I have receipt tracker where we are maintaining daily stock so I want vb coding for populate data from one sheet to other sheet.
When i enter slip no then data should be populate automatically from issue tracker to issue slip (Only yellow marking).
Sheet 1 contains a column titled "name" and 6 columns to the right of name titled "sat", "sun", "mon"........ the col titled name is not the first col in the work sheet.
In each row I enter the guest name under the name col and I enter a room number (example: 1A, 1B, 2A, etc...) in the column to the right that coresponds with the day the guest will be staying.
Name Sat Sun Mon Tue Wed Thu Fri
Mr. Smith 1A 1A 1A 1A
Mr. Jones 3B 3B 3B
Ms. Tiller 4A 4A 4A 4A 4A 4A 4A
Sheet 2 is in the same workbook and looks something like this:
Room # Sat Sun Mon Tue Wed Thu Fri
1A
1B
2A
2B
3A
3B
I want it to look at sheet 1 and populate the date columns with the guest name from sheet 1
I tried this formula =IF('Sheet1'!G:G="1A",'Sheet1!$F:$F,"Available")
It seems to work on the first row but I have problems with any rows below that. Basically it acts like there is no data in the rows below.... I think the fact that the names on sheet 1 are not alphabetical is creating part of my problem? I tried a lookup formula but it seems like it has to be the first column in the worksheet and it has to be alphabetical to work like that.
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
i have a sheet called 'sample database'. it consists of 56 columns, each with a specific title in row 1. i.e. name, surname, mobile_number, and so on.
from row 2 onwards the data has been populated for roughly 200 rows.
i have another 'Capture Sheet' which has the same titles as 'Sample database' except it's in a different format. its a printable form that is given to new employees when they start. once they have completed it it gets captured into the 'Sample Database' sheet.
my wifes boss now wants 1 new sheet for each row in the 'sample database' sheet based on the format/layout of the 'capture form'.
how can i get the 'capture form' to auto populate the data from the 'sample database' sheet and create a new sheet for each row?
i know this is possible i just dont know how to do it.
I have a master sheet that contains all data relating to a particular Agent like Agent Code(Primary Key), Name, Bank details etc so on and so forth. Every month I have to make a new sheet which contains only a few of the columns from the master sheet. I have to manually select and copy each column for the specific agents to whom I have to make the payments. Now, I wanted to know..if there is any way in which I can enter only the Agent Code in the new sheet and it will look the code up in the master and copy the values of the relevant fields from the master to the new sheet.
View 1 Replies View RelatedI have a spreadsheet that is updated weekly -- but every week new info is added that needs a user to input corresponding info. I use a vlookup function to link to another spreadsheet that populates the info from previous weeks and the info that is missing shows up as #N/A...
First I was using a msgbox function to get the info:
HTML Code:
For Each b In myrange
If Application.IsNA(b.Value) Then
Employee = b.Offset(0, -2).Value
SSID = InputBox("Please enter ID# for " & Employee & " :", "New Employee Found")
b.Value = SSID
End If
Next b
But it can be up to 30 different new employees... and that is time consuming.
I would like to make it more user friendly by creating ONE userform that displays all of the employees as labels -- has a text box in which to put the ID # -- and then has a drop down box to choose the type of employee (2 options). I want all of that info to go back to the reference spreadsheet so it will be saved for following weeks, and then redo the vlookup to get the info into the new weekly spreadsheet (I can do that part)....
HTML Code:
Private Sub CloseButton_Click()
Unload UserForm1
End Sub
Private Sub ComboBox1_Change()
[Code] ......
I have a user input sheet, where a user will input a process name & its link to the intranet. Next to the process name there is a column that takes the first letter from the process name so it can be used as an index point to transfer to another sheet. The sheet will have processes added all the time.
There is then 1 sheet for each letter of the alphabet. What I need to do is for a macro to run and then copy the name of the process in a cell and put the hyperlink in. Because there will be more than 1 process for each letter it will have to be transferred to different cells.
I'll start with the attachment since it's always easier:
Attachment 327508
This file is far from finished so there is some useless stuff there. What I'm interested in is in the sheet RecapTable (and in Etiq1 to Etiq4).
I'd like to write a macro that'll populate my Etiq1 -> 4 according to the RecapTable. Data would be set up as in Etiq1 A1:A3.
I don't have to have 4 template sheets and it could change if it's easier to do something else. The goal is to print labels so I maybe only 1 Etiq is needed, and the macro could populate, print, erase, finish populating, print again
1. Count entries in RecapTable (found something that does that! yeey!)
n = Worksheets("RecapTable").Range("A:A").Cells.SpecialCells(xlCellTypeConstants).count
((2. Divide that by 65 (which is the number of labels per sheet) and round at upper number. For example: if n=100, 100/65 = 1.54 so 2 sheets needed)) [maybe a useless thing to do]
[Assuming I only populate 2 cells]
If v is the row# in RecapTable,
If w is the column# in RecapTable,
If x is the row# in Etiq,
If y is the column# in Etiq,
v=1, w=1, x=1
[code].....
I have a spreadsheet which I need to populate the data from sheet based on current date. Cell C7 in the "Staff" tab needs to update from tab "Data" for John based on the current date . The current date is located in cell A3 in the "Staff" tab.
On daily basis, as I open the spreadsheet , cell C7 should update from the "Data" tab automatically based on the date in cell A3 in the "Staff" tab. Example, on January 4 2008, cell C7 should populate as 2 from the "Data" tab. I tried using the IF formula, but I cant expand the formula for the whole month of January since it is limited only to 7 arguments.
I need a fix to my macro that does not specify the sheet name. It needs to populate the active sheet. Here is my code.
Code:
Private Sub OKButton_Click()
Dim NextRow As Long
Sheets("Sheet1").Activate
' determine the next empty row
[Code]....
I run this macro that populates 7 cells based on data in another sheet. It seems that every sheet that have formulas that point to this sheet are being stuck in in the screen updating somehow?
Basically when I press F9 to calculate or change any cell that makes the sheet calculate it has like a screen burn in of all the sheets that are being calculated. I have been able to use this as a workaround:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object)
Application.ScreenUpdating = True
End Sub
But I shouldn't have to do this and it slows it down as it runs through this specific code about 11 times for each sheet that is re-calculating. Something is getting stuck in memory or something that seems to be causing this issue. This is the code I am using and I am not selecting any cells or sheets, but it appears that when I walk through the code that an image of the sheet comes up on the screen? The code in red seems to be what is causing the issues, but I do not know why? I can pass the 2 workbooks along to someone so they can see the behavior if they would like? Just let me know.
Sub populateEmployeeData()
Dim srcWorkbook As Workbook
Dim foundEmployee As Range
Dim srcWorkbookName As String
srcWorkbookName = "XIP_Employee_Data_" & Left(ActiveSheet.Range("B9").Value, 31) & "_" & Format(ActiveSheet.Range("B10").Value, "MMMDDYYYY") & ".xlsx"
If IsWorkBookOpen(srcWorkbookName) Then..........................
Any way to have a formula populate certain data from one sheet into another sheet...for all records in the data sheet.
I have thousands of individual locations that need to be separated by result into individual sheets.
So for instance:
In Sheet1 I have all the results as so:
location
date
chemical
result
error
A-1
1/1/2001
Aluminum
1.00
0.01
And in several other sheets I have a standard "form" set up for the way it is to appear in a report.
So, on the 'form' in Sheet2: the location of 'A-1' will have to populate in cell B6; Time of '1/1/2001' in E6; Chemical 'Aluminum' in A17; Result of '1.00' in B17; error of '0.01' in B24.
i'm having a hard time with trying to populate data from a userform to a specific column under a specific sheet. I've attached the file if you want to look at it. The file is basically a exam type with user logging and auto score computing.
The file is made of 6 sheets, 1st sheet is the log-in page where takers are required to enter their ID number and last name. 3 sheets of dummy test items, an Admin sheet that computes the score per test item and Database which I'm trying to compile all data in one column.
What I'm trying to do is that when they enter their ID and Last Name and then answer the 3 tests, they will be recorded in the database sheet in 1 column containg their ID, name and all the test results so that checking,grading and identifying who took the test would be easy.
So far I think I've done the part for the scores but I can't seem to get the userform for emp# and last name to populate on the field marked in the database.
I am trying to populate a blank sheet with data from multiple sheets given a certain condition.
Scenario: I have multiple columns on each sheet, but only three of interest to me. The first column has a header "Part ID", the second column header is "Description", the third column header is "QTY". I want to pull the data from all three columns to the new sheet when the QTY for that column IS NOT 0. The three columns of interest are always in Column A, B, and C.
The only thing that may make it tricky is that the data doesn't necessarily start on the first row of each sheet. For example, the headers for the first sheet are on row 17, and the headers for the second sheet are on row 5. So on and so forth...
I have a userform with a multi select listbox and 7 textboxes and a sheet with all the data on called "Metdata"
See "Metadata" sheet data below:
I want to:
1. Populate the Listbox1 with the data from column A, which starting at cell A3 and down until cell/row is blank. In the example "Metadata" sheet below I only two rows are present but that will increase to 200+ rows.
listbox1 = data from column A starting A3.
2. When the user selects a single item in the listbox1, I want the 6 textboxes to be populated with the data from the other columns related to the row selected as follows:
textbox1 = column B - starting cell B3
textbox2 = column C - starting cell B3
textbox3 = column D - starting cell B3
textbox4 = column E - starting cell B3
textbox5 = column F - starting cell B3
textbox6 = column G - starting cell B3
Every time the user changes the item selected in the listbox1, I want the textboxes to be populated with the data from the corresponding row selected.
3. When the user selects more that one item from the listbox I want all the textboxes to be locked = true and textbox7 = "Multiple files Selected"
Obviously when a single selection is made from listbox1 that all textboxes are unlocked for use....
I made a button in excel that when pressed automatically pops up a outlook email window with the excel file attached to it and written information that i want in the emal.
is it possible for me to have data from certain cells in excel populate automatically in the outlook email when i press the button to have the email popup?
what i would do is have certain words from some cells in excel fill in some blanks in a paragraph i have in the email that pops up when i press a button in excel is this possible of so how can i do it?
i am trying to say i will paste the VB code i have that allows me to have outlook email pop up with information i have in the email....
creating an Excel invoice that would auto-populate from another Excel worksheet or file with data. The information that I would want to include are:
Company name
Name (person)
Email address
Start date
End date
Promotion description
Number sold
Price per item
Total charged
I have an Access table which has following fields:
ScanDate Number DataType
Type Number
Type1 Number
Type2 Number
BatchNo Number
Cases Number
Pages Number
Now I have a useform in Excel so that when the user selects the Date from the combobox then it should check for total batch numbers (Count(BatchNo)), total cases (Sum(Cases)),Total Pages(Sum(Pages)) where ScanDate= Date from the combobox group by Queue Number. The Queue Number consist of Type+Type1+Type2.
See attached the Excelsheet where the data should be populated to. WBCount.xls
I am trying to sort a table of data by "Status" and automatically populate another Sheet. In Sheet 1, I have data as follows:
Issue Status Issue - 1 Open Issue - 2 Closed Issue - 3 Closed Issue - 4 Open Issue - 5 Closed Issue - 6 Open
I want Sheet 2 to automatically sort this information by Status = "Open".
Issue Status Issue - 1 Open Issue - 4 Open Issue - 6 Open
How I can accomplish this by Excel functions (I do not want to use Pivot table)?
I'm trying to make a spreadsheet that can be used to easily build a collective list of steps, for a user to read and follow line-by-line.
I want a source sheet of "steps" that I can change over time, and the resulting tabs that reference the source sheet get updated/populated automatically.
I've pieced together some VBA code from other sources, which kind of does what I want it to:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 1 And Target.Column = 1 Then
Dim SourceSheet As Worksheet
Set SourceSheet = ActiveWorkbook.Sheets("Steps")
Dim TargetSheet As Worksheet
Set TargetSheet = Target.Worksheet
Dim c As Integer
Dim Source As Range
[Code]...
But there are some problems:
1) The data auto-populates into a row. It would read better if each step was in the same column, meaning rows would need to be automatically added upon selecting something from the drop-down list. The number of rows that need to be added vary based on the number of steps in the source sheet, for the selection made from the drop-down list.
2) If you make a change to the source sheet, my goal is to have the other sheets referencing the source sheet's lists of steps update automatically, so you only need to update the steps in one spot and everything you've built from them gets updated instantly. Currently, you must select a different choice from the drop-down list, and then change it back, before it populates the "new" steps from the source sheet.
This is my first time using VBA.
What I have so far is attached: testAutoPopulate.xlsm
Please see attached the Workbook. I need to check the policy Numbers in Column A to be present in Access Table. If yes then write the corresponding ScanDate and BatchNo in columns I and J.
Sun Project.xls
with the attached spreadsheet?
I want to populate "selections" sheet with data from the previous sheet (it will be the date) depending on the value of a cell in column G. You will see I have already got the data from 27th April into my selections sheet but wondered if it can be done by a formula to save me copy and paste time?
refer to attached file.
I have monthly sheet Jan,Feb,Mar.....Dec.
I also have Summary Sheet, Cell A85:C96 is labeled as Jan,Feb.....Dec (Vertical) Cell B84:E84 refers to Store1,Store2,Store3 and Store4.
I need a formula to summarize the monthly value for each storein row 60.
I am trying to auto populate one spreadsheet from a master sheet
What I am trying to do: I have a master sheet where information on 25 countries is entered. Sheet has multiple columns for data entry I have 25 additional identical spreadsheets that correspond to one of the 25 countries so can drill down to country specifics
From the master - is it possible to select a country from a drop down menu so when I start entering data on the master it auto populates the corresponding sheet by the country selected.
I have a spreadsheet (Sheet A) with various data and checkboxes that I want to populate based on data in another spreadsheet (Sheet B). Sheet B has various fields with yes/no answers in the cells. I need to take this data and check varius check boxes in Sheet A based on the answers. I think this is possible if I write a macro to sweep through Sheet A to populate everything, but I was wondering if there is an easier way?
I would think there would be a way to set the initial state of a checkbox based on the value of a cell, but I can't seem to find a way to do it.
I have a userform in my workbook with a button to access it on twenty different sheets in the workbook. Currently the userform will only populate the sheet titled "Blank1". How can I change it so it will populate the active sheet without naming it? So no matter what sheet I'm on when I hit the submit button the userform will populate only the sheet I selected the button on? See macro below.
Code:
Private Sub OKButton_Click()
Dim NextRow As Long
Sheets("Blank1").Activate
' Unprotect Sheet
ActiveSheet.Unprotect
[Code] ..........
I would like the values on sheet 2 to populate on sheet 1, my guess would be a hlookup. I would like to use the acct# as the lookup value and then return the appropriate values ..
Example for acct #1002217, I want to lookup on sheet 2 the value associated with LI03 (cell D6) to come back in sheet 1 and insert in the appropriate cell (cell F4)
See this link ...
http://spreadsheets.google.com/pub?k...vdd_zO8g&gid=0
I'm trying to figure out a way to populate rows from "Count" sheet to "Recount" sheet based off of the Difference column (Count,G) of Item Number "A" multiplied by the Item Price column (SAP,H) of Item Number "A".
So, IF [(Count,G)(SAP,H) > "X"] THEN (populate Row Item Number "A" to "Recount")
inventorySAMPLE.xlsx
how I populate a form with values from a row in my excel sheet that i selected in a multicolumn textbox.
My "tool" works like this... The user opens the excel file and can choose one of two buttons, Add defect and Find defect. When the Add button is clicked Form1 is opened and the user fills in a number of fields which are then inserted into an excel sheet (same book though). Then there's the Find button. When the user clicks this button Form2 opens with a multicolumn textbox that displays some of the columns with some of the previously inserted information. Now I would like to be able to select one row and get Form1 populated with the values for that particular row. The user should then be able to change some of the values and the changes should be inserted back into the correct row in my excel sheet. How in the world do I do this??? Right now I just open my Form1 when I select a row and click an OK button. How do I get the values from my excel sheet back into my fields?I've tried to copy code from an example I found, but I can't get it to work.
My first form where I add my data
Private Sub UserForm1_Initialize()
Dim rIds As Range
Dim MaxId As Long
Set rIds = Worksheets("Systemtest").Range(Cells(1, 1), Cells(Rows.Count, 1).End(xlUp))
MaxId = Application.WorksheetFunction.Max(rIds)
With Me
.IdBox.Value = MaxId
I have 2 sheets in my workbook "Master Sheet" and "Weekly". The "Master Sheet" contains Parcel Numbers and the groups they belong to, this information will rarely change. The "Weekly" sheet contains data that is pulled from a report weekly. It has 4 columns, the "Parcel Number", the "Parcel Name" the "Availability" of that parcel, and the "Group" the parcel belongs to.
I want to create a macro assigned to a button then when pressed looks at the number in the "Weekly" sheet and searches for it in the "Master Sheet" and populates the corresponding "Group" cell in the "Weekly" sheet with the value it finds in the "Master Sheet". I have attached a sheet that shows an example of what I need.
