I am trying to find a formula that will choose the last number from a column of data. The column has a number added everyday and I want the last number entered to be pulled to a different cell.
e.g.
34
35
35
33
38
37
so 37 is entered into the cell
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed
Disposal Order
Latest Decision date for D.O.
06/05/2014
D.O.001
[Code] ........
Pull Column Data (Sheet3) from Master.xls and past to Column 4, Sheet4 of WorkingSS.xls
I'm assuming this would be done with VBA or a really exotic macro.
The Funky Part would be that the WorkingSS.xls file column data is being copied/pasted too (WorkingSS1.xls or WorkingSS2.xls ect) the file may be different every time so I would need an insert in macro or VBA to "Choose File Please..." then continue.
The Master.xls workbook has spreadsheet lets say "Sheet1" in which I need all the data in Column A (except the header or cell A:1) copied TO WorkingSS1.xls on Sheet4, Column B, but Column B already has about 6000 rows of info, so I need it copied to the very end of (A:6001 although it will be different everytime) or the first empty cell at the bottom of that column.
next another Column from Master.xls workbook lets say "Sheet1" again in which I need all the data in lets say "Column B" copied to the WorkingSS1.xls on Sheet4, Column F. Caveat this time is that the data needs to copied to the same row as the first copy/past. So it would be pasted into F:6001. Double caveat is that the Column F contains no other data except for what we are about to paste in.
I have several more steps of automation to be done here but this is the beginning and a big hump I need to get past. The rest I think I can do.
I need to look up the name in E2 in the list in column A and if it matches then lookup name in F2 in list column b, if it matches then the corresponding number in column C is displayed in column G. If neither names are in the 2 columns the words"Not on lists" is displayed in cell in column G.
The other problem is one name is spelled two different ways I want it to look for both spelling before moving on to looking up the second name.
I started with this formula but I'm getting #N/A or "not on list" when they are on the list. I'm using ranges prod_sum is columns AthruC, Last_name is range BthruC. =IF(AND(VLOOKUP(F4,prod_sum,3,0),VLOOKUP(I4,last_name,2,0)),"not on list")
Item Quantity
A 2
S 7
D 3
F 6
I am looking for a ranking formula that will pull the data from the
first column based on the ranking of the second column
so that the end result will look like this
1 S
2 F
3 D
As S has the largest quantity, F 2nd largest etc
The list I will pull this from is variable in length but in the
hundreds.
I have a spreadsheet of several thousand named items (in column B) with values associated with them in column A). The "name" field is a string of several alternative names for the item.
I have a list of ~50 items that I am trying to find the values for. Each uses one of the alternate names.
What I want is a function that will return the associated value in column A when one of my shortlist names is found.
For example, my big spreadsheet looks like:
AB
1dallas, DFW. 12345
2Atlanta, ATL, 23456
3Boston, BOS, 34567
4Chicago, CHI, 45678
5Los Angles, LA, LAX, 56789
And my list looks like
Atlanta
CHI
I want the output to look something like:
Atlanta2
CHI 4
Is the feasible? IT seems like there should be a way to do it....
I got it when I click on the cell it loads the userform but it is populating with row data instead of column data.
I would like when I click on for example cell T4 and the userform pops up to see the textbox data going down the rows instead of across which is is currently doing.
so clicking on T4 brings my userform up filled in with information from
T5 and U5
T6 U6
T7 U7
T8 U8
T9 U9
I have when I click on the cell T4 column
label amount receipt
electricity 384.00 ZgHl2V
This way I can change amount or receipt and update my worksheet.
VB:
Private Sub UserForm_Activate()
Dim r As Long
r = ActiveCell.Row
[Code].....
I have a list of project numbers in column "J" and i need to pull the first six digits of the project number to column "O"
View 4 Replies View RelatedIf I have a columns of numbers that vary in length, and can have empty cells between the final value and the formula to pull the number (of varing lengths), what formula can I use to repeat the final value?
For example - here are two columns:
4,800,000
0
46,594
space
space
<formula to pull 46,594>
or
56,000
48,150
36,528..............
I have stored production data in Column A. I want 5 data randomly pulled from that column with click of a button. Would this Happen?. I have attached an excel sheet.
View 2 Replies View RelatedI have a column of numbers each have a 0. infront of them (example 0.2346
0.5698). I want to pull the number from the right until it hits the decimal sign. So for the two above the result would be 2346 and 5698
I'm doing a termination report at work and I need to create a pie chart based on data in a selected column. Ive never used excel charts before but I cant get the pie chart to display the information that I want.I created a sample workbook. Its very a simple column of data. I would like a pie chart based on the percentages of "yes" to "no". I havent been able to get it to work.
View 6 Replies View RelatedIs it possible to make every 17th row column A state the same thing without manually inputting it and then would is it possible to get every 17th row column B to pull certain data from other cells in B and put it together?
Example Column A has First Name, Last Name, and Phone. Column B will have the manual inputs.
Then I add another blank row after Phone for Password. The password will be the last name and last two digits of the phone. Is it possible to do this automatically if the other three fields are filled or does it also have to be manually input?
Here is what i'm working with:
http://img90.imageshack.us/my.php?im...uestionas8.jpg
what i want it to do is pull out the stuff in column C and put it in column F. But i don't want it to duplicate it at all. So for instance in this case, submarket 1 would be cary-morrisville-apex / submarket 2: northwest wake / submarket 3: north wake etc.
would this involve a VLOOKUP function but an if then function as well? I'm not really sure how to go about it.
I am trying to pull peoples names from 3 diferent tabs into one column in a separate tab. But if a name is shown more than once only display it once. How can I do this?
View 1 Replies View RelatedI have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
I have three columns of data laid out like this:
Column A Column B Column C Column D
(blank) Purchase Orders Shipments # Shipment Reference Field
12345 1ZX123 xxOO12346
12346 1ZC345 KJH12347--45
12347 1Z7YYT 0000012345XXX
I'm trying to write a formula for column A that essentially looks at the field in column B, finds the instance of the data anywhere in the entirety of Column D, and when it locates it puts the corresponding field from Column C of that line in the results of column A. So the result above would turn out like this:
Column A Column B Column C Column D
(blank) Purchase Orders Shipments # ShipmentReferenceField
1Z7YYT 12345 1ZX123 xxOO12346
1ZX123 12346 1ZC345 KJH12347--45
1ZC345 12347 1Z7YYT 0000012345XXX
I have the origins of a formula here...but I don't know how to put in the part where i'm retrieving the data from Column C of the same line as the target data.
=INDEX($D$1:$D$100, MATCH(B1,1*LEFT($D$1:$D$100,LEN(B1)),0))
I have data in every other row in a column from rows A1 to A12455. I would
like to know if there is a keyboard shortcut that takes me directly to the
last cell (A12455) in the column that has data in it.
I have a similar question as displayed in this post, but I only need to calculate the last entered value in a column.
I want to set the column to search using Find in second code below.
Can't get the code to cooperate even though myCol does properly reflect the column number.
And this little tester fails as well...?
Code:
Sub Booger()
Dim myCol As Long
myCol = InputBox("Enter a column number")
With Sheets("Sheet2")
.Range(Cells(1, myCol), Cells(25, myCol)).Select
End With
End Sub
Here is the segment I am trying to make work in the main code
Code:
With Sheets("Sheet2").Range(Cells(1, myCol), Cells(25, myCol))
Set Rng = .Find(What:=FindString, _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
[Code] .......
Looking for a formula that will only display the last entry in a column.
ex: Column A has data that is sporatic. (mike, "blank", "blank", fred, mary, "blank" ,john. I want to display in C1 the last entry, "john")
I am having a problem where imported data from access will not be refreshing in a cell. It will not perform a calculation using the imported data. What the code does is import the data into a cell, then if the label of the row is not empty, perform a calculation. The weird thing is, if I open the VBA editor and go through my code line by line hitting F8, it works as I would expect. It is only when I run the macro either as a button or with the control toolbar that it will not work properly. I am not very experienced with VBA
Sub DrivesByAutomationByDonorGrp()
Worksheets("Mkt Penetration_DonorGrp").Range("C4:F2005").Clear
Worksheets("Mkt Penetration_DonorGrp").Columns("F").NumberFormat = "0.00%"
Worksheets("Mkt Penetration_DonorGrp").Columns.Hidden = False
'Columns("C:E").Select
'Selection.EntireColumn.Hidden = True
Dim qt As QueryTable
sqlstring = "select [Drives Without Automation], [Drives With Automation]" _
& " from qryDrivesByAutomationByDonorGrp"..................
I have tried a slew of different formulas but I can't seem to get the outcome I am looking for. I need to make a station comparison for an individual project build based off a master list. Sheet 1 has the individual build with column A as a part number, column b as a description and column c as a quantity required and column D is blank. Sheet 2 has a master list of every part we carry formatted as: column a as a part number, column b as a description, column c as a quantity required and column d as a unique station identifier for that part (which is always a number).
What I am trying to do is match the part number on Sheet 1 Column A to Sheet 2 Column A, and when a match is found, take the unique identifer under column D associated with that part number and have it displayed on Sheet 1 Column D.
Sheet 1 will change with each build, but it will always be the same format in columns a,b,c,d. Basically I have a format on sheet 1 for what is needed to build each custom kit (787 kits) and sheet 2 carries every part we offer along with the identifer in column d (always a number value). I want to create a formula I can easily copy to match the value in sheet 1 column a to sheet 2 column a and add the identifier from sheet 2 column D to sheet 1 column D. The average kit is roughly 120+ parts so doing that for each part 787 times will be a nightmare. Also in case this matters, sheet 1 column A will have the parts arranged in a random order based on what is desired for that kit. Sheet 2 column A has the part numbers in order from our lowest part number to the highest number (basically an entire inventory list sorted from lowest to highest).
Example
(For sheet 1, since it doesnt carry formating 11111111 is in column a, nut, flange is in column b, 1.00 is in column c and the output data i want would go into column D)
Sheet 1
A B C D
11111111Nut, Flange 1.00 *Starts blank* -looking for - Output from Sheet 2 Column D (1)
33333333Bolt, Squared 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (4)
55555555Bolt, Coated 3.00 *Starts blank* -looking for - Output from Sheet 2 Column D (2)
22222222Bolt, Hex 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (11)
44444444Bolt, Screw Type 2.00 *Starts blank* -looking for - Output from Sheet 2 Column D (3)
Sheet 2
A B C D
11111111Nut, Flange 1.00 1
22222222Bolt, Hex 4.00 11
33333333Bolt, Squared 4.00 4
44444444Bolt, Screw Type 2.00 3
55555555Bolt, Coated 3.00 2
I have the following data :-
SHEET 1
COL A_______COL B________COL C
V1990_______J100_________U1212
H2323_______Y999
U2222
SHEET 2
COL A_______COL B________COL C
U2222
I0000_______U8900________T67888
H2323
I need to search data from range defined A1.C3 and if any data in that range found in the sheet 2 that having the same records.
I want to lock column as and when your fill his report
E.g. in column C user filled report on 1st of this month
On second day column C must be locked or protected
User must enter in D column only
1.I've watched tutorials on youtube but the data entry was on the next row. I want that my data entry to input data on the next blank column. I'm having problem with the code to use
2. And i hope that there's a way that the P.O. number will arrange in ascending order.
Example : The last P.O. number was 005 then i've realize that I've missed P.O. number 003. And I want to input P.O. number 003 and it will be arrange.
untitled.jpg
I would like a loop that would run through the information in column A and if its duplicated delete the entire row… Also it needs to be able to handle 10 records to 10,000, it changes daily
View 3 Replies View RelatedI have a list in a column and just want to count how many of each entry exists and place that number in another list:
Column A Column B Column C
abogado 4 abogado
abogado 7 mammamia
abogado 8 trifecta[code].....
An image is here: 12.23.2013-13.59.36 - joezeppy's library
I want to create a table that lists the number of entries for each cell in column a and then lists the entry next to it. Can I use a pivot table or something?
I have a huge worksheet with 26 columns and 1200 rows. This worksheet is updated by 4 people everyday. Column C, H, N & R are updated daily by these 4 people so these are dynamic columns so to speak. I would like to have a VBA that informs that particular individual when he enters a duplicate data, maybe a popup saying duplicate entry.
View 9 Replies View RelatedI've got a spreadsheet with various amounts in cells A3:L5. I want to find the last non-blank entry in each row but only where the entry is in a column headed "Guaranteed PRB" (found in row 1). Then I want it to return the column header title found in row 2, which is a date.
I've attached a sample of the spreadsheet with the expected answer in column M.
I've got as far as formula:
=LOOKUP(2,1/(a3:l3<>""),$a$2:$l$2)
how to also make it look at row 1's headers too.
