VLOOKUP - Multiple Data Range(s)
Oct 14, 2008
I extract data from a system and originally it extracts it in one sheet.
I would then use another list on another sheet and see if there is a match from the first sheet.
What problem i am having now is that the extraction from the system comes through in two sheets(because its too large) so my original VLOOKUP statement which was: =IF(ISNA(VLOOKUP(A2,cobject1,1,FALSE)),"No","Yes") only works for the one "sheet".
But now I have two sheets which hold the table "cobject" so i have named the first one "cobject1" and second; "cobject2". I figured out a way to do it but i would like the formula that i would need for me to use, for me to check the above match but from the two different "tables".
View 2 Replies
ADVERTISEMENT
Dec 6, 2013
i have a set of data in which i'm trying to lookup a value from a range of file #'s (ex 100-125) that i have concatenated with a file ID (ex 123456789). as of right now i have to vlookup each individual concatenated number, return the result value in its own column (one for 100, one for 101 and so on..) and then sum all 25 columns to get the final number) is there a way to vlookup the range (ID+100:125) and sum the results?
here's the formula i use for each column starting with 100, A2 representing the file ID, C:O being the array
=IF(ISERROR(VLOOKUP(A2&100,$C$2:$O$10000,13,FALSE)),"0.00",VLOOKUP(A2&100,$C$2:$O$10000,13,FALSE))
View 14 Replies
View Related
Feb 10, 2010
I need to run a vlookup to find some data. But I have a lot of data about 600,000 lines. Currently this list is spread over several columns (as the limit is something like 50000). How can I make my reference range access multiple columns?
View 5 Replies
View Related
Jan 14, 2009
Can you use VLOOKUP or a similar formula to lookup and add (or even better average) multiple data from one sheet?. For example the source sheet holds certain codes for each of our agents and I need the total of one particular code for each agent and then eventually work out the average for the day. But as the source sheet can hold 30+ agents it would be a long and tedious job to do seperate Vlookup's (especially as we are backdating the last year!).
I have attached a snapshot of the source data to try to explain what I need better.
From that source data I need to get the total/average of all the 101 codes.
View 4 Replies
View Related
Jan 5, 2014
I have a excel doc we use at work to create a schedule for our technicians.
Each sheet is a week, so the sheet names are Week 2, Week 3, Week 4.
Each technician number is listed in column B (3,4,5,36,53,91, etc)
Row 5 has Mon-Sun
The techs work schedule is in the appropriate cell. (8 to 5, 10 to 7, Vacation, etc)
I want to count the number of shifts for each tech each week, with a running total for the year. It was easy to do it on each sheet with a simple countif formula. But The problem comes when I want to count them for the whole year.
I tried creating a "stats" sheet and make vlookup formulas to call the data from each weekly sheet. But with all the techs and shift types I want to count, it was like 40,000 cells. Excel wasn't able to calculate it, it had the "processing 0%" in the taskbar.
I thought I could use =sum(Week1:Week52!AZ6:BN50), which is where I have the counts from each weekly sheet. But my data is not always in the same spot on the sheet. Because of techs coming and going (new hires, people quit).
View 2 Replies
View Related
Jun 23, 2009
Sheet 1 has one column
Customer Number (unique)
e.g.
111
222
333
444
Sheet 2 has two columns
Customer Number
Email Address
e.g.
111-----billgates@msn.com
111-----billgates@microsoft.com
111-----billgates@hotmail.com
222-----davidbeckham@mufc.co.uk
222-----davidbeckham@fa.co.uk
333-----me@test.com
444-----you@test.com
Now, when I do a vlookup on sheet one to obtain all email addresses for customer 111, it only returns the first email address - e.g. billgates@msn.com
Ideally, I would like;
Is there a function that can achieve this?
If not, can the multiple occurrences be returned in one cell, separated by;?
View 9 Replies
View Related
Jan 8, 2010
I have to write some VLOOKUP formulas to pull several items from a report, the problem is there could be multiple items for each lookup value as the example below:
Company Data ABC Monday ABC Friday ABC Thursday DEF Friday GHI Monday
I need to reference every piece of data for every company but using the VLOOKUP formula, I am obviously only able to get the first instance of the lookup value (company ABC)
How to I write the formula to lookup the other data? The practical appliation I am using this for has anywhere from 300 to 400 lookup values.
View 9 Replies
View Related
Jul 11, 2014
Basicly i have a list of information and i need to be able to enter a start data in one cell and a end date in a different cell and then return all the dates between them.
View 1 Replies
View Related
Feb 16, 2009
So i have a spreadsheet that has a list of members and how many events they have attended. That is fine because i achieved this by doing a countif function on their account number. The spreadsheet has to sheets Events Attended TOTAl and List. In the list it has their name account number and what event they attended and what date. What i need is to have a function that will lookup their account number and return what event they attended but they might have been to 4 different events.
I have a total of 5 columns dedicated to Event attended so we can tell it to lookup first event and return result then have an if function in the next column to lookup event and if its returned in previous column move onto the next event attended.
View 14 Replies
View Related
May 6, 2014
See the below columns: Column A and Column B. I would like to get all the data in column A to become column names and the data assorted under these column names vertically.
Column A Column B
0_country Canada
0_employee_type HE
0_province" AB
[Code] .........
I would like the end result to look like this
0_Country 0_employee type 0_province
Canada HE AB
USA HO CA
UK HL XY
View 1 Replies
View Related
Feb 9, 2007
I have an excel file with multiple worksheets that contain data that needs to be collated
There are a # of different product #s on all spreadsheets I need a total qty for each product # by calculating the qty of each style # (ie how many I1 across all sheets?)
Its 1pm now and need to calculate all by 2pm!
View 9 Replies
View Related
Jul 14, 2009
I am running a Vlookup on a large set of ID#'s that exist accross multiple servers.
The data is structured in (2) columns how you see below , and you will notice that the same ID# can show up on multiple servers.
However, the VLOOKUP is only returning the first match it finds.
Assuming that I want to keep the data structured as is, how do I make the vlookup return all matches?
ID# LOCATION
23 SERVER1
34 SERVER4
23 SERVER2
13 SERVER1
17 SERVER3
34 SERVER1
View 10 Replies
View Related
Jan 15, 2010
I have created a spreadsheet to show some reports and I wanted to serch for some datas which overloops themeselves. If you can have a look at a test file I attached you will see the full picture. I have 2 tables, where the 2nd one is on the right side of the 1st one. 1st table:..............
View 3 Replies
View Related
Jan 25, 2010
I am trying to use a VLookup to pull a value out of a range and return my intended data. See attached spreadsheet. The data I'm pulling from is in the top chart. The bottom chart, in the factor column, is where I want the data to pull to. Ex) If the "Months of Development" column in the bottom chart =13, I want it to pull the factor value from the top chart where the month is 13. The problem is that the top chart has a range of values in the "Month Range" column of 13 - 24. I don't know how to get the VLookup to recognize this and pull the same factor into the chart below whether the value is 13 or 24. Maybe VLookup isn't the best option here.
View 2 Replies
View Related
Dec 12, 2011
I've found a nice looking formula for looking up multiple values from a Data Validation List which you can find here.
Unfortunately I dont know why im getting a #REF! error for one of my spreadsheets. Here is my Formula {=SUM(VLOOKUP(A2,D:D,{6,7,8},0))}
A2 is the Data Validation drop down list that has most of the Values (Letters & Numbers) I want to look up. D:D is where it will find the Values (Letters & Numbers) and {6,7,8} is the currency I want added up and displayed.
I've tried this formula on other spreadsheets with success, but no success with the spreadsheet im working on currently.
View 3 Replies
View Related
May 20, 2009
I have a range called List that has 3 columns of data:
Corporate Human Resources Services PMA
Corporate Procurement Director
Ops Central Customer Services Lost Property Office
Ops Travel Information Travel Info Call Ctr
Ops Travel Information Centres Travel Info Centres
I have 3 columns on the entry sheet called Business Unit (Col A), Department(Col B) and Sub-Department (Col C). I want to limit the choice in column B to based on the selection in Column A in the form of a drop-down list e.g choosing Corporate gives a list of Human Resources Services; Procurement.
I am using the list option for field validation and the following formula in cell B2: =INDIRECT(VLOOKUP(A2,List,2,0)). I'm not sure what I'm doing wrong as I don't get a list of options just a blank cell. Do I need to use a different formula other than VLOOKUP..?
View 3 Replies
View Related
Jun 8, 2014
I am attempting to place a formula in cell b3 in the attached spreadsheet on the "sheet to pull data into" tab 1 (cell is highlighted yellow) to retrieve value in the yellow highlighted cell in the "Sheet that contains data" which is on a seperate worksheet within the same workbook.
The cells highlighted red in the "sheet to pull into" tab (cells: a1, a3, b1, and b3) are the criteria that needs to be matched to those cells on "sheet that contains data" tab in order to ensure the value returned is correct.Sample of problem.xlsx <----see the attached sample spreadsheet.
View 2 Replies
View Related
Feb 13, 2014
I have a report I am attempting to populate with data from a pivot table in another worksheet. Column A holds all the reference numbers (primary key), column B contains various start dates, and I want column C to contain all the payments made since the start date for each reference number.
The source data is a pivot table with Row = Reference number, column = transaction date, values = transaction amounts. This is an extremely large table, as I'm processing data from almost 1,200 cases, which each have around 20 payments spread over the last year, on completely random days. What I would like to do is build a formula in my report which looks up the records for the reference number from column A, and then adds up all the payments which have been made after the date in column B (and ignore any payments in the table which are before that date).
And to make things more complicated:
if an error is generated, it needs to return as 0, not #N/AThe report has the dates in UK format dd/mm/yyyy, but the pivot table has the dates in SQL format: yyyy-mm-ddThe pivot table is connected to a SQL database via ODBC and has to refresh every time it is opened.
=IF(ISERROR(VLOOKUP(A2,'Transactions'!$A$2:$B$1194,2,FALSE)),0,VLOOKUP(A2,'Transactions'!$A$2:$B$1194,2,FALSE))
View 5 Replies
View Related
Feb 9, 2013
what VBA is required to have a combo box in a userform look up data in a different workbook, then populate that data into the drop down list of that combo box for a user to select.
I have managed to successfully create a vlookup for a combo box in a userform that looks up data in a named range in another worksheet within the same workbook and then populate that data into a field in a worksheet within the same workbook. However, I want to change this so the combo box on a userform (in one workbook) will look up data from a named range in a second workbook without opening the second workbook. At the moment, the code I have that will 'submit' the user selected data from the combo box drop down list works.
The code that has worked so far to vlookup data for the combo box from a worksheet within the same workbook is:
Code:
Private Sub UserForm_Initialize()
Dim pName As Range
Dim ws As WorksheetSet ws = Worksheets("vlookupsheet")
For Each pName In ws.Range("ProjectName")
With Me.cboProjectName
.AddItem pName.Value
End WithNext pName
Me.cboProjectName.SetFocus
End Sub
Do I need specify the file path of the second workbook that will contain the data for the combo box as well as the name of the worksheet and named range in that second workbook?
View 4 Replies
View Related
Jan 25, 2014
I'm doing a study of wind turbines, which are spread over a test field. There are 6 turbines, each checked once a day and produces a value. I look up what the weather man says it should be, "Reported" field.
Compare141622263647
DayWind1Wind2Wind3Wind4Wind5Wind6Reported
2872 6918243519
2867122327303133
2854111324324619
28422232527284624
28319233136454627
282411182841448
2819121622264814
28016242530344549
The "Compare" field values must match all values for each turbine. The speeds identify the location with the best match speed against output of power generated. As each value in "Compared" is the best speed for that type of turbine.
View 4 Replies
View Related
Jun 16, 2014
I am trying to create a macro to gather a data range from multiple files placed a folder and combine them into a single worksheet which can be easily totaled. I've used some similar code I did for another project to gather the data. It starts by listing the file name and then the data set (About 40 cells) below the file title. However, the data sets from each spreadsheet are filling themselves into a single column one after the other, whereas I would like to have them populate one worksheet's data in each column.
[Code]......
SummaryWorkbook.xls
View 1 Replies
View Related
Oct 27, 2009
say that i have alist of data in "A2:A", which are a string file (text) and i want to rename each data to a certain name that defined in range "B1:B2" (String file too).
For Example: for range
C2 = S16e
C3 = 16/E
C4 = 18W
C5 = Site18 w
& The target name is to be:
B1=16E
B2=18W
For case above, i need to replace C2&C3 in to 16E, while C4&C5 to be 18W.
View 8 Replies
View Related
Feb 7, 2014
Certification and Training tracking.xlsx
I want to create a certification only list on a separate tab of training that has been completed where a certification has been issued (as indicated by a "Y" in the "Certification?" column on the training tracking tab) and then populate from some of the fields vs. all of the fields.
What I have now, only pulls the first occurence, not all occurences. I saw that I could have identified the multiple columns that needed to be populated, but it didn't work either, so I'm fine putting a separate vlookup in each column.
View 6 Replies
View Related
Feb 11, 2014
I would like to loop through cells row wise.
Columns which have data are A:E
modify below code to select the range from columns A to E?
[Code] ........
View 3 Replies
View Related
Nov 15, 2013
I have a sheet with 5000+ entries, column A is an ID number, column B has one of 4 outcomes C,D and E are just times and quantities and are not important.
In column A there could be multiple entries of the same ID number.
In column B it will show Pcid243A, Pcid243B, Ddar400A or Ddar400B.
I need to export (to another sheet) any entries with the following conditions:
A = ID number with any instance in B showing both a 243 and 400 condition.
E.G
A B C D E
AA565677878D - Pcid243B - C - D - E
AA837632823G - Pcid243B - C - D - E
AA837632823G - Pcid243A - C - D - E
YA74846CC - Ddar400A - C - D - E
WW768765364F - Ddar400A - C - D - E
WW768765364F - Ddar400B - C - D - E
WW768765364F - Pcid243B - C - D - E
AA73262362G - Ddar400B - C - D - E
In the example above, I'd need the red cells exporting to a new sheet as they meet the conditions of having the same ID and both a 243 & 400 outcome:
A B C D E
AA565677878D - Pcid243B - C - D - E
AA837632823G - Pcid243B - C - D - E
AA837632823G - Pcid243A - C - D - E
YA74846CC - Ddar400A - C - D - E
WW768765364F - Ddar400A - C - D - E
WW768765364F - Ddar400B - C - D - E
WW768765364F - Pcid243B - C - D - E
AA73262362G - Ddar400B - C - D - E
Now I've spent ages trying different things and can't get anything to work...
View 3 Replies
View Related
Oct 29, 2012
I'm trying to do a Vlookup on a file that gets automatically downloaded to the computer from a website. The data is in lots of different data sets, like so:
Loans to countries
Mar
Apr
May
Jun
Loans to banks
Mar
Apr
May
Jun
Every month a new row of data gets added to each table, meaning the start and end cells of the array also shift each time.
View 4 Replies
View Related
Aug 11, 2014
I am trying to create a formula which looks in 1 cell to determine 'IF' it states either "BUTT CUT" or "DIE CUT" and then does a VLOOKUP in a table array for each which ever column relates to asnwer to 'IF statement.
This is as far as I have got but even this won't work:
=IF(I15="BUTT CUT",=VLOOKUP(J15,V13:Z22,2,FALSE))
View 7 Replies
View Related
Feb 11, 2014
Selecting the range from Multiple Column data.
Currently, it is:
[Code]....
I have data from columns A:E
View 4 Replies
View Related
Aug 27, 2012
I have a problem whereby I have a list of data that has a date, a transaction and a balance. I want to be able to rearrange this data into multiple tables, one for each month.
The pictures below explain the situation better, on the left is the list of data I need to sort, and on the right is how I'd like the data displayed. So for the May columns I would like to display all transactions that happened in May and, depending on whether it is an income or an expense, the amount in the corresponding column.
i.e. so the finish result looks something like this:
View 9 Replies
View Related
Jul 13, 2009
I'm currently trying to vlookup the same data from 2 different sheets. Here is the code i've tried.
View 4 Replies
View Related