I am using this string of code below to name a cell by converting variable Cmt1(Long) into a string variable cellname. I cannot get the line of code below to run. It works fine if I assign a string in "" marks to the variable. I need the variable cellname to match the contents of Variable Cmt1, which in theory it does as written. This is all part of a much longer string of code which runs just fine. I am just an entry level VBA user. I understand objects, properties, variables, etc.
Dim Cmt1 As Long
Dim celln As Range
Dim cellname As String
The problem exists with the lists I use. I have a "settings" sheet, where users can choose from preset values to run in the program. E.g. "Urgent", "Semi Urgent" and "Non Urgent" (there are a lot more values, but those will do for now." and the idea is to run them 1 at a time.
However, I've now determined that 99% of the time, they're going to be run 1 after another, that is to say run the program once for "Urgent", then again for "Semi Urgent" and then again for "Non Urgent". So I'd like to loop through these. Again, not a problem, you'd think.
So I added a new value to the list; "All" which users can select to invoke a list. Again, not a problem, I already have the list as a named range, "DmgList" and I can cycle through it. I ran the following test code to see if it would work in theory...
I need to remove the letter within the middle of a persons name.
For example, if the person is called 'Michael J Fox' then it needs to be edited to show only 'Michael Fox', if the person is called 'George W Bush' then only 'George Bush' should be displayed etc. However the persons name should remain as is if a middle character initial does not exist.
I have several workbooks (5) with the same variables (columns- A:Q) but with a changing amount of rows (2:n, not including the headers). Each row corresponds to a date range (usually a week) for a particular person (up to 40 people) plus a few other values.
I would like to have a way of "merging" or "compiling" the 5 "seed" workbooks into 1 "master" worksheet. Where rows 2:n of each of the 5 "seed" workbooks are added to the master without any duplication of the same name-date range combination. Also, the master worksheet should not include the rows which only contain a name and date range but for which all the other variables are zero or missing.
Each "seed" workbook would have a button that sends the data over to the "master" worksheet.
Is this a really difficult project? Feasible for someone with near to zero VBA experience?
I attached 3 files to show you what I mean. The 2 "seed" files are merged into the "master" file. Please note that in the files only 2 names are used, but the "seed" files could contain any combination of 40 some names. Also note that the length of rows which contains data in the "seed" files is variable, although it should not be longer than 16 rows + the header row.
my macro comes up with an error on the Consolidate line that says 'Cannot add duplicate source reference'. I have a workbook with a variable number of tabs and I want to consolidate-sum (not copy and paste) the data from the various sheets onto a summary sheet within the same workbook. I'm at the point where it all works fine until it hits Consolidate.
Option Explicit Sub ConsolidateExport() ' ' ConsolidateExport Macro
Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells: $DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001 q9002 q9003 q9004 q9005 q9006 etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
Find Multiple instances of Numeric Criterion in Row & Return To a Single Column.
I have a Dynamic Named Range "Data" spanning 10 Columns and many Rows. Each Row may contain duplicates of the Numeric Criterion.
I would like to find ALL instances of a specific Numeric Criterion across each single Row in the Dynamic Range "Data" and have the Results returned to a New Sheet in a single column.
NEW Sheet: The Numeric Criterion is housed in G5. The matched criterion should be returned to the New Sheet starting at G7. Duplicate instances in the same Row should ALL be returned to the same cell in Column G on the New Sheet.
Sample Data Layout: Columns I J K L M N O P Q R Row No.76 1 0 1 1 0 1 1 1 0 1 Row No.77 2 2 3 2 1 2 2 0 0 0 Row No.78 3 3 3 3 3 0 3 0 3 0
Scenario: Looking for Numeric Criterion 1 (one).
Expected Results - New Sheet: Row No.7 Column G (Cell G7) 1111111 Row No.8 Column G (Cell G8) 1
In Row 76 of the Sample Data ALL seven Numeric Criterion of 1 (one) should be returned to the same cell G7. In Row 77 of the Sample Data there is only one Numeric Criterion of 1 and it should be returned to cell G8.
I Want users to be able to copy a reference number from a an external program into excel, this works well for single cells but the cell I want them to be able to paste the information into is a merged cell and keep getting the "Data on the clipboard is not the same size and shape blah blah error". What I can do to get this information to paste? Is there some VBA that can kinda trick the cell to believe its single or when pasting it unmerges and then remerges again?
I have a string of text in cell A2. In cell B2 of my spreadsheet is a formula that calculates a number based on the text string in cell A2.
I want to write a VBA loop that removes a single character from the cell A2 string, then calculate the new value in cell B2. I want this loop to continue until the value in B2 falls below a set value (in this case 60).
My code so far Sub trim_text() Dim mytext As String Dim myanswer As Integer mytext = Range("A2") myanswer = Range("B2") Do While myanswer > 60 mytext = (Right(mytext, Len(mytext) - 1)) Loop End Sub
This obviously does not work. In my excel table I have a formula in cell B2 to calculate "myanswer" will this work, or does that code have to be placed into the VBA code?
Looking for a formula (not macro) that can do the following:
I have a spreadsheet and in one column, it has last names of clients. In the next column, it has full names of clients that are the same account, but different system with different descriptions for the name. I need to lookup the column that just has last name and see if that last name exist anywhere in the "Full name" column. If it does, then I need column C to say "Yes" or something along those lines.
The "full name" column isn't always in the same format and sometimes doesn't even contain the "last name." Sometimes the last name will be first and sometimes there's a comma and sometimes there isn't a comma. The spreadsheet attached shows a good short example of what I'm working with...
I am in need of a way to pull keywords listed in B2:B10 from text in A2:A10 and then those pulled keywords combined in cell C11.See attached document. So I have colors for keywords in column B and some random text in the column A including the keywords in parenthesis. Is there a way for a formula to find all keywords in A2:A10 and then list them in cell C11 with commas in between.So the result would be one cell C11 showing BLUE,GREEN,BLACK,ORANGE, etc.I have been trying to mess around with index and match and while I could get one to pull up I don't know how to combine it.
I would like to format cells with a currency based on a value selected at the top of my worksheet. Cell C3 is a drop down of currencies. And I would like cells range E11:E200 to format in whatever currency selected in cell C3.
I have problem with function, I have array with random numbers in cell G1 and columns with X in some of the cells, now I want to check the cells with numbers from cell G1 in column F to see is there X or not if yes count if not do nothing. In attached example result should be 3.
I have a cell with data such as: a0001-0004, a12, C8AF7-8, b17, j35-40 and i want it to output in the same cell(basically write-over the data): a0001, a0002, a0003, a0004, a12, C8AF7,C8AF8, b17, j35, j36, j37, j38, j39, j40.
123569LOC23 is in one cell and I am trying to copy the "LOC23" to a new cell. However, the amount of digits vary: LOC23, LOC1,LOC15 etc all the way down the column.
I'm trying to put both text and cell value from another sheet in a single cell.
I've tried: ='sheet'!cell"text" Doesn't work.
Also, I understand this is somehow it's supposed to be done ="Total: "&A12 But I need the cell data to be from another sheet and also I need the text to succeed the cell value.
Going by the above example, I tried: ='sheet'&cell"text" But that also doesn't work.
I have a large data which is placed in single cell and I want to copy it into a template which is merged cells any I'm stucked. My data is very large and I can't unmerged the destination data(they are merged vertically). So I wonder is there a way to copy a single cell in a merge cell.
to search for specific text in a cell but not just one word or letter, in fact it could be many. I need to first verify that the exact texts exist in a table and then match the various text instances with corresponding data in that table.
At the moment, this works to search for one type of text and verify it's exsistence in the able and indeed return the corresponding value, but i need it to do it for all verified texts
Split the single into two, is this really possible in excel?To be precise dividing cell A1 into two different cells(No merging, No text to column option).
What I’m trying to do is get a single cell to look at an array, if there is a number in that array which is between 2 limits to return that number. This is eventually going to work with limits of dates/times, and have to be updated once a day. I’ve attached a workbook with an example of the data and the way I want it formatted. {=IF(AND(A1:A25>=D32,A1:A25<E32),A1:A25,"")}
But this always returns a false. I can get it to work without using array and just having cell to cell logic but this means I would need the same amount of columns in the formatted data as the raw which is impractical.
I'm working with the sort of data that spills over into multiple cells if you try to paste it without first putting the cursor in the function window. Is there any way to change this default behaviour (or, alternately, automatically redirect the cursor to the function window every time I hit "enter" and go to the next cell)? I'm working with literally thousands of entries, so the time spent double-clicking and/or manually redirecting the cursor to the function window adds up after a while.
I have a spread sheet that is protected. I would like to have cell G5 unprotected when a checkbox is checked. I am able to unprotect the entire sheet by checking the box but I only want G5 unprotected. My current macro that unprotects the entire sheet is
Sub Checkbox_Clear2() Sheets("Input_Personnel").Unprotect ("1") If Range("J12") = False Then Range("G5").ClearContents End Sub
Is there a way to change the highlighted line where it only unprotects cell "G5".
I have {1,2;3,4} in *one* cell, and {9,7;8,10} in another cell. How can I sum those arrays? The result may be in one cell, or in a 2x2 range. Plain Excel, no VBA.
