControlo Vendas PDM21-02-2009
SCMClientes Ocasionais PDM03-04-2009
SPCContas Internacionais LDM14-01-2009
i need to count the number of rows that have the Tp Mpdelo="PDM" and The Date is lower of "31-03-2009".
i count number of all rows with:
Dim countall As Long
countall = Sheet1. Range("a1", Sheet1.Range("A65535").End(xlUp)).Rows.count
this is the total of all rows, including hidden. how do i count the hidden rows which have been filtered?
preferably not a loop, isn't there a way to use "entirerow.hidden" and count that?
