Using Index To Get Data
Apr 21, 2006
On sheet one you see a grid where for each person you can enter a value for a specific date. On sheet two you can see how we are able to find each date a person had a value of "P" entered. I need the file to do just a little more so I'm not even sure this is the best way to go anymore.
What I need, is for the data to appear as it does on Sheet3. Just two columns no formulas. I also would like a way where a quick click would show the dates where “V.’s were entered. Some problems / considerations: This is a mockup. The actual file I use contains Hundreds of names. Second, instead of looking for the values here on sheet1. I may need it to look for the values in a separate workbook on sheet1. I added c:lookhere[sch.xls] before the sheet1 reference in the formula
View 3 Replies
ADVERTISEMENT
May 8, 2007
I have a multiple column spreadsheet (Call it- "Money") whereby I need the data identified based on a list of account numbers and return this data to a new sheet.
In "Money" I have:
IE; columns B, C respectively have cust #A100 & 20.00
columns E, F respectively have cust #B100 & 40.00
columns G,H respectively have cust #C100 & 60.00
Etc.
(above for illustration-there are 100 lines of data in these columns with varied account numbers and respective dollars)
So what I have now is a new sheet I have named "Control". I have listed all my account numbers like A100,B100 etc. in column A. These are the account numbers for ident purposes.
I need the data entered in "Money" identified by those columns B,E,G with respective amounts from C,F,H and based on the list I have in "Control" whereby in "Control" if A100 is listed in column A then the figure to be returned in column B is all the data bits found in all columns C,F,H from the entire sheet "Money". Tough to explain but ie below....
View 17 Replies
View Related
Jan 9, 2014
Essentially, I would like a user to be able to select a PUB from the Data Validation drop down in row 2 of the PUB RATES sheet so that the corresponding information in the DATA sheet autofills.
Currently, this works only for the first column under each PUB when selected and this fills across all 4 columns (rather than the respective information for each column filling).
Also, the Data Validation dropdown includes blanks which I would like to exclude.
I have used a Range Name for the Data Validation of each PUB so that these can be drawn from a separate sheet as I don't want all the DATA content on the same sheet as the PUB RATES content.
View 4 Replies
View Related
Aug 4, 2009
I am using INDEX functions to extract up to 2 items of data which I now need to extend to upto 6 items.
The spreadsheet shows a list of staff initials and a day by day work rota of (M)ornings, (A)fternoons, (N)ights and (O)ffs. What I am needing to do is to identify only those staff who are rosterred Off and to place those intials in the two sets of colored cells in rows 5 and 7.
The attached spreadsheet, Tester1.xls shows the 2 existing INDEX functions in use. These can only detect the first occurrance of "O" and the next. I now need to be able to extend this functionality to cover all "O"'s in both section 1 and section 2. So, eg if 12 Aug is input to B15, I can only select IB and GG, but I now want to be able to see MG in the next blue cell.
View 3 Replies
View Related
May 7, 2009
A while back i got some assistance from a very helpful member with a formula to retrieve a value from the left most column, that was greater than Col "min" and less than col "MAX" from a range of values.
I never really worked out how this functioned and can’t really make it out of the help files on excel. I am now trying to do a similar lookup from a table of values but only need to find the row value using a greater than less than operation, using a single column.
The original formula was
{=INDEX(A:A,MIN(IF((INDIRECT("MAX")>B3)*(INDIRECT(“min")<B3),ROW(INDIRECT("min")),"")))}
Where B3 was the number to be compared against.
View 2 Replies
View Related
Jan 7, 2010
Is it possible to create an index of cell data (in my case personal names)? And if so can it be done so that each entry is a button to click to go to the cell?
Would save a lot of manual labour....
View 9 Replies
View Related
Jun 10, 2006
I have a table A3:C118 and I am filtering the data and finding the subtotal for the maximum value in column C. How do I find the corresponding data point for column A? I have tried several formulas and they are not giving me exactly what I need.
View 3 Replies
View Related
Jul 7, 2014
I am working on a spreadsheet where I need to have data from different sheets added but based on the instructor whose data I want to see in the summary sheet. I want to be able to type the name of the instructor in a cell and have all of the data appear below. I believe that an index match formula would work, but I do not know how to have the data from the different sheets added nested in the formula.
View 2 Replies
View Related
Dec 29, 2009
hope the below example is clear to understand and makes sense .....
View 10 Replies
View Related
Oct 24, 2008
I have a project that has several worksheets of "summarized" data all pulled from one worksheet. The data worksheet is run through an external program and pasted into the workbook to update the information.
To this point I have used tons of index match array formula's to pull the information but I've found this to be extremely inefficient because there are hundreds if not thousands of formulas, and it takes several minutes to update. The file is also around 3MB which is way too big.
I was thinking about using VBA to simplify the worksheets, but then I came across an article about D_Functions and I'm thinking they may be the solution to my problems.
However there is one catch...I'm not sure how I would build these formulas to work in my worksheets. I understand the principle behind the D_Functions, but I can't seem to grasp the concept of integration and making it work in my scenario.
I've attached an example of this workbook, it has most of the forumla's deleted out to reduce the file size, but it should give you an idea of what I'm doing. Once you open it you'll have to unhide some columns to get to the nitty gritty of the sheet.
Feel free to take a gander...I'm open to any suggestions you may have at this point (except to trash the whole project hehehehe ). If you find a solution please explain the concept behind it. I really want to learn how to make this work rather than plugging in someone elses formulas.
View 10 Replies
View Related
Apr 4, 2012
I want to fill some data to be filled automatically but i am not getting the formula. here is what i want...
When i write customaer name in sold field (b3) all the entry should automatically be filled (g3 h3 i3 j3)in his credit account from (a3 c3 d3 e3).
Somehow i managed to get it work(for one field only) but there is a problem in my formula
Here is my formula =INDEX(A3,MATCH($L$1,B3,0),0)
Note:- l is where i wrote customer name in leaves blank spaces when other customer name comes
View 9 Replies
View Related
Mar 27, 2014
I'm hoping to make a dynamic sorted list for each Mfg (H - T) using the garbled data input in columns B & C.
See attached : sorted list.xlsx‎
View 5 Replies
View Related
Jun 11, 2014
I've 1 master file with event info (dates, times, categories, prices etc). I have another file to track sales which uses index match to pull data from the master file (stored on a server) instead of double entering.
Upon opening the sales file, all the index match cells are blank until opening the master file, even after saving.
Is there a way to make the file retain all the data it pulls without setting manual calculation (manual spreads like a virus to other user's files - finance manager almost killed me last time)
I currently have a macro button set up to open/close the master file, but if I try to filter/sort the data without the master file open it all disappears again.
View 1 Replies
View Related
Jun 24, 2014
I have the first sheet named "DPF" where I have a column "Date", "FIT", "Group" On my second Sheet named "Tracker" what I do want to do:
I select a date for example 18-07-2014 (Cell E3), if cell E4 I Have "Fit" and F4 "Group" In C6 I have E3-15, to get the date minus 15 days (03-07-2014) In C7 I have E3-12 (06-07-2014) and so on
What I want is, if the date of today is C6 or C7 or whatever, use the index match function to get the number corresponding to the date chosen (18-07-2014) for the FIT. But, once I get the figure, I want to keep it, because with the if function, once we are the 4th of July, the figure for C6 disappears...
Fri
18-Jul
FITGroup
Start
D-1503-Jul
D-1206-Jul
D-909-Jul
D-612-Jul
D-615-Jul
D-216-Jul
D-117-Jul
D18-Jul
So either a macro to copy the specific data into another sheet or a another way to keep it. Because the idea as the end is to do different scenario based on the result got per period..
View 2 Replies
View Related
Feb 4, 2014
How to deal with duplicate data in excel using index and match function. Is it possible to use the following function without having a unique value?
View 1 Replies
View Related
Jan 7, 2013
Using Excel 2010.
Rows 1 and 2 (range: A1:CM2) within Spreadsheet X contain the range of data that I need.
Within Spreadsheet Y, Row 6 will change monthly and will be input by the user. The value in Row 6 equals the data in Row 2 in worksheet X.
I need to put a formula in row 4 of spreadsheet Y that returns the value of Row 1 in Spreadsheet X.
Unfortunately, I cannot change the spreadsheet layout, otherwise I could do an HLOOKUP formula using Spreadsheet Y Row 6 and Spreadsheet X Row 2 and be done with it. I assume that I need to use an Index-Match formula, which I am not as familiar with. In addition, all of the online support I have found explains Index-Match with data in columns, not rows.
View 1 Replies
View Related
May 10, 2013
I need a formula that effectively reformats data.
Original data:
Country
Name
2010
2011
2012
A
John
5
6
7
B
James
3
4
5
Into this format:
Country
Name
Year
Value
A
John
2010
5
[Code] ...........
View 5 Replies
View Related
Nov 4, 2012
I have several spreadsheets referencing the "Data" sheet's table (about 35 columns, and the row lengths will differ from 10 to several hundred).
I need to be able to filter the table in "Data", and have the hidden rows not show up everywhere else in the document. I have both vlookups and index formulas in the other spreadsheets, and what I'd like to do is be able to filter by any column in the table and have only the shown results show in the other sheets.
I know this might be accomplished using subtotal, and Row, etc., but how to set it up with the different formulas I have going on in the sheet that pull data from the table. I need this to work with both the vlookups and index cells.
View 1 Replies
View Related
Mar 25, 2014
Currently i am using index and match in excel but however i am unable to get the result tt I want.. what i need is
Data to check with item master whether all 3 (article, color code and size) matches and if it doesn't match, which of the field is wrong. (eg: wrong color code, wrong size or article don't exist).
[Code] .......
Above is my item master
Data to check
[Code] ........
Example case: 1
Checking first row of data check
Article number: 2-50660147
Color code: 6
Size: M
Result: "Wrong size"
But however, it returns as wrong size as it only reads the first time the article number appear in the item master and does not recognize the second time the article number appears with the correct color and size.
View 9 Replies
View Related
Oct 26, 2009
I have a spreadsheet with multiple columns. (Sheet1) The heading row is my customer name. (Sheet1) My column are the dates. On another spreadsheet, I would like to find the customer in Sheet2 in Sheet1, then do an index to find the relevant data I need, returned in Sheet2.
Sheet2: find customer "ABC" in Sheet1, if found, then find the date that also matches Sheet1 and Sheet2, and return data "apple" .
sheet1
DATE ABC DEF
2007-04-01 £55.60 £61.13
2007-04-02 £56.33 £60.27
2007-04-03 £52.14 £62.58
2007-04-04 £51.69 £61.28
sheet2
CUSTOMER DATE RATE
DEF 2007-04-04 This should be £61.28
ABC 2007-04-02 This should be £56.33
View 3 Replies
View Related
Mar 18, 2014
I've got large set of data(Column E) for dates from 2007 to 2013(Column B). Here dates are in chronological order.(Attachement) Now I want to match the data in to dates in Column H. Here dates are in random order. I used =INDEX(E3:E40582; MATCH(H3;B3:B40582; 0)). But it doesn't work.
View 5 Replies
View Related
Nov 27, 2012
I have a list of data in columns Q R S and i need to in between each line insert the data from columns D E F underneath and then underneath that the data from G H I
so bascially i have a list at the moment like this
Q
R
S
[Code]....
There is 2 sheets in total , 1 i need to inc 1-1 draw as above and the other sheet to be exc the 1-1 draw . I have attached an example of what i am trying to achieve . can offer as i have had this on excelforum.com with over 150 views and no solution
View 2 Replies
View Related
Oct 30, 2006
I am now trying to get the Index worksheet to extract data from the sheets that it has indexed, for example, it returns the sheet name, but i want it also to return the value that is contained in C2 and C3. Is this possible? I have attached the code which i am using below for ease of reference.
Private Sub Worksheet_Activate()
Dim wSheet As Worksheet
Dim l As Long
l = 1
With Me
.Columns(1).ClearContents
.Cells(1, 1) = "INDEX"
.Cells(1, 1).Name = "Index"
End With
For Each wSheet In Worksheets
If wSheet.Name <> Me.Name Then
l = l + 1
With wSheet
.Range("A1").Name = "Start" & wSheet.Index...................................
View 2 Replies
View Related
Aug 5, 2014
I'm trying to build an Index-Match formula to retrieve a number from a "data" sheet onto a "summary" sheet.
In example spreadsheet, I need to retrieve the stock price on a specific row from "data" sheet, and as an alternative, the most recent price.
View 6 Replies
View Related
Apr 30, 2009
I have a list of data that I'm using the index - match function to output data based on user input.
For example, I have:
1 10
2 15
3 20
So when '1' is selected another cell outputs '10'.
However what I want is for example if 1.25 is input, I want it to interpolate to spit out the correct number between 10 and 15.
View 5 Replies
View Related
Jan 2, 2013
I have sheet full of data containing results of multiple tests on various equipment.The sheet contains many columns of data but below are the specifc criteria i want to use to extract the data. As maintenance is carried out regularly the list is always growing. I want to create a dashboard summary of the "Machines" which i will colour using condition formatting. I will list the machines in the columns and would like the rows below each machine to be populated with the results.
Column 1 Lists the various factories
Column 2 Lists the Machine
Column 3 Lists the Part
Column 4 Lists the result.
Results can either be "ok", "warning", "Alert" only
View 6 Replies
View Related
Nov 12, 2013
I need a little coaching on big data. I have two reports, one from a production system the other from the invoicing system. I need to reconcile the two reports to ensure our invoicing ties out to production. At this time I am focusing on 1 particular item code, but there are potentially hundreds of item codes.
I have 1 Item Code.
I have a around a hundred invoices. (Sample 100)
I have a few hundred different customers. (Sample 100)
I have several hundred lines of billing data. (Sample 650)
I have several thousand lines of production data. (Sample 40,000)
In the billing system, per invoice I might have 1 or more billing lines for this item, usually no more than 2.
In the production system, per invoice I might have 5 to 50 or more production lines for this item per invoice.
Example
Prod System:
30 lines of data has a run amount and a total run amount for each line.
I am looking for tools to reconcile this data. VLookup and Index/Matching is not cutting it. VLOOKUP does not move beyond the first line found. Index/Matching wants to add all the prod together. I can get subtotals easy enough. I have tried Concatenation, but when it takes multiple production data lines to equal 1 billing line, this does not work. I needs some thing that can look at the Qty on a billing invoice and tie it out to various lines of production data to identify which production jobs went on that line of the invoice.
Here is a sample. These are fairly easy to resolve, but others are not so easy due to number of production and billing rows.
Invoice number
Billing item
Est. Quantity
Actual quantity
Billable Qty
Sales order
Position number
Sequence
Agreement
Billing source
Description
Total Billable Qty
[Code] ..........
View 4 Replies
View Related
Jan 19, 2014
Trying to grasp the concept of using these 3 functions to search for and return values from a data sheet.
The attached spread sheet has performance data for a group of employees.
What I need to do is find a particular employee then return a value for one of the category's.
For instance, I need to find "10TE03 ANGIE HOLLIS" Parts Usage on color or cell C10 in the attached sample.
Sometimes new category's are added to column A adding to the number of rows so a simple offset is not reliable.
Once I get that working, I then need to use a named range to total and average different data points for groups of employees by teams.
Maybe Offset-Index-Match is not even the way to go here?
View 7 Replies
View Related
May 30, 2014
code that will be able to lookup a cell in Column J of Sheet1 by using a lookup value on Sheet2. The lookup value can be any cell in columns B, D, F, H, J, K, or N on Sheet2. The tricky part is, I want the result of this lookup (the result comes from Column H of Sheet1) to be placed as a data validation input message for the cell directly to the right of the lookup value when this cell is clicked.
For Example: Lookup Value is "416991" which lies in cell N8 on Sheet2. Look it up in Column J of Sheet1 and return the appropriate value "X" from Column H of Sheet1. "X" will then appear as an input message when cell O8 of Sheet2 is clicked.
View 1 Replies
View Related
Jan 29, 2014
I have 3 calculations I would like to make based on data in the spread sheet and I can't seem to get them to work with data from the two separate columns.
I tried a few of the index match max formulas I found here and could only get them to work with one column of data.
I have the spread sheet attached and the 3 calks I want to do are blank on the bottom.
I am using Excel 2011 for Mac
View 7 Replies
View Related
