I have the following code that makes the user enter a number between 0 and 40 for a textbox. However, I want the user to be able to leave the box blank as well, and not be forced to enter a 0 if there were no hours.
If TextBox1.Value > 40 Then
MsgBox ("Week 1 Regular hours must be between 0 and 40.")
TextBox1.SelStart = 0
TextBox1.SelLength = Len(TextBox1.Text)
TextBox1.SetFocus
' Multiple boxes with same code to finish If statement
I want to automatically prevent users from entering more than two digits into a textbox.
i dont want to show a message box or anything like that. I want it to be physically imposible for them to enter more than two digits i.e. when they enter two digits, pressing any other keys on the keyboard should have no effect on the contents of the textbox.
I am working in Office 2000, and have 3 Textboxes, I need to copy text from Textbox1 and Textbox2 to Textbox3, and the code below works but only when the character length is limited. I need to be able to show much more text. Suggestions. I am trying some of the code
Option Explicit Sub Text_Copy() Dim ch1 As Characters Dim ch2 As Characters Dim ch3 As Characters
With Sheets("Aim Up Description") Set ch1 = .Shapes("TextBox1").TextFrame.Characters Set ch2 = .Shapes("TextBox2").TextFrame.Characters End With With Sheets("Description Summary") Set ch3 = .Shapes("TextBox3").TextFrame.Characters End With ch3.Text = ch1.Text & " " & ch2.Text End Sub
I have found code on other posts that I have tried (like, Range("A16").Value = Val("TextBox1"),
In Userform1 I have several textbox and one commandbutton1. If I mouseclick on a textbox and click commandbutton1 the letters YES is entered in the texbox. To prevent double click entry into the same textbox I set the maximum length property at 3. However, setting the maximum length to 3 does not work. Subsequent commandbutton1 clicks will result in an infinite YES entries.
Is the maximum length property disabled when commandbutton entries are applied?
I have a workbook with 3 sheets. Sheet 1 contains a month of data with Customer Name and Product Code, and quantity shipped (columns A, B, and C). Sheet 2 contains Product Code and quantity produced (Column A and B). In Sheet 3, I have the customer name listed once by running a pivot table against the data in Sheet 1. I need to show the quantity produced for each customer in Sheet 3 but not exceed the quantity produced for that Product Code in Sheet 2 even if the quantity shipped was greater. For example:
Sheet 1 Customer A - 100 shipped of Product Code X Customer B - 200 shipped of Product Code X
Sheet 2 Product Code X - 150 produced
Sheet 3 Customer A - 100 total Customer B - 50 total
Customer B would only be allocated 50 as there was only 150 produced and Customer A was allocated 100 of the total 150 produced, leaving 50 to allocate to Customer B.
I am trying to define/name a range in vba. The range will always start in the same place, but as more information is appended to the data set it comes from, the more (or less) rows it can populate. I want to limit the length of the range because I am using it in a data validation drop down list and i do not want to see all of the blanks at the bottom of the list.
Checking the "Ignoe blanck cells" box in data validation did not make the spaces disappear, probably because there is data in an adjscent column that goes much further down the worksheet.
I have a user form that writes data from textboxes 1, 2 and 3 into the next empty row in a speadsheet but what i want to do is write the data into rows 1 to 100 then start again at row 1 overwriting the data. The reason is that i have the rows linked to a graph and want to continually show the last 100 results and never have to manually delete old data.
have created a list obx using data validation. My question is, is there a way to limit the data available on the list.
Example: sheet 1 A1 A2 A3 Address A address p address s Date
Sheet 2 has data validation list that consists of all of A1 a named range called "address". Everything works great. I now want to be able to limit the available choices in the list depending on what cell the user is in
example: if user is in sheet2 a1, i only want them to be able to pick address that have an "A" or "p" in cell A2 on sheet 1
I tried to acomplish this using conditional formatting, I format my named range with different colors, but the colors do not carry over to the data validation list on sheet2.
I am trying to limit the format of data to all cells in a column to 2 letters followed by 6 digits. The letters and the numbers are not required to be the same, but the person entering can only enter in that format.
I have a user form with textboxes on it, in some text boxes, text should be entered, but in some number should be entered, and in some date is required, but How can control the entry, if some one type text instead of number, then it should not be accepted. NOTE: Before I have seen such example here, that uses the KeyPress event.
I need cell H18 to look at cell F4, and if the value in cell F4 is 'CFB', I need validation to limit the entry in cell H18 to the values in a named range 'pripro' to populate. That part I know how to do. (=pripro)
But if the value in F4 is CCP, I need H18 to allow anything. I'm having trouble adding this to the first part.
I have a macro that runs every 15 minutes and stores data into a table. This table is attached to a chart and auto updates with the new data every 15minutes. The table will house historical data over time, however I only want the chart to reflect the last 96 entries (15min data points over 24hours). So, once i have enough data my table will be A2:A97. When A98 is populated, i want the data in A2 to be removed from the chart only.
Here is a breakdown:
A2:A97 is currently displayed on the chart. I enter new data into A98. The chart will now display A3:A98. I enter new data into A99. The chart will now display A4:A99. I enter new data into A100. The chart will now display A5:A100. and so on.
How I can accomplish this? Does this need to be done in VBA?
Is there a limit to the number of entries in a validation list? I have a list that contains about 300 entries, but the drop-down list only shows 246 entries. I am sure that the references are correct.
I need to create a Drop Down Menu that gets it's data from another group of cells. I have done this before but it has been sometime ago and now I can't remember.
When you want to use Data Validation to limit the entry of the number of characters to a cell does this apply only to the cell that you are entering the characters or can it also apply to a cell that contains a LEN(A1) formula, for instance? Also,does the Data Validation limitation function includes spaces as well? Will the message appear while you are entering the characters (when it has reached the limit) or will it wait until you have hit Enter?
Can I limit the text length in a cell that contains a formula? You may say "Limit the text length in the input cell". That can't be done because the formula in the resultant cell takes text from two other cells in addition to the input cell. I need to limit the overall text length to, let say, 50 characters.
I have a section of my program that asks for board scores (point value is 6-10 in increments of .5) I have set up a data validation so that users can only enter those specific values. Problem is, none of the values can be more than 1 point from each other. (the part I have yet to figure out)
Example, if the first value is a 6.5 the second is 7.0 and the third is a 9.0, I need the data validation to display an error because the 9.0 is beyond the one point spread.
Summary: Display an error message if any of the points are more than 1.0 point from another.
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”. I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
i am using the code posted by Reafidy on [html] http://www.ozgrid.com/forum/showthread.php?t=62708[/html] to create a list of all possible combinations. The only problem i have is that sometimes the total no. of combinations exceed the excel row limit of approx 65,536. once the row limit in column 1 exceeds 65k, the remaining combinations automatically shift on column 2 and then on 3 n so on.
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
I have a userform used to input vehicle information. To prevent any errors, is it possible for data Validation to be set in a listbox to accept upto 7 characters (both numbers and letters)
I have a Userform that has a TextBox named TextBox5 when double click, it opens a calendar form. When the calendar closes it places its value into TextBox5.
I have a userform that I use to enter data on a worksheet. Cells on the worksheet are populated from data in textboxes. The problem is that the formula that is in those cells, needs to stay to update the value when other data is changed, resulting in a different value. So basically, I need the value from the textbox in the userform to populate the cell, but keep the formula.
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
