I have a lot of spreadsheets where the vales are sorted in the same way and I would like to have a macro for copying the values. But, I don't know how to made it. I am not familiar with VBA and commands for excel. I found on the Internet some macros and try to make my own one, but it was not so successful.
What I want to do? Blue values are state before running the macro and green values are state after running the macro. I don’t have just 20 values. It is around 1000 values, so 1000 values to 100 columns. And only the numbers should be copied.
I have a large worksheet, with approx 15 columns of data, which is a straight data dump from a very old sales reporting system - so the whole thing is a mess.
As such, I auto filter the report, and select certain criteria from various columns, which leaves me with just the data I wish to see on screen.
What I then need to do is copy across any visible values (after this filtering) from Column C (missing out row 1, which is headings), into the same row in Column E.
At the moment, this is a manual process, because if you highlight the entire selection of codes in column C, then paste in Column E, due to the filtering, the paste puts the values in all the wrong places.
Is there a way around this - or a macro which will copy the values to the same row but in Column E?
I've got workbooks containing various numbers of sheets that represent rooms with equipment in them.
The room number is always in cell B4. The data always starts in cell A8. I need to somehow copy the room number down column G starting at G8 and going down only as far as there is data in column A, which will vary for each sheet. I also need it do do this on all the sheets in the workbook.
I have NO marco skills, can anyone help start me off?
See attached spreadsheet for reference : MacroHelp.xlsx‎
I would like the macro to look in column I, and when it finds "TRUE", I'd like it to copy and paste values in all the cells to the left of it.
Reason being is that I want to rid the row of its formula, so the next time someone changes the info (the date the vlookup is searching for) in the tabs those cells are referring to, I will not lose the data it returned previously.
Really all I want is to copy and paste the values in the lowermost row of new information for each plant, but this is the best way I can currently think of.
I've removed the tabs the cells in columns B-G are referring to for sensitivity's sake.
I am looking for a macro that will copy a worksheet to a new workbook and 'paste as values only' - this is because I already have a macro that I am trying to use to 'autofilter' the sheet to only show rows and colums that have entries in them. Since the sheet is dynamic, the macro will not work unless I copy and paste as values only...
Workbook attached - FYI, the 2 sheets in the workbook are actually in 2 separate books, I have just put them together to make it easier to post here...
I have an existing macro that copies a worksheet and pastes it into another workbook, renames it and then attaches it to an email. My problem is that it pastes just the values. I need it to paste part of the original worksheet as values and part copy the formulas. So on the new workbook Columns A through F will be values only and G through Z will copy the formulas.
I'm trying to use a macro that will copy & paste values from one workbook to another. Everything works fine until I try to get it to Paste to next available row.
It worked the first time, but after that it jumps, several hundred rows at a time.
I have attached a file with an example of what I need. The data tab show the data has been given to me. I need it in a different format to be able to load it into our system. The Needs tab shows what format I need. Basically, I need to convert this table into a flat file, where there is a record for each "X" value only.
I need a macro that will take the values that are in the far right cells and move them to an area on the left. the columns they will be pulling from are the IU & IV column starting with row 2 down to row 460. from there I need the values to be pasted into the D & E Columns starting at row 6. The two columns IU & IV are a date and a task for that date. When they are pasted into the columns D&E they will need to be sorted by dates (or just all of the blanks removed), with the soonest occurrence at the top. The reason for pasting values is because I have formulas pulling the tasks and dates off of another sheet. The last thing is that the macro needs to be triggered by the information in cell c2, when that cell is changed the formulas go to work and everything in cells IU & IV update. That is when I would like the macro to kick in and work the miracle.
I have been trying to build a colony of formulas that could do it, but I have given up, then I tried to make an array index it for me, but that wasn't working for me either.
I have 9 worksheets in a book with sheets 1-8 used for data entry, and sheet 9 used for a weekly data upload. Sheets 1-8 are all formatted the same, they just represent different vendors. I need a macro to look through column F (invoice number) on sheets 1-8 and see if the value of each cell already appears in column c on sheet 9. If the value is not found and the row value for column M (sheets 1-8) is >0, I need to copy the data from columns D:K and paste special values into the next blank row on sheet 9.
Basically I'm trying to see if I've already paid an invoice, and if not then I need to automatically add the data for payment. I've tried to mess around with a VBA code myself and ended up with a migraine every time. I've also tried to use the advanced filter, but the cell values I need to copy over contain formulas and conditional formatting...not to mention I can't delete the data on sheet 9 that has already been added.
I have a multi-worksheet spreadsheet in excel 2003. I want to produce a macro that will just save a copy of the front worksheet values only. That is I don't want to save any formulas or any of the hidden worksheets, just the front page report, plus it's formatting/layout.
I am trying to develop a macro that allows the user to copy and paste a set of date and time values, move them to the next sheet and increase the month by 1. I need help trying to find out how can I create a counter for the program to keep running without the need to reprogram the macros again.
I want to run macro for copying specific cell values from worksheets according to their headers in one final worksheet of the same workbook. worksheets can go upto 30-31 ws as per the dates in the month. This would really save time and energy of copy paste.
I got a macro to copy and paste values onto another tab within my worksheet. I have a lot of data and currently takes about 30 seconds to calculate and paste. Not sure if its an issue with my macro or with my computer (Mac - Excel 2011).
Here is an example of my macro:
Sub SimulateWeek() If Range("AdvanceWeek").Value = "Week 1" Then Range("Week1B").Copy Sheets("Schedule - Results").Range("C2").PasteSpecial Paste:=xlPasteValues
[Code]....
(this continues on until 'ElseIf Range("AdvanceWeek").Value = "Week 31"....etc). So you can see I have the same code repeated 31 times.
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
I am trying to create a macro that will copy any folders that exist in any of the paths listed in the first column. The folders should be copied to the path of the open workbook containing the macro. Below is the macro I have currently, much of which was taken from information I found in this thread [URL]....
VB:
Sub wrapper3() x = 1 Set fs = CreateObject("Scripting.FileSystemObject") While Sheets("Air").Cells(x, 1) <> "" v = InStrRev(Sheets("Air").Cells(x, 1), "") dest = ActiveWorkbook.Path & Mid(Sheets("Air").Cells(x, 1), v, 99)
[Code]...
This code seems to work fine if all of the folders exist to be copied. My problem is that some do not and it is creating a "Path Not Found" error for which I need a fix. If the folder doesn't exist at the path nothing should be copied and the next path can be evaluated.
I have an Excel database of department contracts with a Master worksheet. I have created a worksheet tab for each of the departments. Column G has a dropdown list for each department. When I enter a new contract onto the Master I want it to auto copy to the coordinating worksheet based on the selected department.
If possible I would also like it to enter the newest contract would enter into the coordinating Contract Party entered into column D. (ie... If Hospital A is entered in column D on master, the new entry on the worksheet being copied to will be entered under the last Hospital A, if Hospital B is entered on Master it copies under Hospital B). If this isn't possible then I am not too worried about that part.
I have attached a blank version of the file. Current Master 5-15-14.xlsx‎
Copy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
I'd like my macro (in an Excel 2010 workbook) to copy values from three worksheet cells and append them to an existing Access or SQL database file -- without having to leave my Excel spreadsheet or open any other programs. The database file simply needs to be appended. Keeping a running list. That file isn't being used for anything else, we can set it up however is necessary to do this.
For example, Excel cells A1, A2, and A3. Representing Job Name, Job Number and Job Total.
how make VBA do this(in SIMPLE terms)? Or give me a link of where to look or what to search for? I understand VBA but not Access or SQL.
I have a workbook that has a lot of formulas in it that reference material stored on my local computer.
I need a macro that will copy all 42 tabs in to a new workbook book without all formulas, but saving all the formats have made. This would save me from every other day coping and pasting manually each of the pages.
I want to build a database where the user can select a specific time period. I have a static file with the time periods and the related values. For instance I have in column A1:A15 the time periods from January 2011 to Dezember 2011, but I have some dates multiple times as there are more values attached to it. For instance I have in the first 4 rows January 2011...what I want is when someone puts in the value January 2011 in cell B1 and Dezember 2011 in cell B2 that the whole static file gets copied to another location (including the multiple dates) displaying the chosen time period. Similarly if someone puts in the value March 2011 to November 2011, I want only those values to be copied.
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.
The following macro does what it is designed to do and needs to be run from a control sheet called "Guide". When I run it from this Guide sheet it stops at around row 53 (out of 1400 rows) on each of the specified sheets in the macro. I have struggled with this problem and have now discovered that the macro will run correctly when run from one of the worksheets specified in the array, e.g. sheet "200 and 100".
Sub Calculateclosingtrades1() Dim r As Long, c As Integer, LastRow As Long, rcheck As Long LastRow = Range("J65536").End(xlUp).Row Dim shtTemp As Worksheet Dim vntName As Variant
For Each vntName In Array("200 and 100", "100 and 50", "50 and 25", "40 and 20", "20 and 10", "15 and 10", "18 and 9", "200 only", "100 only", "50 only", "40 only", "25 only", "20 only", "15 only").............
I need a Macro (not formula) which compares the comma separated values present in Column "I" with individual values present in Column "D" and generate the count of unique values in Column "J".
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
How do you write an excel macro that looks at the number in the first column (day #) and finds all the duplicate id#s in the second column that are in day 1and adds the amounts together in the 3rd column then writes the first column number (day#), second column number(id#) and the third column (sum of the amounts of duplicate Id#) to an new worksheet. Then the macro would loop through day #2 and do the same thing. Notice that the values in the id column are unique in this data set below this is how I would like the data to look. I have accomplished this in a pivot table but my problem is I need a cvs file to export the final data into an external database which is why I need a macro.....
