Find Range Of Cells Using A Criteria
Dec 27, 2008
I have a Range of cells in 1 column..E.g. Below
A
B
B
B
A
A
B
B
A
It continues on to a few 100k. Now I have a criteria which i will use to search for my range of cells.
Criteria e.g.
A
A
B
B
So i want to search for this particular pattern in my Long list of cells and locate the exact location of the pattern i specify. How can i Do this in Excel.
View 6 Replies
ADVERTISEMENT
Mar 28, 2012
I am struggling with a INDEX,MATCH and MAX formula. I am trying to retrieve values from column E with two criteria:
1. That the value in column C is equal to a lookup value
2. That the date in column A is the closest before date for a lookup date
I have attached an example file.
View 5 Replies
View Related
Nov 14, 2006
I want to read information from the "Mapping" sheet, then find information in the "GLEX" sheet that correspond to the read information, then copy the information that was found in "GLEX" to the "Calc" sheet and add it all together and display the sum in a particular cell in the "Report" sheet.
The "Mapping" sheet is a mapping of information to show what makes up a particular total and where it must be entered in the "Report" sheet. The "GLEX" sheet is the output from a financial system and the source of the information that must be "reformatted" to the "Report" sheet. The information is only an extract as the whole totals to around 10MB. I have also deleted the "Report" sheet as it is fairly big on it's own, but the principal will be the same, I think. (If i should upload the "Report" sheet,)
Step 1:
"Column A" and "Column B" of "Mapping" are the starting points. The macro must read the values in "Mapping" "Column A" and "Column B" and remember them. Then it must find the row in "GLEX" "Column A" where the information from "Mapping" "Column A" matches and where the information from "Mapping" "Column B" matches with the information from "GLEX" "Column E".
Step 2:......................
View 5 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Oct 10, 2009
I'm trying to make a by month spreadsheet that has all twelve month ranges starting in for a3. in a3 it would have the start date and in a4 it would have the end date. I'm trying to locate all of the dates between those two dates and pull in the profit ammounts from another sheet, the results would be in row 5. I would also like to pull in the loss amounts and have them in row 6. All corresponding with the date range in rows 3 and 4.
View 9 Replies
View Related
Feb 1, 2010
I'm working on a project for my company. We make plastic tanks and for quality control we want to start recording the thickness of the tanks in different areas/zones of each tank.
Attached to this message is an Excel sheet that I've been working on. From "Sheet 1", it records inputted thicknesses into WorkSheet "1098". On the top of "1098", it shows all of the recordings, and just below that are the "10 Most Recent Entries".
Right below the "10 Most Recent Entries", there are formulas to calculate the Min and Max Values. Whenever a new entry is recorded, the selected cells for the Min and Max formulas change. Is there a way to force the cells to always stay the same?
View 3 Replies
View Related
Apr 24, 2014
i have the following code, what it does is, it locate those empty cells in column M and insert the formula "=TODAY()". What i need the code to do is only insert to the empty cells in column M if there is a value(as long as is not empty) in the reference cell of column E.
VB:
VB:
Private Sub CommandButton3_Click()
Dim wks As Worksheet
Dim rng As Range
[Code].....
View 7 Replies
View Related
Sep 27, 2013
I have the following data
Country
Aug-13
Sep-13
Oct-13
Nov-13
UK
3
5
3
2
USA
10
14
16
13
France
1
5
7
9
What I would like to do is sum a specific range of this data based on three criteria. Each criteria is in its own cell.
- Start Date
- End Date
- Country
So if I wanted to sum from 'Sep-13' to 'Nov-13' for 'USA', the formula would give me the answer 43.
View 4 Replies
View Related
Jul 3, 2009
I want to sum all cells in column A that have one of several tags in an adjacent cell in column B.
- Some of the rows in column A are not tagged
- There are currently 3 tags that are valid in column B (I, S, R), but this could increase (or reduce) in the future, say to I, S, R, E
- The possible tags are contained in a named range, but don't have to be
- It's not possible to restructure the data because the columns are in a scratch sheet, where a variety of calculations are created on the fly in the column. I've attached an example, which might make it clear
- There are several (up to 10) sheets like this in the workbook with lots of different calculations that are then summarised in to some analysis.
- The overall objective of the workbook is to be able to;
a) include/ exclude individual calcs for any one column
b) include/exclude a country - solved
View 3 Replies
View Related
Jan 9, 2014
Copy and paste each cell below when M is true or greater then 0 to a new worksheet called Price Summary. If cell is false or 0, do not copy. I would like the text in N to paste to the first available row in A and copy M as well to the corresponding B. I only need the values of these cells to copy and not the formulas. Been trying to get this to work for a while with no luck.
Excel 2007MN17$018$01920$021$022$023$024$025$026$027$028$029$030$031$032$033$034$0250# Vessel Pricing TESTWorksheet FormulasCellFormulaM17=IF(L17=TRUE,INDEX(_250lb12inlegs,B2),"$0")N17=IF(L17,"12 in.
[Code].....
View 3 Replies
View Related
Sep 5, 2006
got a problem with a little piece of code witch need to check something and if its true then its has to do 1 and they i need another if... just look at the code :P
Sub Bevestig3()
Dim Msg, Style, Title, Help, Ctxt, Nadenken, bevestigmsg, MyString
Msg = "Heeft u alles goed ingevuld?" ' Definieert bericht.
Style = vbYesNo + vbDefaultButton2 ' Definieert knoppen.
Title = "Doorgaan?" ' Definieert titel.
Help = "DEMO.HLP" ' Definieert Help-bestand.
Ctxt = 1000 ' Definieert onderwerp
Nadenken = "test"
ActiveSheet. Unprotect Password:=Nadenken
bevestigmsg = MsgBox(Msg, Style, Title, Help, Ctxt)
If bevestigmsg = vbYes Then...................
View 8 Replies
View Related
Jul 24, 2014
I want to count the number of groups of 3 adjacent cells in a horizontal range (C5:EV5) in which any cell in the group of 3 has a value in it (as opposed to all the cells being blank or containing "0"). For example, if any or all of the cells in C5:E5 have a value in it, it would count as 1, and if any of the cells in the group F5:H5 have a value, it would also count as 1, and so on. Is there a way to use COUNTIF for this?
View 5 Replies
View Related
Apr 1, 2014
I will have a list of unique values. For each unique value, there is an indicator that tells me how many lines of information I need. Based on that criteria, I need a macro to insert that many rows and populate it with text. This will ultimately become a look up table that I will just use index/match function to populate.
I've attached a sample sheet. I'm not sure if I need a macro to insert rows or a macro to paste a copied range. Or maybe I need a mixture of both with a formula to calculate the number of cells I need?
View 9 Replies
View Related
May 20, 2013
Is there a way I can sum the result of a formula on a range of cells that meet a criteria? For example, I need to sum the difference of only the cells that are >46. (a1-46)+(b1-46)+(c1-46)...+(g1-46).
In this case the result I'm looking for is on row 2:
Is this possible to calculate in 1 cell only (h1)?
A
B
C
D
E
F
G
H
1
44.2
48.6
47.5
0.0
42.3
44.6
49.5
??
2
2.6
1.5
3.5
7.6
View 3 Replies
View Related
May 29, 2013
I have the following table
Team>
Team A
Team A
[Code].....
I need to fill the following table in another sheet counting the amount of Blank cell there are according to Month, Team and if the name row is filled. I have tried Sumifs, sumproduct,countblank typing them in as arrays but don't seem to be getting anywhere
April
May
Team A
6
1
Team B
11
1
View 2 Replies
View Related
Nov 16, 2007
I'm trying to do is loop through a range of cells, and if the cell meets a condition I want to move it and 2 cells to the right of it left by one cell.
Sub MoveRangeOfCellsBasedOnCellCriteria()
Dim myrange, cell As Range
Set myrange = ActiveSheet.Range("H2", Range("H65536").End(xlUp))
For Each cell In myrange
If IsNumeric(Left(cell.Value, 1)) _
Or Left(cell.Value, 5) = "UNIT " _
Or Left(cell.Value, 4) = "THE " _
Or Left(cell.Value, 5) = "FLAT " Then
Else
cell.Range("A1:C1").Select
Selection.Cut
cell.Offset(0, -1).Range("A1").Select
ActiveSheet.Paste
cell.Offset(1, 1).Range("A1").Select
End If
Next cell
End Sub
View 7 Replies
View Related
May 24, 2008
In a data table, I need to sequence down a criteria list in Autofilter to the end. The list contains may contain either numberic or string dat, but no blanks. At each criterion, I need to copy the range and paste to another workbook. After reviewing many posts, I beleive I can create a VBA macro to do everything except sequencing.
View 2 Replies
View Related
Nov 30, 2007
I am trying to find number of cells in a range.
I tried:
=COUNTIF(U97:U103,AND(">"&5,"<"&8))
and assumed it will count the 6 and 7's.
It always results with 0.
View 10 Replies
View Related
Feb 19, 2009
i have this file with macro. But it doesnt works how i want. I need all data exctly in forms as are. So it can not will be changed. I hope it will be works, if i define my macro other.
I find actual day in column C where are dates. But now it find only if is there value like now(). In this file it found cell D24, but i need, that it will find cell C24. I need search only actual day in column C.
View 5 Replies
View Related
Jan 4, 2014
I am looking to Find and Replace (via ctr-F) but I need to replace it only within a range of selected cells. Each time I try to do this it replaces everything even though I have tried selecting each cell and replacing only that. Is there a way to select a certain amount of cells and replace?
View 2 Replies
View Related
May 14, 2012
I have one excel sheet. In the first column there are various Project Codes and in the first row there are various date. Cells in the matrix contains 0 or 1 value. If value is equals to 1 that means the project was on hold during this months and if the cell value is null of 0 (Zero) it means the project was active. For a project in a particular row there are several times a project went on hold and now I want a date range showing the project's hold duration. If project went on hold more than one time the result should also give different range for each time when project went on hold.
follow the link to view the excel file.
http://www.excelforum.com/attachment...3&d=1336994800
[IMG]http://www.mrexcel.com/forum/data:image/png;base64,
iVBORw0KGgoAAAANSUhEUgAABAAAAAMACAIAAAA12IJaAAAgAElEQVR4nOy9e3gT153/P99fd7vd77fxV+3udtO06fr3PL
[code].....
View 8 Replies
View Related
May 8, 2008
I would like to be able to replace all cell values in a range of 20c by 20r (i.e. 400 cells). In all cases the condition would be the same (find all cells with a value greater than than zero), but then replace with different values.
e.g. Cells with value >0 in range CX119:DQ138 replace with "NT", then cells with value of >0 in range DR119:EK138 replace with "NU"
I thought you could do it with find and replace by just selecting that range of cells but can't see how to set the conditional >0 bit.
View 9 Replies
View Related
Sep 10, 2008
I have 26 ranges defined on my worksheet sheet3. Each range is 10 rows high and 4 columns wide. On my sheet1, I'd like to be able to go automatically to a specific range on sheet3 (I need to provide the choice to go to any of the 26 ranges), selected perhaps by a combobox. The ranges are building occupancy groups like A1, A2, B, E, R1, R2, etc. (26 of them). Then I'd like the user to look at each row in that particular range, select one, and then have the four values in that row placed in corresponding cells on sheet1.
I have this set up now using a four column combobox, and it works just like I want, except that only the first column of data is displayed after a row is selected. If I could get those four cells of data as they appear in the combobox inserted on sheet1, I'd be fine. But I can't. So I'm looking for a work-around. Basically, my goal is to get a specific row of data (4 cells wide) from my named ranges copied into cells on sheet1. But I need to be able to get to the correct range automatically.
View 9 Replies
View Related
Aug 18, 2008
I am having a hard time creating a code that would search the exact string in a cell. See sample scenario below.
1. I have a string "hello" to be searched.
2. I will search the whole string in each cell in a previously declared range.
3. If in a cell i found "kdhlsk hellodsiewjls", although "hello" string is there,
the code should still return 0.
4. But if in a cell, i found "kjdsfel ljsdlkue hello luoeww", then the code should return 1.
I have already created a code, but it will always return 1 in step#3.
View 9 Replies
View Related
Mar 23, 2007
I am using Excel 2003. I have a range that I have defined in my sheet called "March". Within this sheet, I have a range name called "ACCOUNTRANGE". Basically it comprises the column B10:B200. Within this range, I may be inserting rows so range is dynamic. Well one of my problems is finding BLANK Entries in my range. How do I loop through the range to find BLANK entries and prompt the user that a BLANK entry was found, then it stops the loop and if none is found, nothing happens and continues on.
View 3 Replies
View Related
Jan 29, 2014
I want to create a macro that will find a text string called "Season Average" in the entire workbook and delete a range of cells above it 4 cells longs starting right above the text and then going left.
Example is if "Season Average" is in cell D11, than I want the cells D10, C10, B10 & A10 Deleted and the cells to shift up
This happens throughout the entire workbook and multiple times on each work sheet in different spots not consistently same cells.
View 9 Replies
View Related
Feb 11, 2013
How to find out the number of cells in a range containing dates less than a specified date.
View 4 Replies
View Related
Jun 10, 2013
I want to find the total number of times the number 1 appears in cells B2 to B33.
In each cell I have codes such as 4919409382a, 5021193035v and so on.
I have tried =COUNTIF(B2:B33,"1") but just get 0 returned.
View 3 Replies
View Related
Jun 9, 2006
I'm trying to find the max value in range of cells that hold text equivalents?
e.g. cells contain 001, 002, 003, 004.
therefore max value is 004
Dim lMaxVal As Long
lMaxVal = Application.WorksheetFunction.Max(Val(rangeHazRoomNum))
View 3 Replies
View Related
Apr 3, 2014
Code is trying to
1. Where there is data in column B
2. Goto first row of data
2. If column J = "Closed"
3. then select Cells from column B to J in that row and colour these cells in red
4. If column J= "Open"
5. the select Celss from column B to J in that row and colour these cells in grey
4. Repeat for next row until you get to cell in column B where there is no data.
Recieve run time error 1004: Method 'RAnge of object_GLobal failed
===============================================================
Sub Colourclosed()
Sheets("Risks").Select
Dim LastRow As Long
Dim i As Long
LastRow = Range("B" & Rows.Count).End(xlUp).Row
For i = 8 To LastRow
If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select
Selection.Interior.ColorIndex = 3
[code].....
Note: I've managed to do it for one cell ie for Column B by replacing "If Range("J" & i).Value = "Closed" Then Range("B", "J" & i).Select with "If Range("J" & i).Value = "Closed" Then Range("B" & i).Select" This works but only colours in cell in column B, how do i do this so it colours range of cells
View 4 Replies
View Related