how can I sum up all the "Type of Defect"[CR, LOF, DR] for a specific Welder. They were tag as Welder 1-7. In the attached example (Sheet1- Data), Welder 1 has 2 "CR" and 1 "LOF", this figures to be reflected in Sheet 2 (TOD).
View 2 RepliesI have data in the following type
A Criteria B
A Criteria C Criteria A
C Criteria C
D Criteria 1
2 Criteria 3
Criteria 2
3 Criteria
I need a formula that will count the number of unique values in column A that have "Criteria" in column B. In this case the desired output would be 5 (A, C, D, 2, and 3), a blank cell in column A does not need to be counted.
I'm trying to create a formula that tells me the following:
If the item is marked as closed (vs. active), then how many renewals/terminations replacements/etc are there? These are two difference columns in a worksheet.
I need to count the amount of Unique codes in column A BUT ONLY if they are still OPEN status. Hopefully the attached example will be explaination enough (I want to automate the RED figure...
View 3 Replies View RelatedI want to count the number of groups of 3 adjacent cells in a horizontal range (C5:EV5) in which any cell in the group of 3 has a value in it (as opposed to all the cells being blank or containing "0"). For example, if any or all of the cells in C5:E5 have a value in it, it would count as 1, and if any of the cells in the group F5:H5 have a value, it would also count as 1, and so on. Is there a way to use COUNTIF for this?
View 5 Replies View RelatedI am trying to add separate columns together to get a total count of a specific criteria. The formula I am using is:
View 3 Replies View RelatedAttached excel sheet below. Suggest a formula to get the count of items that fall in a specific data range ?
Count of items that specify a range criteria.xls‎
I have data that is added to every week. I need an equation to count how many times each employee show up each weekending.
View 3 Replies View RelatedI want to create a headcount per month for a monthly staffing spreadsheet.
I have an employee dept (A1), start date (B2), and end date (C2), and also record amount paid each month (D2, E2, F2).....
I have employee numbers in two ranges of cells where the employee number will have alpha and numeric (ASAZ002000). The first is a range of “target” employees we need to look at.(A4:A20). The second range will be all employees of the company that the target list needs to check in for the specific target employee(s).(G4:G25). If a “target” employee is found within the range of all (G4:G25) – highlight cell red (G4:G25). I have attached a small file that might explain it better.
View 2 Replies View RelatedI am trying to get the correct formula to count the number of days it has been for each employee since the last occurrence of an absence/tardy. For each employee, starting with the beginning of the year, we mark and employee as Absent as an "A" or Tardy as "T". See below the examples.
Employee Name
Date:
1/1
1/2
1/3
1/4
1/5
1/6
1/7
1/8
1/9
1/10
[code]....
We are keeping track so that employees have the ability to make up numbers because after so many occurrences they can become terminated. If an employee has about 60 days in a row without an infraction, that employee can deduct a day from their total on the year.
Also to include a vlookup so that I could have their name as well with the number of days on a separate tab!
Looking to have a macro call a subroutine every time it finds a cell meeting specific criteria.
Code in plain english would look like this:
For EACH cell in range A1:BZ500 meeting the following criteria:
Cell value is a date
AND
Cell's date is at least a week or more in the future
AND
Cell background (Fill) = RGB color code: (R:191 G:191 B:191)
DO the following:
Call repeatingsub
I have a table with 3 columns with an unkown number of rows (text, date, date) that is being imported daily.
I want to create a 4th column with dates starting from today and each subsequent row be one day earlier. I want to look at 30 previous days.
I then want to count the number of rows (looking at column 1-3) with the following criteria:
Countif column2<= "date in colum4" AND column3< "date in column4"
Here is what I have. 4 Worksheets. The first worksheet is a summary page. I have 350 personnel that are broken down into three different groups. So each group has it's own sheet. Here is what I need to accomplish. Results need to be posted on the summary sheet.
I need to compare cells B2 & D3 for each row on a worksheet and display the number of times they match on a worksheet. For example how many times does EP & EP match on a certain row. I need to compare cells B2 & D3 for each row on a worksheeet and display the number of times they don't match on a worksheet. For example how many times does EP & MP occur. I've attached an example for reference
ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales
23/6/2012 YES0NOÂ 33/5/2012NOÂ NOÂ 43/4/2012NOÂ NOÂ 53/3/2012 YES2NOÂ 63/2/2012NOÂ NOÂ 7 3/1/2012 YES1YES682/29/2012 YES0NOÂ 92/28/2012NOÂ NOÂ 102/27/2012 YES1NOÂ 112/26/2012 YES0NOÂ 122/25/2012NOÂ YES4
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
I have a spreadsheet which lists letters issued, the date issued and the potcode. I need a formula that counts, on a weekly basis, the number of letters issued to postcodes in Sutton and Bexley.
I have a count sheet set up on one worksheet and the list of postcodes applicable to each area are listed on another worksheet. I have been playing around with sumif, sumproduct etc, but these don't seem to work as I am pointing the formula to a list of postcodes and not an individual postcode. For example, the formula for one week needs to tell me, the number of letters issed to Sutton between 26/07/08 - 01/08/08. This is what I tried -
=SUMPRODUCT(('MU63 NC'!$F$2:$F$10>=COUNT!B$2)*('MU63 NC'!$F$2:$F$10<=COUNT!B$3)*('MU63 NC'!$D$2:$D$10=Sutton!$A$2:$A$50))
But I get #N/A - if I change the last refernce to a specific cell instead of a range it works, but this will make the process very lengthy as there are lots of postcodes!
I need a way to find a value in a column which has one or more corresponding values in an adjacent column. Then take all of the corresponding values found and count all occurrences of the found values in another column. But I only want to count the entries if an adjacent column is not blank.
Not the easiest thing to describe. Starting to wonder if I need to think in reverse. I hope the attached example makes more sense.
Book1.xlsx
I found these 2 examples online on how to count Mondays between 2 dates but neither seems to work on Excel 2003, which I am using. Can anyone help me please?
Number Of Mondays In Period
If you need to return the number of Mondays (or any other day) that occur within an interval between two dates, use the following Array Formula:
=SUM(IF(WEEKDAY(A2-1+ROW(INDIRECT("1:"&TRUNC(B2-A2)+1)))=C2,1,0))
This formula assumes the following:
A2 contains the beginning date of the interval
B2 contains the ending date of the interval
C2 contains the day-of-week number (1=Sunday, 2=Monday,...,7=Saturday) ....
How to be able to count cells with a specific color (green) and a specific value (8210) for example the sum of the info I am needing below should be 2 even though there are technically 3 - 8210 cells.
8260
8210
8210
8220
8220
8250
8240
8260
8250
8210
8280
I am trying to find a formula that will give me a word count in specific cells.
View 14 Replies View RelatedCELLS AA5:AA64 will have either EF, CS, SBS and/or, RP. Cell AA16 could be "EF / CS / SBS" and AA20 could be CS. I want Cell AA65 to count show how many CS's have been entered in that range. How would I do this.
View 3 Replies View RelatedI am trying to use a count if function for a specific word and a time range or number. so On Sheet 1 (called Raw Data) I want to check for the word annuity in Column H -
If it is present I want the formula to then check if the corresponding time in column C is within a specific hour.
HTML Code:Â
=COUNTIFS('Raw Data'!H:H,"Annuity",'Raw Data'!C:C, rng,">=19.00",'Raw Data'!C:C rng,"<20.00")
This is what I have so far.
How can I count the number of used columns in a specific row? The below code doesn't work.
View 14 Replies View RelatedHow would you be able to count all the used cells in a specific column?
I know the following would count all used cells in a worksheet but what about a specific column?
Having a large spreadsheet with Columns A to F filled with data.
I'm trying to create a formula that's count the unique value "Order no." (Coloumn F) but only the ones between certain Departments Column(H) a certain "Error type" in Column(J).
Here is the formula I am currently using:
=SUMPRODUCT((Sheet1!B19:E15235="Contact Sheet Available/Disc Sent")*(MONTH(Sheet1!H19:H15235)=MONTH(TODAY())))
This counts all entries with the status "Contact Sheet Available/Disc Sent" and that have a timestamp within the current month.
I need to alter this to count the last week in September and the first 3 weeks in october (using this month as an example and will have to have to be able to run without changing dates next month).
If i want to remove the row that has value lower than 2 in a particular column (in this pic it's column L).
this column come from a =counta formula to count how many 'x' on each row.
[URL]
i paste few rows below. the column i am talking about is highlighted as 'count' My data goes really long below, thus it's not effective to use filter option.
1
1
2
2
3
3
4
4
[code].....
I have a row of cells that contain a single letter: W,C,O.
I need to provide a count of the number of occurancies of each letter. So I have a cell that shows me the total W's, a cell showing me total C's and another showing total O's.
Whats easiest way to do this?
I know its not ideal, but on this occassion ive no desire to add and hide another column.
I have a worksheet with the following structure:
Column 1: Date (from 11/10/1996 - 31/12/2000)
Column 2 and onwards: Price (in numeric form, in which there are N/A records entered as text)
What I want to do is using VBA codes to find out how many "N/A" records appear in each month, and if there is more than 10 "N/A" records in a month, I would discard the months' record (set the records be -99).
I want code to count cells that contains only specific word like ( do)
View 4 Replies View Related