Is there a (relatively) easy way to use vba to search a whole workbook (5 sheets) for a value entered via a user in an inputbox and then if any instances are found the entire row of the sheet it's in is copied to a new sheet, then any further instances found also would repeat that building a single sheet view?
View 4 RepliesI have a main worksheet called 'uren'. In this main worksheet I load data every week for around 40 persons. Every person has their own sheet, named equal to their name in the main worksheet 'uren'.
What I try to figure out is how to copy alle the data below their name in the main worksheet to the sheet which is named equal under the right weeknumber.
My main worksheet is build up like this ( used --- to keep the numbers in place when posting )
Weeknumber 1 ---Andre----Wiebe----Kayleigh----Sandra----etc
Complaints --------23-------45--------87---------34---------
Help-------------23.56------45------12,89--------67-------
Call---------------44--------4---------56---------12-------
hours-------------2,4-------56---------6--------34,67-----
etc
When the data is loaded ( the numbers you see) I want to copy all the data below a persons name ( number behind complaint, call etc) to the sheet which has the same name as the person. the data has to be copied to the correct weeknumber I use in the main worksheet.
The 40 additional sheets are build up like:
Weeknumber-------wk1-------wk2------wk3------wk4------etc
Complaints
Help
Call
hours
etc
So the data has to be copied under the correct weeknumber. The data in the main worksheet is loaded with a function and I quess the data also has to be copied without the fucntion (?)
I have a workbook that is an export from an inventory database. Basically I need to search Sheet1 column B for any item with "DDC" in its value, select the entire row, copy/cut it, and paste it into Sheet3. It would be nice to have it delete the row from Sheet1 after successful paste. I want to stress the fact that I'm a no0b with excel macros and have a very small understanding of programming in general. I've tried taking a few different macros with similar goals and slapping them together, this is what I've come up with so far with still zero luck.
At the moment the error is "Application-defined or object-defined error" with "With Worksheets(1). Range("B")
Sub DDC()
With Worksheets(1).Range("B")
Set c = .Find("*DDC*", LookIn:=xlValues)
If Not c Is Nothing Then
firstAddress = c.Address
Do
c.EntireRow.Copy Destination:=Worksheets("Sheet2").Range("A" & Worksheets("Sheet2").Range("A65536").End(xlUp).Row + 1)
Set c = .FindNext(c)
Loop While Not c Is Nothing And c.Address <> firstAddress
End If
End With
End Sub
I need to search a sheet for a specific phrase "phrase". When the phrase occurs I need to copy adjacent cells into another sheet. Then, I need to continue searching through the end of the sheet for all other occurrences, copying them into the other sheet. For example: "Phrase" occurs in cell B2, B20, B42, and B82 of Sheet1.
When it occurs in B2 I need to copy C2 and D3 into Sheet 2, cells B2 and C2.
Then when it occurs again in B20 I need to copy C20 and D21 into Sheet 2, cells B3 and C3.
I have a Excel file with alot of data in it. I need a macro that will create a report for me and relive me from alot of manual work. The 1st sheet is named "Projects". This contains the search arguments. The 2nd sheet is named "Database". This is the sheet where I want to search in. The 3rd sheet is named "Report". This will contain the results of the search. So the going will be something like this:
Copy row 7 from "Projects" into row 7 in "Report". Then use the value in that row, column E (named Search code). Search for rows that has this value in column E in the "Database" sheet. Copy all those rows to "Report" sheet. Copy row 8 from "Projects", leave two rows of space and paste into "Report". Repeat the procedure mentioned above. Repeat this until reaching a row in "Projects" that has no value in Column A.
I am pulling from odbc into an excel sheet
Thier is one column with our Sales Order Numbers.
I would like to have a search box or box pop up asking a user to enter the Sales order number they need.
Once they do that it will search thru the list and copy the rows with that Sales Order Number, then paste them to another sheet.
I need help on setting the searching part up and selecting the range to copy....I think I can take it from thier after that.
I am trying to find a function that will search for a particular name in a range and return ALL rows (or, preferably, specific cells in that row) which have that name in it, onto a new sheet.
eg. Sheet 1
Fred 45m $50 6/2
Joe 30m $35 5/28
Pete 60m $60 6/4
Fred 30m $30 6/6
If this range was on sheet 1, I would like to show on sheet 2 all times and dates for Fred in consecutive rows. ie the result on sheet 2 would be: Sheet 2
Fred 45m 6/2
Fred 45m 6/6
If selecting individual columns cannot be done, then the whole row would be fine.
I have a workbook with 50+ sheets. Within each sheet are rows of data in column A that I'd like to search for specific text.
I'd like to search each row from every sheet for specific words (e.g. "7 days" AND "Monday" AND "Tuesday" etc.) then copy the entire row containing all my search text in a new sheet on column A along with the name of the sheet it was found in in column B and the row number it came from in column C.
What I am trying to accomplish is to search through all the sheets and post results in new sheets for each search string.
I have a workbook with one sheet (called "Pipeline") and another sheet called "Completed". The Pipeline sheet is used to keep track of all of the tasks that the team are working on, and then when the task is completed, it needs to be moved to the "Completed tab".
I currently have managed to write some code that looks for items marked "completed" in row G of the "Pipeline" sheet, then copies them over to the "Completed" tab, and then deletes the row from the "Pipeline" sheet.
There is one macro to copy the completed cells (called "Transfer"), and then another to delete the cells (called "Delete"). I then just have macro called "Clean" that just calls the transfer macro, and then calls the delete macro.
Often, there are 6 tasks marked complete, and only some of them will be copied over, but all of them will be deleted (a disaster).
Transfer Macro : [Code]....
Delete Macro : [Code]....
Overall Macro : [Code]....
I have a table in excel with a group of headings. (Serial Number, Model, Description, Repsonsible and a few others) What I would like to do is be able to search every cell within the range of that table. When the user clicks search an inputbox is displayed and you can enter any search term you like. if there is a match within the cell range, i want the entire row (and the heading row always at the top) printed into a new sheet to display results. There may be a match in multiple rows, and id like evrery row displayed.
View 5 Replies View RelatedI would Need a macro which would Search a Keyword in the excel sheet and copies and pates the data in Cell "A2". for Example "Market" and then after the search it copies 12 rows upwards and 10 columns from the Cell that the word "Market" is placed. And then it copies 12 rows downwards and 10 columns from the Cell that the word "Market" is placed.
I have tried recording the same but it does not work if the Word "Market" is placed in different cell value.
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
Our small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.
When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:
Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.
The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.
Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
I need a macro that can search a sheet for a match and then copy all 7 cells to the right of the match. I have attached an example of the sheet that will serve as the database to search, and a userform example that will be similar to the userfrom that will display the copied cells when a match is found. I plan to copy and paste the 7 cells to a different sheet so that the userform can display the results with the control source property. I do not need a way to add to this database. I know very little about searching a database so.
View 6 Replies View RelatedWhat I have is a sheet that is copied periodically from some source sheet, and on this sheet is a table. This sheet is called "Onsite Checklist Template" and it's table is titled "Checklist". I also have another sheet called "Loggers and Initial Notes" which has a tabled titled "Record", and then finally a title sheet call "Proj Details".
To clear this intro up - The sheets, in their order, is: "Proj Details", "Loggers and Initial Notes", "Onsite Checklist Template". The tables: "Record" on "Loggers..." and "Checklist" on "Onsite..."
When the user wants to make a new site visit, he/she fills in the requested date and then selects a button on "Proj...". When this button is selected, it copies the table data on "Record" and puts it on "Checklist", then inserts a new worksheet tab, always in the 3rd position (the title is based on the site visit date in which the user entered), which is a copy of "Onsite...". Now we have another sheet with a table called "Checklist1", and upon another new site visit, there will be another worksheet with "Checklist2", and so on.
On the "Onsite..." worksheet, there is a button on it which also gets copied with the worksheet so that every new worksheet has this copied "Checklist ???" and this button. I'm looking for a macro that, when the button is selected, will bounce the active sheet's table "Checklist ???" off of "Record" and make changes as needed.
"Checklist ???" data range is B11:M20 (the header is on row 10); "Record" data range is B29:Q78 (the header is on row 28); Column headers are titled the same, just that "Record" has 4 extra columns, 3 in the middle and 1 on the end. "Checklist ???" columns 1-12 to "Record" columns 1-7, 10-12, 14-15. The search criteria is the 4th column in both tables ("Trk #").
I need the macro to do the following:If it finds a match, then update "Record" as needed with data from "Checklist ???", changing whatever cell is different in the row that contains the matching "Trk #", so long as the cell on "Checklist ???" is populated (i.e, if a cell on the target row of "Record" has a value, but it's blank on "Checklist ???", then "Record" wins; if it's blank on "Record", but populated on "Checklist ???", the Checklist wins. If both populated but different, then Checklist wins.If a "Trk #" exists on "Checklist ???" but is not on "Record" then add the line to "Record" (the 1st empty row, table size remains)I see no need for any "delete" at this time.
My concerns: The last column on record (column #16) is the filtering column for the worksheet copy event and needs to be left alone (it's formulated to produce a "Yes" or "No")I would like the ability to adjust table sizes if needed without modifying the macroThe table rows on "Checklist ???" will not be changed, deleted, or altered in any way by the macro.
Here is an example of my spreadsheet: Excel example.xlsx
I would like to get all the bid/ask quotes for the different currency pairs in sheet 2 into sheet 1 sorted by the right date and time.
I need a formula which recognize the time + the currency from sheet 1 and search for it in sheet 2 then brings the right bid/ask quote back into sheet 1.
Create a macro button in 'Spreadsheet 2' that searches 'Spreadsheet 1' for updated information specific to a certain criteria and adds it to a new row in 'Spreadsheet 2.'
There are three sheets
Prospects (where all original data is entered)
Actions -Bob (Bob's new Prospects are added to this sheet)
Actions -Frank (Frank's new Prospects are added to this sheet)
So in this example Row 6 in Prospects (Constituents, Rating, Manager and Solicitor would be added to ACTION - Bob's sheet on Row 5
and
Row 8 in Prospects (Constituents, its Rating, Manager and Solicitor would be added to ACTIONS - Frank sheet on Row 5
Here is the example spreadsheet - Prospects and Actions.xlsx
I have included the table. What I want to do is in a user form pick a county ie Devon, Then by clicking "go" all entries that contain "Devon" are then copied to a " sheet 2" I don't want to use the Ctrl-F
View 2 Replies View RelatedI've got 3 problems I've been trying to solve for the last 7 hours, I think they are all relatively simple to those who know what they are doing but I've exhausted my excel for dummies and every formula I have taken from this siteand tried to adapt. Obviously I'll post each problem on a different post, so here's problem one. The sample is attached. It will consist of about 35 sheets, each documenting the hire of a Motability scooter or wheelchair.
On each sheet column P will identify any review dates. What I would like is: On the Master page in Column C next to the relevant sheet name is for it to display any 'Review' that is flagged up, so that the user can have an overview. There will only ever be one 'Review' per sheet, I can only get the master page to show it by referencing it to one cell, I can't work out how to search the whole column.
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
I want to create a macro button that can create copy, insert, paste and rename the new sheet in next month's name, like if the active sheet's name is January, I want to copy the whole sheet of January, insert new sheet, paste the new sheet and rename the new sheet to next month like February?
Also rename the new sheet (February) cell B3 the same as new sheet's name (February)
So if month of February is near end, the macro button in February will create the same way as Jan did which means the next sheet will be named March and so on.
I would like in sheet1 a button, so the number is typed in then press the button and it will take me to that number in sheet2.
I have tried a few macros but they bring up multiple numbers and didn't take me to cell.
example of a database user form that will allow me to list records in a sheet as well as search for records in a sheet. I know excel has a built in feature for this but it is menu driven and I need something that is button driven and will allow me to resize the form layout. I was not able to figure out how to do that with the built in form.
View 7 Replies View Relatedthe macro needs to look in sheet2 column B, the data that it needs to look for is in sheet1 column a, once it finds the data in sheet2 column B, the original search criteria needs to be paste starting in sheet3 A1 while all the found data needs to be paste in column B.
It will then proceed to look for the next data in sheet1 column once it's done searching on the first item. I can't even think how to start with this one, it's too complicated for me. I attached a sample data. The search data is in sheet2 and the lookup data is in sheet1.
i want to use for searching a name in a colum. And copy the row of this name to another row.
I want to use this because i want to change an format to one i use all the time
person Astreet awork a
person Astreet bwork b
person bstreet cwork c
This is the situation: i want to search for person A and copy the data of the row , so copy street a. and work a. to another row
And i want to do the same for person b and so on until person z
sheet 2 column 1 has a name in it. I need to search sheet 1 column 1 for that name
when that name is found copy "b" thru "F" of that row
and procede until end of column (using that same name) and then go to next name in list (sheet2) and repeat
I have a sheet which have 20000 lines of row of data populated with data from column a to column n.
I need a formula or macro to search under column F for repetition of same data and to be copy the information of the row to a new sheet.
I'm dealing with 4 columns. Column A is a list of names. Column C is also a list of names, each with a number beside it in Column D (i.e "John Smith" in cell C1 with "10" beside it in cell D1). I need a formula that can search the list of names in Column A for the matching "John Smith", then put the corresponding number ("10") beside his name in Column B. Meaning...if the search finds the matching "John Smith" in cell A6, I need the formula to copy "10" to cell B6.
View 2 Replies View Related