Is there an excel formula to count the formatted cells for each row?
Here an example;
Sheet2
A
B
C
D
E
F
G
H
I
J
K
1
EXAMPLE
COUNT
2
01 05 31 34
10 18 21 28
23 26 33 36
06 11 37 39
15 19 25 30
16 17 35 38
02 03 08 09
04 12 27 29
13 14 24 40
07 20 22 32
3
[Code] .........
How to count those that are formatted in RED or bold using Excel 2003 as I know in later versions that is possible but old ones I am unsure how to count them.
View 1 Replies View Relatedspread sheet that I need to do for work. Unfortunately I do not have excel on my home computer to be able to attach a spread sheet
The spreadsheet has one column (A) with a list of questions. The column next to this (B) has either a red or yellow cell in each row (a red cell would be a high risk to the business if the answer to the question in that row was no, and a yellow cell indicates a moderate risk to the business in the answer to the question in the row was no).
The third column (C) is conditionally formatted so if a 'y' was placed in any of the cells they would turn green. If 'n' is placed in any of the cells the cell would change to either red or yellow (this would depend on what the colour was in column B).
I need to know a formula to count cells by colour. So the number of red, yellow and green cells in column C would be counted automatically into a totals box for each colour at the bottom of the spreadsheet. I have tried some online suggestions but couldn't get these to work for cells that had been conditionally formatted. I'm not the most experienced person with spreadsheets (this time last week I couldn't add two cells together)
The final thing I need from the spreadsheet (and I'm not even sure if this is possible) is for a total box to be colour co-ordinated based on the number of red, yellow and green cells in column C. I would need the total box to be green if all column c is green, yellow if three or less cells in column C are yellow and red if any of the cells in column C are red or there are more than 3 yellow cells in column C.
Just wondering if it possible to sum cells that have been highlighted in yellow in an excel spreadsheet? I currently use Office 2007 and 2010.
View 4 Replies View RelatedI am trying to calculate the difference in time between two cells and if the difference is >= 8 Hours the result is 8 hours - 1 Hour if the result is less than 8 hours then the result stands. I have the following, but it returns 8 always.
The two cells are formatted as hh:mm
H6 = 06:30 & G6 = 14:30
=IF(((H6-G6)>=8),"((H6-G6)-1)","(H6-G6))")
I am trying to write some code that will loop through the workbook (selecting all cells formatted as currency), updating the cell value and rounding to 2 decimal places. The updated price must be rounded as these prices are used in calculations.
The prices are not in a contiguous range and are in different cells on each sheet, but all within the range (“B1:V200”)
I need the user to enter the required increase I,e 1.05 (5%) in Price update sheet, cell “F6”, then run the code from this sheet (which will be the only sheet I do not want to run the code on, which will be the active Sheet)
This is the code I have so far
I don’t know if it will work yet as it errors out (Type mismatch) on this line.
cell = cell.Value * Sheets("PriceUpdate").Range("F6").Value
Sub UpdatePrices2()
For Each Ws In ThisWorkbook.Worksheets
If Ws.Name ActiveSheet.Name Then
For Each cell In Ws.Range("B1:V200")
If cell.NumberFormat = "$#,##0.00" Then
cell = cell.Value * Sheets("PriceUpdate").Range("F6").Value
cell = WorksheetFunction.Round(cell, 2)
End If
Next cell
End If
Next Ws
End Sub
I'm trying to use the SUMCOLOR function found on your website to sum cells which have conditional formatting (background colors with bold writing) applied to them, but it doesn't work.
I'm attaching the code found on the website as a reference.
I read some content on Cpearson but it's way beyond my understanding.
Function SumColor(rColor As Range, rSumRange As Range)
''''''''''''''''''''''''''''''''''''''
'Written by Ozgrid Business Applications
'www.ozgrid.com
'Sums cells based on a specified fill color.
'''''''''''''''''''''''''''''''''''''''
Dim rCell As Range
Dim iCol As Integer
Dim vResult
iCol = rColor.Interior.ColorIndex
I currently have a spreadsheet that i am using to track invoice pages when I receive them. I have added a conditional format on the worksheet that turns the Date red when each invoice is due and i manually shade each cell grey when the invoice is received, however as i have many invoices due on the spreadsheet its a bit dificult to track all of them... i have been told that a VB code will help. (I am new to this)...
I want to put a Command button on the spreadsheet that will take me to the next cell that has the text highlighted as red and the background color is white i.e not shaded.
I am looking to produce a Macro to select conditionally formatted cell's from a worksheet, i got as far as selecting those cell's but i need it to only select cells that have been filled.
View 6 Replies View RelatedI have a series of conditionally formatted cells which turn the text in them to red if the value is less than 40. This works fine.
Occasionally however a value of less than 40 will need to be entered along with the letter 'v'.
ie. 39v
I'd still like this to be coloured red, but it's obviously coming out as black.
Is there a way to sort this out?
edited to add : Im actually using a separate cell to enter the value 40 (as the value can change).
I am trying to build an if statement to test variables that are in time format and then perform a calculation.
I was able to get an example working if I convert the start times to integers rather than time values. However, the data won't be provided to me as integers.
So, I need a nested if statement (using "and") that will test for two situations using cells in time format or I need to write a macro to convert the time data to integer format. I've been working on the former most of the day and have hit a brick wall.
I'm working with a big dataset and the dates come out in this way:
94WAO7t.png
EDIT: Example of book included
How do I write a bar chart which reads the format of a cell instead of the content? ie I want to count how many cells in each column are amber. Amber cells have already been decided by conditional formatting.
See demo attached : bar chart demo.xlsx‎
I am pretty new to VBA and have been wrecking my brain and reading just about every Thread there is on this and still can't figure out why I am not getting the code to work.
I am trying to get data from Column "Sale Price", stored in Table "MasterInventory" on worksheet "Master Inventory" to populate a textbox in a UserForm by means of Vlookup.
Upon running the code below I'm getting Value Error 1004, and during Debug when I hover over "MasterInventory" it shows "MasterInventory=Empty"
Also Im trying to figure out how to do it so I can call the "userform" up from any worksheet and add the entries in the table on worksheet (Jan, Feb, Mar, etc.) for the month depicted in the TextBox "Date" on the Userform
The code looks like this:
Private Sub CBx_PROD_AfterUpdate()
'lookup value in Col F [Sale Price] based on Product (Col A [Description] in Table [MasterInventory])
With TB_SP
If OB_Y.Value = True Then
Me.TB_SP.Value = Application.WorksheetFunction.VLookup(CBx_PROD.Value, MasterInventory, 6, False).Value
End If
If CBx_PROD.Value = "" Then
Exit Sub
End If
End With
End Sub
I know the VBA code to count cells from a data set that were manually colour-coded.
The problem is that the code (pasted below) doesn't seem to pick up cells that were coloured via Conditional Formatting. How do I do this? What is the VBA (if there is one)?
Function COLORCOUNT(varRange As Range, varColor As Range)
Dim cell As Range
For Each cell In varRange
If cell.Interior.ColorIndex = varColor.Interior.ColorIndex Then
COLORCOUNT = COLORCOUNT + 1
End If
Next
End Function
Is there any way of writing a macro so that specific cells are formatted to start with a capital letter and end with a full stop. Can you also write a macro to automatically spell check specific cells?
View 11 Replies View RelatedSay I have a worksheet that has a column in which every cell is formated in hh:mm:ss format. The column is probably 100 cells long...so from A2 to A101 (A1 is the title of the column). Now, we need to take the data in cells A2:A101 and graph it, but the data needs to be formatted in only seconds. So, in column B, we want to convert the data from column A into seconds format.
For example,
cell A2: 00:01:46
cell B2: 106
Of course, we can't convert each cell by hand, because this needs to be done on a lot of data...worksheets upon worksheets.
Is it possible to keep ending zeros in cells that are formatted for Text or General?
I have a column with numbers like the following: 264400
I need to format this number for three decimals so it will look like the following: 264.400
I need the column to be formatted for either Text or General. Currency breaks a system.
I have a spreadsheet where i do need to count cells values that are formatted as text but i do need to ignore the real text in some cells, in this formula i do need to add values depending of the adjacent cell.
I have attached a example : New Microsoft Excel Worksheet.xlsx‎
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
Column A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.
View 3 Replies View RelatedI want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.
View 4 Replies View RelatedABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales
23/6/2012 YES0NOÂ 33/5/2012NOÂ NOÂ 43/4/2012NOÂ NOÂ 53/3/2012 YES2NOÂ 63/2/2012NOÂ NOÂ 7 3/1/2012 YES1YES682/29/2012 YES0NOÂ 92/28/2012NOÂ NOÂ 102/27/2012 YES1NOÂ 112/26/2012 YES0NOÂ 122/25/2012NOÂ YES4
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
I'm a newbie to these forums, but I had a question that I couldn't find an answer to in the search feature. So, I joined and here I go....
I have a whole lotta data (nearly 600 "pages" of data) that I pasted into Excel. Unfortunately, it's formatted poorly and I'd like to make it nice and purty.
What I started to do was to create a 2nd sheet and then do an "=" and then click the spot with the 'group name' and then another "=" underneath it and then clicked the spot with the 'premium' info, etc.
After a couple of these, I figured that I could simply make a formula to help me out with it. Please see the attached screen captures for some detail on my issue.
Can someone help me create a formula or a way to count a certain cell and then 52 cells underneath it and display it?
I have spreadsheet with different 100s of columns of dates with 600 rows. The first row identifies which zone the data belongs to (North, South, East, West. NE, SW, SW1, etc...)
I want to write a formula to check how many dates in each column fall in 2015 or later years; This can be accomplished by writing a countifs formula.
Where it gets complicated is once i filter on the Zones;
I want the formula to give me the desired result - count of all CELLS where the year is 2015 or greater - WITH FILTERS ON.
I stumbled upon following sumproduct formula that gives count for visible cells, however when i apply the date criteria, i get incorrect result -
=SUMPRODUCT(SUBTOTAL(3,OFFSET(IJ3:IJ999,ROW(IJ3:IJ999)-MIN(ROW(IJ1:IJ999)),,1))*(IJ3:IJ999>DATE(2014,12,31)))
I have this formula which is counting the number of cells in a column that fall within each calender month.
However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.
In my workbook, B/C:133 have a formula =""
I will need the formula in column E to work if there is a formula that yields a "" in column B and C.
How do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies View RelatedI used Sheets(1).Cells(1, 1).Rows.End(xlUp).Count instead of UsedRange.Rows.Count in this code , but it didn't succed with me. Why and how to do that
Dim i As Long, j As Long
j = 1
For i = 1 To UsedRange.Rows.Count
Sheets(2).Cells(j, "a").Value = Sheets(1).Cells(i, "a").Value
Sheets(2).Cells(j, "b").Value = Sheets(1).Cells(i, "b").Value
Sheets(2).Cells(j, "c").Value = Sheets(1).Cells(i, "c").Value
j = j + 1
Next i
End Sub
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I have the following data in 1 of the tabs.
[TABLE]
ClassSequenceAB
10SE132422
20SE23212
20SE321
20SE23425
10SE332455
15SE132412
10SE234
[/TABLE]
I want a unique count of sequences in a different for that class only if that particular row in 'A' or 'B' is populated. The result set should be as follows:
[TABLE]
ClassAB
1032
1511
2012
[/TABLE]
Can this be achieved through a formula?