Put The Validation Tables On A Second Sheet
Nov 17, 2009is it possible to put the validation tables on a second sheet? I have several cells that have drill down lists, is it possible to put these lists on a second sheet?
View 2 Repliesis it possible to put the validation tables on a second sheet? I have several cells that have drill down lists, is it possible to put these lists on a second sheet?
View 2 RepliesI have validation tables in a few cells. I've unlocked them and password protected the sheet so that they couldn't be changed other than what is in the list.
What's happening is that the list is there, but the cell is also allowing an entry that is not in the drop down.
How can I protect the cell to only allow the validation list?
My Table has a data validation list in one row of a table. And different formulas in different rows.
The Table is expanded only into columns. Which means, there will be no new rows...only columns will be added.
If we enter text into the header cell in a new column, the whole new column gets formatted, but the list and formulas do not auto fill into new columns.
Of course an easy way is to copy and paste a column...but is there a way to auto fill lists and formulas into columns of the table? Similar to how the rows get autofilled?
I am trying to take the tables you will see in the dummy page on the second and third sheet and have them output onto the first sheet based on the parameters of the drop down menus. Is there a way to have a button on the first page that controls a macro to do this?
View 4 Replies View RelatedHow do you reference a table on another sheet so that when you sort that original table it doesn't change the reference you made on that other sheet.
i know how to do this when i am referencing a cell. for instance if i am referencing a cell on sheet 5 and that comes out to something like =Sheet5!B2, i know that when i sort the data differently in sheet 5, that reference will know to change to =Sheet5!B18 or where ever that original reference ends up in this new sorting. but if I do =Table5[2] or something, and i sort that table differently, the reference will change to the new data in that cell and will not follow old reference through the new sort.
write a simple formula to find a string in sheet2 and Return (True or False) in Sheet1.
The following is what I have written..
If I find a string matched - Then True.
=IF( OR(COUNTIFS(Escalations18[Engineer], "Arun C"), COUNTIFS(Table2517[Engineer], "Arun C"), COUNTIFS('Week 1'!D56:D61, "Arun C") ), "True", "False")
I even used vlookup, but getting error.
=vlookup("Arun", Column B, 3, TRUE)
2nd solution:I want to copy the same to other columns.. But should search for some other name.
When using
VB :ActiveSheet.QueryTables.Add
How would you get the code to overwrite whatever is in the worksheet as opposed to adding new columns?
I have an excel file that contains around 8 sheets, each have a table that contains data. I want 2 master sheets that can automatically update itself if i enter data in any 1 of the 8 sheets.
master sheet 1 = summarized sheet that contains lesser columns with only major details.
master sheet 2 = contains all columns of all the 8 sheets.
the 8 sheets have unique names and i want those names to be in a drop down list in master sheet (summarized ) so i can select which ever sheet i want summary from.
Also i used tables for filtering data as i find it easier to track records from filter.
I want to take the values in Column U, attach the names in Column A, and rank from Highest to Lowest
Then I want to do the same with Column V/Column A
And then again with Column W/Column A
And then create 3 tables within the document that display the top 5 in each category.
It's already done, but by hand. Is there a way to automatically set this up?
See A27-A32 for what I want done automatically
I have one sheet with 25 tables in it, And i want to extract the whole row from this sheet to another sheet based on values ( Office1, Office2, Office3, Office4 ) if appeared in thrid column "C".
- the 25 tables created on the 1st sheet to be in the other sheets as formatted as well.
- once "Office1" appeared in the original sheet in the 1st table, Action : copy the whole row to sheet named "Office1"at the top row in the first table.
- once "office1" appeared again in the original sheet in the 1st table, Action: copy the whole row to sheet named "Office1"at the 2nd top row in the first table.
- once "office1" appeared again in the original sheet in the 2nd table, Action: copy the whole row to sheet named "Office1"at the top row in the 2nd table.
- and so on, the same with other 3 remains sheet.
I have a portfolio of 23 funds and I need to calculate IRR for each one every month.
The problem is that I have dispersed information for each fund.
For instance in sheet CashCallsBD I have a table with the funds cash calls. This table has a first column with the Fund Name then other column with the cash call date, another column with the cash call value. This table may have other columns. One fund may have several cash calls.
In sheet DividendosBD there is a table with some columns that refer to cash distribution movements. The main columns relevant for this case are Fund Name, Date and finally Cash Distribution (signed in red in the attached document)
And then my problem: In order to calculate IRR for each fund I need to create a table (for each fund) that merges and sorts the information of CashCallsBD, Dividendos BD and present market value for each fund and then apply the XIRR function. For each fund this sorted table would have at least 2 columns (date and values).
many times i am confrunted with excel files containing one sheet that has many tables on it. i need to print each table so that it fits on one page, but these tables are not formatted so that they fit, therefore i need a fast way to make each table fit on 1 printed page, no matter how big it is or how it is centered on the page size from page layout(many times the table is bigger than the page layout size). i tried selecting each table holding down ctrl and then hitting set print area, but most of the times this doesnt work, i still get part of the first table and the begining of the second table on the second printed page and so on, which is not good.
View 9 Replies View RelatedI have a data set that is defined as a table (Ctrl + T). There are formulas so I locked those cells and Protected the sheet. If I am at the bottom right cell, and press Tab to add a new row, I get an error message: "Cannot use this table functionality on a protected sheet"
I really need to protect the cells with formulas so that the are not accidentally deleted. But I also want to retain the Table format.
Is there a way around this without using VBA?
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code:
Sub Auto_Open()
'
Dim sht As Worksheet
If Range("A1") = 1 Then
[Code].....
How to write a code to import all tables from a single word document into a single excel sheet? (we don't know exactly how many tables there will be,or how many rows in a table there will be , but the columns are certain, which is 9, from A to I.
View 4 Replies View RelatedI have 7 sheets including the table as you can see on the attached. Now, each sheet is allocated to individual items e.g. item 10, item 20 and so on. I can't figure out how to return all the Item 10, 20, 30 ... to the corresponding sheet. It says Item 40 to all sheets.
View 8 Replies View RelatedI have a spreadsheet (attached is an example).
The problem I have is that there is a check cell in column J that either "A" "B" or "C" can be entered and the total in column K can be used in different sheets in the workbook.
Here is the part I cannot get to work, If "C" is selected in the check coulmn then Columns G,H,I, are not allowed to contain numbers and a warning dialog should appear on screen. I have tried numerous ways to get this to work and have given up
find attached the Report file. I prepared two sheet in this file and also add my question in the file. my question is about validation selection and get data from other sheet.
View 2 Replies View RelatedI would like to create a drop down list. So far I have done this using Data/Valadation. I like this method alot, but would somehow like to put the data on a seperate sheet in the workbook. Data/Valadation doesn't enable this. Anyway around this?
View 4 Replies View RelatedIs it possible in data validation to have a list from other sheet? Example:my list is in Sheet of the same workbook.
I want to have a four sheet database for a client list. Sheet one would be the "master sheet" and will have a column that has a validation drop down with the values "current client", äctive prospect",""dead deal", etc. I want the information from the master list to automatically move to the corrisponding sheet(s) when the validation is chosen.
View 9 Replies View RelatedTheir is sheet in which some online data is comeing.
#1 I have to copy that data in another worksheet and its name shud be last 3 characters of the sheet in which data is comeing.
Say for example data sheet is abcd_2781 so new sheet name shud be 781
#2 now i have to copy the data based on certain validation
the sheet has 14 colums
the data keep coming in....every time it comes with a unque ID.
but when it comes there is a colum which tell us three operations
0=NEW
1=change
2=DELETE
And so when ever we copy data it shud only copy 0,1,2 it shud not copy new, change or delete.
Now there is one more colum in which their is entry ID, it carried diff ID for NEW transactions. But when ever their is change or delete it will be same what ever was generated when it was new. so the validation shud be
when its 1= change it should match its Entry ID and delete the complete ROW with all previous same ID keep this only
When its 2= Delete it should match its Entry ID and Delet the complete row with all same including itself.
i am attaching the input and out put data
Input data Output data
MDUpdateAction MDEntryID MDUpdateAction MDEntryID
0=NEW 100302 0 100302
0=NEW 100303 0 100305
0=NEW 100304 0 100306
0=NEW 100305 0 100314
0=NEW 100306 0 100313
0=NEW 100314 0 100315
0=NEW 100313 0 100316
0=NEW 100315 0 100293
0=NEW 100316 1 100291
0=NEW 100291
0=NEW 100292
0=NEW 100293
2=DELETE 100303
2=DELETE 100292
2=DELETE 100304
1=CHANGE 100291
I m using Data/Validation function in Excel2003? Is it possible to have reference list of drop down input from another sheet? I recorded the macro for this function and had the following result
Sub Macro1()
Range("A1").Select
With Selection.Validation
.Delete
.Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _
xlBetween, Formula1:="=$C$2:$C$6"
.IgnoreBlank = True
.InCellDropdown = True
.InputTitle = ""
.ErrorTitle = ""
.InputMessage = ""
.ErrorMessage = ""
.ShowInput = True
.ShowError = True
End With
End Sub
How can I change reference List from the same sheet $C$2:$C$6 to "sheet2!$C$2:$C$6" or it is a limitation for this function?
i'm trying to do (for the past couple of days manually) is copy the names from the 2nd sheet to the 1st sheet but need to make sure that the proper location ID match that of the 1st sheet. If two names is assigned to the same location, a new line will be added to the 1st sheet but never allow if the location ID do not exist.
<1st Sheet>
A1, B1, C1, D1
ID, Name, Loc ID, Location, contact, date
1011,-, 101, 1/F, RM101,-
1012,-, 102, 1/F, RM102,-
1013,-, 104, 1/F, RM104,-
1014,-, 203, 2/F, RM204,-
<2nd Sheet>
Name, Loc ID, date
Thomas,101,10/03/09
Anthony,101,11/02/09
George, 102,11/25,09
Susan,203,10/31/09
Carrie,103,11/20/09
What would be the correct syntax for pulling information to the input message box from another sheet?
Code:
Sub test_data_validation()
'
' test_data_validation Macro
'
Dim nrows As Integer
Dim i As Integer
Sheets("sheet1").Activate
[Code] .........
I need to get data copied from sheet1 to sheet2
depending on selection in a validation list.
The data is on the same row and all the same range.
So it would look something like this.
A B C
Fruit Orange Apple Pear
Veg Potato Carrot Onion
Animal Bear Cow Dog
I have the data in A in a dynamic range and validation list.
I need all the data copied from the specific rows ie
choose Animal from the validation list in Sheet2!A1 and
the entire row Bear Cow Dog get copied to Sheet2!B1, Sheet2!C1, Sheet2!D1.
The second problem I think is a lot more complex.
So the same scenario above but this time its a multi select on Sheet3.
I need to be able to select two (or more depending on Fruit and Animals to display in A1, A2 and then their valid options to appear in B, C and D
I am currently working in an excel file for which i want to create a macro. I am using colomn F as the base from which it should be determined whether a row should be copied. In colomn F the user can select three options through data validation. If 'completed' is selected, the whole row should be copied to the second sheet, and each copied row should be pasted to the next empty row. The data on the source sheet starts at row 11 and should be copied to sheet 2, starting from row 11 as well.
View 5 Replies View RelatedI have an endless list of information that I need to turn into a text string, lookup with a validation on the end.
The easiest way is to show you so I've attached the info and what result I want.
Attached File : Test.xlsx‎
Is there any vba codes that can show tab/sheet that is based on the filter selection.
For example:
Cell A1 have a data validation of Apple, orange and Mango
I have 3 tabs named Apple, orange and Mango.
So every time I select Apple on the main in page filter. Apple tab will show. and if orange then orange tab will show.
I am running into an odd issue and hope someone might be able to shed some light.
I have created several lists on one sheet in a workbook and have assigned named ranges to each individual list. So far, so good.
On various other worksheets, I have created Data Validation rules to allow users to select the relevant data from drop-down lists. (using formulas such as =List1, =List2, etc. in the Source box to capture the named ranges I had created).
Everything works perfectly...EXCEPT for one worksheet, which continues to give me the error message, "You may not use references to other worksheets or workbooks for Data Validation criteria." Can anyone explain why this error would only occur on one worksheet and work fine for all the other sheets? I'm perplexed!