Using Name As Worksheet Reference
Sep 4, 2005I have a defined name that holds the names of each relevant worksheet I want to calculate.
Lets Say I want to sum every A1 in each worksheet in the defined name. How would I go about doing that?
I have a defined name that holds the names of each relevant worksheet I want to calculate.
Lets Say I want to sum every A1 in each worksheet in the defined name. How would I go about doing that?
I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:
Code:
=COUNTA(ABC!A:A)
What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say
AAB
ABC
CDE
And have a formula in column B that converts this to
=COUNTA(AAB!A:A)
=COUNTA(ABC!A:A)
=COUNTA(CDE!A:A)
I've learned that simply substituting the cell references A1, A2, A3 for AAB, ABC and CDE doesn't work. What do I need to do to achieve this?
I need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.
I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.
Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?
I have a worksheet with additional worksheet name listed in Column G, starting in G3.
I want to run this formula on each sheet, using the value in Column G as the WORKSHEETNAME.
=COUNTIFS(A7:A1000,">12/31/2010",A7:A1000,"<1/1/2012",F7:F1000,"Excluded")
Faulty example of what I'm trying to do:
=COUNTIFS('WORKSHEETNAME'!A7:A1000,">12/31/2010",''WORKSHEETNAME'!A7:A1000,"<1/1/2012",''WORKSHEETNAME'!F7:F1000,"Excluded")
I've tried INDIRECT, but I cant seem to make it work.
I am writing a macro that will use information from the worksheet in use and the one prior to it. The problem is I do not know how to reference the worksheet that will always come before the worksheet in use. To fill you in, I have a monthly budget worksheet that tracks all my monthly financials. What I like to do is compare this months balances (cash, equity, bonds) and see the amount of loss/gain and percentage from the month before.
Here is what i currently have implemented.
This macro was written in the month of October. For this function the macro I wrote will take Octobers cash balance and subtract it from Septembers cash balance. This will give me the gain or loss. Now the problem is if I were to run this macro in November it will still reference September not October. I always want the macro to use the month before (the 1st tab to the left) not a specific tab. I wrote this macro using relative references so I do not understand why it will not use the tab before. Can someone please shed some light on this for me?
With the below code that will refenece a worksheet that has a space inbetween words, produces an error.
Code:
Me.Range("L11").Formula = "=United States!P32"
If I rename my sheet without the space, and get rid of the space in the Code, I'm okay
I would really like to keep the space in the Sheet name but can't seem to get a code to act on it.
I have tried:
Code:
Me.Range("L11").Formula = "=United_States!P32"
how to do this.
I want to select a specific worksheet by it's VB name. In other words, if the sheet comes up as: Sheet3 (ESF) in the VB Editor, I would like to choose it using the Sheet3 designation. I can do it using the (ESF) designation using:
Sheets("ESF").Select
But I prefer to use Sheet3 so when the users change the name, the macro still works.
I have a worksheet that changes monthly but has the same fields always. I have created a few macros, and one that is a 'RunAll' for ease of use. Sometimes there is an error and I have to go back and fix some data, So I am looking for a way to change the "SelectBzzAgent" Macro to link data to a new sheet instead of copying. I have attached my spreadsheet.
View 3 Replies View RelatedI have a formula to extract the worksheet name and add the "!" to it so it can be used in a copied formula... I'm just having trouble writing the formula to reference the text in the cell with the worksheet name. If it's easier, I also have the list of worksheets without the "!" - e.g., Sheet1, Sheet2, Sheet3, etc...
I want the formula to calculate, in my example, the sum of 2 cells on a different worksheet.
Been having some trouble with this using VBA. I can't seem to get the code to run properly.
Actually, if there is a way to get a right footer on one worksheet to be referenced in a cell on another, that would be even better but I haven't been able to find anything like that.
I need a VBA code to reference the cell value to activate a particular worksheet name. In the sheet "Ini", Range ("B4"), there is a text of "Rawdata" This text is used to reference to the specific Sheet name and activate it.
However, I am unable to get my code to work. Thus, I changed it with a ' with green highlights for the following lines:
'Worksheets.Open Filename:=DataRawSheet
'ActiveSheet.Range("A1").Select
Reference_Cell_to_Sheet.xlsm
Maybe it's not as complicated as i'm thinking, but i'm trying to figure out a formula (or macro) that will let me basically fill in a blank from a (nearly) irrelivant second worksheet. The only similarity the two will have is a PO number, or in my picture diagram, it's a letter. The worksheet that i'm trying to fill in the blank from has maybe 1500 entries, the worksheet i am referencing to has roughly 11,000, so sorting it would make no difference and the columns would be very inconsistant with eachother, but the rows will be similar.
I want to start a formula in Sheet one, that looks at the Letter in that same row, finds that Letter in Sheet two, and gets information from the same row but a few columns over. I might be explaining this poorly, so here's a picture of what i'm referring to. I'm trying to fill in F6 in Sheet 1 with information from F2 in Sheet 2.
I have my inventory based in excel. Each brand has it's own file. Each file has several worksheets with all of the items, prices, etc. on them. When I get a shipment, I fill out the next worksheet in line. This way- I have a record of my inventory and a worksheet for each shipment. It has been working very well. The first worksheet in each file is a summary page that shows me the grand totals, shipping charge, etc. from each filled in worksheet page. the problem is I have to build that summary page for each worksheet I fill in.
I would like a way to tell excel to give the same information as I requested in the previous row, but the next worksheet down.
I am trying to use a match index formula to retrieve some data from another workbook...I am wondering if I can use a worksheet name as an IF condition, i.e. I want my match index formula to search the entire workbook, and return values for which there is a match, with the IF conditions being a specific code AND worksheet name.
View 1 Replies View RelatedI have a Workbook that has a macro that, as of now, is referencing the Workbook's file name. I'd like it to just be referencing the worksheet itself (it is in the same workbook) so that when the file name is changed, the macro still works.
I know which part needs to be changed... just not what to!
Code:
Sub CopyData()
Dim Cell As Range
Dim DstWkb As Workbook
Dim DstWks As Worksheet
Dim R As Long
Dim Rng As Range
Dim RngEnd As Range
Dim SrcCols() As Variant
Dim SrcWks As Worksheet
[code]....
I am trying to use the sumif and indirect function together but I keep getting an error and I'm not sure why.
Actual formula:
=SUMIF('SWG OR'!B:B,A168,'SWG OR'!E:E)
Using the sumif/indirect function, I have the following:
> Cell B5 contains the name of the tab "SWG OR"
=sumif(indirect(B5&"!B:B",A168,B5&"!E:E"))
I've done this loads of times before but doing it this morning seems to not be working at all.
Previously I'd be in Sheet 1, I put the equals sign, I click into Sheet 2 in the cell I want, hit enter, and hey presto the external cell is referenced in Sheet 1.
However, what I'm trying to do here is not reference individual sheets within an excel document, but reference a totally separate Excel document. Can I do this or not?
If so how? Because when I select the second worksheet after I've entered the = sign, it just takes me to the second sheet - it doesn't seem to 'remember' that I'm in the middle of a formula.
I am trying to use a match function to determine which row information resides on so that I can update other information on that row but I am having problems setting up the match function.
The information is obtained from a combobox on a user form which identifies the correct address and then additional information is added to other fields on that line in the spreadsheet. PropertyListAll is a dynamic named range looking at the first column in the spreadsheet. the data starts in row 11.
My code is as follows, but I am getting error message 438. I am assuming I am referencing the workbook and named range incorrectly but I have tried various different combination all to no avail.
Code:
Dim wb As Workbook
Dim ws As Worksheet
Set wb = ThisWorkbook
Set ws = wb.Worksheets("Team Vals - Take ons")
rownumber = WorksheetFunction.Match(cboProperty.Value, ws & "!PropertyListAll", 0)
Sheet1.Range("tblTakeons").cells(rownumber, 2).Value = txtDate.Value
I have a worksheet with a name that inckudes a hyphen, e.g. 1234-5678.
And I have the worksheet name in a cell, say, I!.
Using
=INDIRECT(I$1&"!YADDA")
I get a REF error because of the inclusion of the hyphen in the worksheet name.
How can I fix this without eliminating the hyphen?
I have recently learned a little about Excel. Enough to be able to do our payroll for my company on it. My question is: On the 1st page of my workbook, is my quarterly report which shows all taxes, social security, and medicare we hold out each payday for each employee. The rest of the worksheets are for each employee. How do I have each employees withholdings automatically go to my quarterly report page?
View 5 Replies View RelatedI'm trying to reference a cell on another worksheet in my criteria and the formula doesn't seem to be working. All I get is a value of 0.
= SUMIF(G3:G76, ">='City Wide'!B6",I3:I76)
If I replace 'City Wide'!B6 with an actual number the formula works. This does not help as 'City Wide'!B6 is a value that can change.
I have a workbook with 50 worksheets, each worksheet has an Alpha name (ie names of people). Rather than write some code to go through each worksheet to create a report, is it possible to write a formula in a "Reports" worksheet that reads something like
=worksheet10!f2
where worksheet10! is the number of the worksheet (as seen in the VBA project window) while the name is "Billy".
On choosing Auditing Funtion, Trace Dependants, a small icon representing a spreadsheet ? appears at the end of a dashed line. What does this refer to?
View 3 Replies View RelatedI need to enable and disable command buttons in my code. These command buttons are located on sheets. I assume that I can simply set the Enable property, but I am having trouble referencing the command button. I thought I could simply reference it by name but that is not working.
View 3 Replies View RelatedHow do I reference the value contained within a combobox using VBA?
I have tried the following:
ActiveSheet. OLEObjects("cmbSearchType").Object.Value
ActiveSheet.OLEObjects("cmbSearchType").Value
Sheets("mySheet").OLEObjects("cmbSearchType").Value
Sheets("mySheet").OLEObjects("cmbSearchType").Object.Value
I'm wanting to use the drop-down combo box as a simple way for the user to choose what type of search they wish to perform on the spreadsheet. The search algorithm chosen depends upon the current value show in the combo box.
I am using Excel 2007.
I'm having to copy formula on a tabulation sheet that compiles information from other worksheets, and I need to change the formulas in each row to refer to the successive worksheets. Right now I don't know any other way than changing the formula in each cell, and this is taking way too long.
Example:
One cell's formula: =COUNTIF('5'!$F$21:$T$50,TABULATION!C$5) In the next row down, I need it be: =COUNTIF('6'!$F$21:$T$50,TABULATION!C$5), then =COUNTIF('7'!$F$21:$T$50,TABULATION!C$5), and so on.
[URL]
Is it possible to copy a formula and have the worksheet name increase incrementally instead of the cell reference? Example: In column A, I have the following -
=TDI_SR_F_1!$G$1
=TDI_SR_F_1!$G$2
=TDI_SR_F_1!$G$3
I want to copy this across to column B, but instead of just copying that exact foruma across I am wanting a formula that will update the worksheet reference to:
=TDI_SR_F_2!$G$1
=TDI_SR_F_2!$G$2
=TDI_SR_F_2!$G$3
TDI_SR_F_2 is the worksheet after TDI_SR_F_1. NB - I cant use find and replace function as it will change the '1' which is part of the cell reference ($G$1) to a 2 as well. I know I can use TDI_SR_F_3 as a search string, but the process is going to be extremely tedious, i.e. there are literally over 100 rows I need to do the find and replace on.
I have the following line in VBA which works.
[Code]....
I have a variable for the column adress of the second part of the formula so it looks like this:
[Code] ....
But it says I don't have the correct syntax.
I need to create conditional formatting on a worksheet where I need to change the cell colour based on 6 cases.
The VBA that I have found does not work with referenced cells to another worksheet in the workbook which I need as all the data is referenced with calculations.
I also need to specify the cells that the VBA will apply to as I need to apply 6 or 7 different different sets of conditional formatting on the same worksheet to different groups of cells.
I am trying to open a stored file on a network drive (with the file location stored in cell E4). When I try to run the macro, I get an error message on Line 3. (Sheets(E4.Value).Activate)
Does anyone know what I can do to fix this, or have a better method to open the closed files?
I've read that it's possible to reference information from a closed sheet, but I don't think that I'm experienced enough in VBA to take on that effort yet.