Find String In A Sheet Or From Different Tables?
Jun 5, 2014
write a simple formula to find a string in sheet2 and Return (True or False) in Sheet1.
The following is what I have written..
If I find a string matched - Then True.
=IF( OR(COUNTIFS(Escalations18[Engineer], "Arun C"), COUNTIFS(Table2517[Engineer], "Arun C"), COUNTIFS('Week 1'!D56:D61, "Arun C") ), "True", "False")
I even used vlookup, but getting error.
=vlookup("Arun", Column B, 3, TRUE)
2nd solution:I want to copy the same to other columns.. But should search for some other name.
View 2 Replies
ADVERTISEMENT
Jul 8, 2014
I am trying to take the tables you will see in the dummy page on the second and third sheet and have them output onto the first sheet based on the parameters of the drop down menus. Is there a way to have a button on the first page that controls a macro to do this?
View 4 Replies
View Related
Aug 22, 2013
i am trying to correspond 3 columns like:
Code:
________________________________________________________________________
points from / points to / note defined / points pupil got / his note
------------------------------------------------------------------------------------------------------------------------------
0 10 4 33 #
11 20 3 16 #
21 30 2 25 #
31 40 1 07 #
-------------------------------------------------------------------------------------------------------------------------------
Column 5 (his note) must be calculated looking at value on column 4 (points pupil got) and finding it on the intervals given by columns 1 and 2 (points from/to), and finally ascribing the value from column 3 (note defined).
View 2 Replies
View Related
Aug 14, 2008
I have two lists (List A and List B) of hundreds of items that reside in a single worksheet.
Some items may or may not occur in both lists.
Every item in both lists has a value on the range of 1-50.
I am only interested in those items that occur in both lists.
I need to find the difference of the values for each of these items (List A - List B), including negative values.
I have tried many variations of formulas using VLOOKUP with no luck.
I cannot figure out how to accomplish this with a Pivot Table.
I want to make a macro for this.
Here's an example:
List A
W 29
X 11
Y 13
Z 4
List B
V 8
W 10
Y 30
Z 6
Where the results would be:
W = 19
Y = -17
Z = -2
View 9 Replies
View Related
May 23, 2006
I am having trouble getting my IF statement to test if the cell contains the text "sale" return "X" if not "Y". I need it to search through the text string in that cell and find a certain word, and if it finds that word, retrn a value. I am really having difficulty with is what symbol or function do I use for the logical test? (i.e. =, <>, MATCH, INDEX?)
View 4 Replies
View Related
Feb 25, 2014
I'm running Microsoft Office 2007.
I have 2 separate tables.. both a list of contacts of sorts.
In one table I have a list of all my clients (table A), in the other I have a list of "preferred" clients (table B).
The contact details etc that are stored in table A are more comprehensive to those in table B.
Effectively, I want to search for all of my preferred contacts from table B and filter for them in table A.
Then ideally I will sort alphabetically and just cut and paste the details into my preferred client spreadsheet.
I had a look online and there was something about creating a "relationship" but I don't think excel 2007 allowed me to do it. I certainly hadn't heard of powerview or powerpivot that they were using!
View 6 Replies
View Related
Oct 8, 2006
I have a in field column M of my table that gives the week number of various dates within the table.
I would like to find the high value reached during each week based on the Highs which are located in column P, the highs consist if workdays during each week number.
I would like this to appear as a new calculated field entitled "Week High", I am assuming I need to input a custom formula to do this. I also want to create calculated fields for the the high reached during each year, the year is in column L
View 5 Replies
View Related
Aug 7, 2013
I am using Excel 2010. I am digging through a workbook with 80-some worksheets. There is one worksheet with 11 data tables. When the workbook refreshes, there is a note at the bottom saying something about 21 data tables. I am not sure where the other 10 are. In an online post, someone said that the Name Manager should show them. But in Name Manager, when I filter on Tables, the list goes blank, and all the icons are the same for the other named ranges. Is there another way to find the data tables?
View 9 Replies
View Related
Aug 21, 2006
As in attached file, I have 5 tables:
Table 1: matrix that contains Weight data in each cell
Table 2: matrix that contains Code data in each cell
Table 3: Relationship between Code and Level data
Table 4: Table with relationship between Weight data, Code data and Level data
Table 5: I want to populate each cell in Table 5 matrix from getting values from Table 4 by looking up the right value from Table 5 based on :
1) Weight data from corresponding cell in Table 1
2) Code data from corresponding cell in Table 2
3) Code and Level relationship.
for e.g. to get value for Table 5, Worksheet cell B140 ( intersection of A1-A1),
1) corresponding weight is 1.17 as in Table 1 (Weight data) (Worksheet cell B3)
2) corresponding Code is 6 as in Table 2 (Code data) (Worksheet cell B35)
3) Code 6 corresponds to Level 2 (as seen in Table 3)(Worksheet cell A74)
so, looking up the 3 values from Table 4 i.e. Level 2, Code 6, Weight 1.17, one gets cell AR98 with corresponding value. therefore, final value in Table 5, Worksheet cell B140 (intersection of A1-A1) will be equal to $4.00
I have been trying to solve this using Vlookup, Hlookup, Index/Match but am getting confused. Also, not too sure if this can be done in 1 step. New to these excel and these functions
View 2 Replies
View Related
Jun 7, 2007
Referring to the post Find Min Value In Multiple Columns And Match The Header. I would like to go little bit further and see is there a way to find and match not just in multiple columns but in multiple tables (see the example)
View 4 Replies
View Related
May 11, 2014
How do you reference a table on another sheet so that when you sort that original table it doesn't change the reference you made on that other sheet.
i know how to do this when i am referencing a cell. for instance if i am referencing a cell on sheet 5 and that comes out to something like =Sheet5!B2, i know that when i sort the data differently in sheet 5, that reference will know to change to =Sheet5!B18 or where ever that original reference ends up in this new sorting. but if I do =Table5[2] or something, and i sort that table differently, the reference will change to the new data in that cell and will not follow old reference through the new sort.
View 1 Replies
View Related
Nov 17, 2009
is it possible to put the validation tables on a second sheet? I have several cells that have drill down lists, is it possible to put these lists on a second sheet?
View 2 Replies
View Related
Mar 31, 2014
I am trying to do a sort of index match thing using VBA. What I am attempting to do is to use the prefix of a long number and try to find that exact prefix in a string array, and output that string array value. So this is what I have so far as a test:
[Code].....
So I can match the text exactly so if I put PREFIXB in cell A1 in this example, i will get the msg box saying "YES", but if I make it PREFIXB1231k4j3jj1kj32cj, it will display "NO". I want to get it so that PREFIXB will be displayed in the cell that I put the formula in. So if A1 = "PREFIX1AAA100CF" and cell B1 = "=ABC(A1)", cell B1 will display "PREFIX1AAA".
Now the thing is that these prefixes can have different lengths, but will never encompass the exact prefix of another. So if I had a prefix of: PRE1AB, I won't have a prefix of PRE1A.
View 2 Replies
View Related
Feb 26, 2013
When using
VB :ActiveSheet.QueryTables.Add
How would you get the code to overwrite whatever is in the worksheet as opposed to adding new columns?
View 1 Replies
View Related
Jun 9, 2014
I have an excel file that contains around 8 sheets, each have a table that contains data. I want 2 master sheets that can automatically update itself if i enter data in any 1 of the 8 sheets.
master sheet 1 = summarized sheet that contains lesser columns with only major details.
master sheet 2 = contains all columns of all the 8 sheets.
the 8 sheets have unique names and i want those names to be in a drop down list in master sheet (summarized ) so i can select which ever sheet i want summary from.
Also i used tables for filtering data as i find it easier to track records from filter.
View 2 Replies
View Related
Oct 22, 2013
I want to take the values in Column U, attach the names in Column A, and rank from Highest to Lowest
Then I want to do the same with Column V/Column A
And then again with Column W/Column A
And then create 3 tables within the document that display the top 5 in each category.
It's already done, but by hand. Is there a way to automatically set this up?
See A27-A32 for what I want done automatically
View 14 Replies
View Related
Jan 29, 2012
I have one sheet with 25 tables in it, And i want to extract the whole row from this sheet to another sheet based on values ( Office1, Office2, Office3, Office4 ) if appeared in thrid column "C".
- the 25 tables created on the 1st sheet to be in the other sheets as formatted as well.
- once "Office1" appeared in the original sheet in the 1st table, Action : copy the whole row to sheet named "Office1"at the top row in the first table.
- once "office1" appeared again in the original sheet in the 1st table, Action: copy the whole row to sheet named "Office1"at the 2nd top row in the first table.
- once "office1" appeared again in the original sheet in the 2nd table, Action: copy the whole row to sheet named "Office1"at the top row in the 2nd table.
- and so on, the same with other 3 remains sheet.
View 5 Replies
View Related
May 27, 2014
I have a portfolio of 23 funds and I need to calculate IRR for each one every month.
The problem is that I have dispersed information for each fund.
For instance in sheet CashCallsBD I have a table with the funds cash calls. This table has a first column with the Fund Name then other column with the cash call date, another column with the cash call value. This table may have other columns. One fund may have several cash calls.
In sheet DividendosBD there is a table with some columns that refer to cash distribution movements. The main columns relevant for this case are Fund Name, Date and finally Cash Distribution (signed in red in the attached document)
And then my problem: In order to calculate IRR for each fund I need to create a table (for each fund) that merges and sorts the information of CashCallsBD, Dividendos BD and present market value for each fund and then apply the XIRR function. For each fund this sorted table would have at least 2 columns (date and values).
View 3 Replies
View Related
Mar 24, 2013
many times i am confrunted with excel files containing one sheet that has many tables on it. i need to print each table so that it fits on one page, but these tables are not formatted so that they fit, therefore i need a fast way to make each table fit on 1 printed page, no matter how big it is or how it is centered on the page size from page layout(many times the table is bigger than the page layout size). i tried selecting each table holding down ctrl and then hitting set print area, but most of the times this doesnt work, i still get part of the first table and the begining of the second table on the second printed page and so on, which is not good.
View 9 Replies
View Related
Sep 10, 2013
I have a data set that is defined as a table (Ctrl + T). There are formulas so I locked those cells and Protected the sheet. If I am at the bottom right cell, and press Tab to add a new row, I get an error message: "Cannot use this table functionality on a protected sheet"
I really need to protect the cells with formulas so that the are not accidentally deleted. But I also want to retain the Table format.
Is there a way around this without using VBA?
View 1 Replies
View Related
Jul 1, 2013
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code:
Sub Auto_Open()
'
Dim sht As Worksheet
If Range("A1") = 1 Then
[Code].....
View 2 Replies
View Related
Apr 16, 2012
How to write a code to import all tables from a single word document into a single excel sheet? (we don't know exactly how many tables there will be,or how many rows in a table there will be , but the columns are certain, which is 9, from A to I.
View 4 Replies
View Related
Feb 11, 2014
I have 7 sheets including the table as you can see on the attached. Now, each sheet is allocated to individual items e.g. item 10, item 20 and so on. I can't figure out how to return all the Item 10, 20, 30 ... to the corresponding sheet. It says Item 40 to all sheets.
View 8 Replies
View Related
Mar 27, 2014
I am trying to look up a numerical value in Sheet 1 Cell:F7 and find that value in Sheet 2 Column B, then offset 29 columns in the row where the value was found. The number will not have any duplicates within Sheet 2.
View 8 Replies
View Related
Mar 24, 2013
find the first numerical in a text string that is immediately followed by an x
so that i can extract the packing size from packing description workbook attached
DESCRIPTION
PACKING SIZE
SUNFLOWER OIL 12X1LT
12X1LT
[Code].....
View 5 Replies
View Related
May 6, 2014
i am trying to find country name in cell consisting of sting, i applied "=INDEX(K2:X2,MATCH(TRUE,INDEX(ISNUMBER(SEARCH(K2:X2,A2)),0),0))" this formula i am getting desired result but i am not able to apply ctrl+d since all cell reference are iterating.
View 8 Replies
View Related
Jan 31, 2008
I would like to call up a find box, then be able to search several worksheets for a string, to copy and paste the related row to a new worksheet.
I've gotten as far as being able to search for a string and get the row pasted, as long as the string is defined in my macro. Is there a way though to be able to call up a find box first though, and search for the input variable? (alternatively, I can only imagine a separate piece of code for each variable, of which there are many, and I am actually trying to save time.
View 14 Replies
View Related
Jun 16, 2009
The following line finds last "non-blank" row in a column. I have a column that has formulas in 10000 rows. Most of the time only first 7000 rows will have data, other cells below will have "". I need to find the last row with real data, not "".
Is there a way to add a condition or check to the following line?
View 6 Replies
View Related
Aug 2, 2009
1) Find strings "CA", "Ca", "ca", "California", "california", "cali", "Cali" in Column F
2) If the string is found, then record the Real value at Column D of that row in Column I
3) Continue this until there are no more strings in Column F
4) Add the values recorded in Column I and display the final value at the bottom of the list.
View 2 Replies
View Related
Feb 3, 2006
say I have a string that looks like this
C:Documents and Settingsme[test 2-2006.xls]Sheet1
I want to extract the DATE prior to .xls. I can get to this:
C:Documents and Settingsme[test 2-2006
It is possible that the filename would have numbers in it prior to the date.
I'm trying to figure out a way to get to the last SPACE in the string.
View 13 Replies
View Related
