I'm using the attached sheet to try and perform the following:
Search the range "ADPeriod" for the value shown in cell in B2, andSearch the range "ADPName" for the value in the cell C4, andSearch the range "ADPLOB" for the value in the rows of column B,Where all three are found,Count the number of unique values in the range "ADSName" and enter the value in the applicable rows in column C of the table, thenSum the associated value in the range "ADFTE" and place in the respective row in column D of the table.
I've done quite a bit of research on this, and found a example as shown below, which I thought I could adapt, but I've come across difficulties when doing so.
[Code] .....
How I may achieve this. In the near future, I will be adding further values in row C of the table.
In attached File, there is a table there is date in COLUMN "G" and column "H" contain Name....
I want to count value in column "L" by matching date from column " K " .....BUT THE SAME NAME SHOULD NOT BE REPEAT COUNT... i.e, HITENDRA and RITU name is repeat 2 times in date 1-Jul-2014 .. but it is a similar so it should count as a "1"..... the total count for the day is "6" but avoiding similar value the total count is "4"..... so I nead a "4" figure as a result......
I need couple of formulas, Both formulas are on the "invoice approval" sheet which pulls details from others sheets.
Formula 1 - highlighted in red.
On the "Invoice Approval" sheet I would like data pulled into it from the "Vendor Invoice sheet".
I have an index and match formula which is nearly working but I would it amended slightly so that it doesn't error out when there is blank data on the vendor invoice sheet. Is there any way I can get it to say count the number of rows on the "Vendor Invoice" sheet and only pull in data for that many rows?
Formula 2 - highlighted in blue
On the "Invoice Approval" sheet I would like data pulled into it from the "fault report sheet".
I have a simple index and match formula but I can not get it to pull the data correctly - is my range wrong?
In one sheet I have customer_code in one sheet (Customer_code) and this is multiple like
C00002604,C00002604,C00002604 and in another sheet (Customer_code_details)
I have the same code but here the count us much more than earlier sheet (Customer_code). if Customer code exists the same code 3 times the same code exists also in sheet (Customer_code_details) for 5 times.
In customer_code sheet I have 8724 data but Customer_code_details sheet I have 8840 data.
I am normally sorted the two columns and checking t manually.
I'm looking for another twisted forumla / array. Here's what I'm trying to do?
When the value in data!G$2:G$51000 = Yes AND The value in data!J$2:J$51000 is Unique (counted once if more than 1 total matches) AND The value in data!H$2:H$51000 is
I'm trying find a way when running a report that continues to grow weekly - to either run with a script or a specific formula. There's certain cells that I'm trying to capture but the main thing is it's very time consuming and is tracked onto a separate workbook. Here's what I'm looking for a hand on:
Weekly list of 20,000+ rows - includes customer information - names, addresses, phone, account #, order #, etc I sort my list by address and then look and manually count the duplicates. Once duplicates are located I enter on a separate workbook along with the most recent order number. There has to be a faster way.
In Cell AA8, I need a formula that will read the 3-digit number in Col Z8 and count the number of rows where a match is found. The 3-digit number can be in any form, Ex Cell Z8, 972 can be 729,279.
************************************************************************>Microsoft Excel - Tic-Tac-Toe -1 +1.xlsx___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutZ8Z9Z10Z11Z12Z13Z14Z15Z16=VWXYZAA811/18/089729727911/17/0843143141011/16/0836036041111/15/0870670611211/14/08067067 1311/13/08143143 1411/12/08603603 1511/11/08729729 1611/10/08534534 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
My table has one column C with 3 possible values. Column D has either TRUE or FALSE. I am trying to count individually all the times when B = True (F4), T=TRUE (F5) and B/T =TRUE (F6) excluding the blank cells.
But the final goal is to display the total figure required to be answered, but as each question is answered yes or no subtract 1 from the displayed figure. My sumproduct adds up the "B" but does not match with a "TRUE"
I am trying to produce a excel spreadsheet on Excel 2003 that has sales data. At the end I am to produce where my supervisor can produce a summary of the data showing the last weeks work (and only the last weeks) and how many yes rows there were and how many no rows there were for that week. There is a lot more data involved but the only relevant data for the problem I have is the date and Yes/No fields. I have looked on other sites and the only thing that I can find that is close is the following formulas.
Apparently these will count the rows and sum them. However they don't differentuate between yes and no. I have attached a very basic spreadsheet with the problem.
I am analyzing a quota schedule. I need to count the cells in a row until I hit a value in one of the cells in that row (lets say cell>=30). Then I want the formula to evaluate the next two cells in front of that cell to determine if either is >=30, if so then the formula counts up to the original cell. This will determine # of days out for a install or trouble call lets say.
I have messed with a combination of IF, CountIF, and Match statements and just seem to hit a dead end. Any thoughts, even if it is that I may need another approach, is welcome.
Below i have example table in which Cells B2:G4 have draw numbers. In Cells I2:X4 I have numbers in 3 groups, Group start with small number and finish with highest number.
For example in row 2 first groups is 5 to 36, second group is 10 to 30 and third group is 4 to 41 and continue same for rest rows ....
Need a formula in M2 that will count the number of digits that match in each row. The digits in H:L compared to the master list in A:A119766. The count will be from 0-5 for each row. The digits must be in same column....
I have a problem finding the correct formula for counting matches with conditions between 2 non-equal ranges in Excel. The sheet is a try at making a working schedule template a bit automated.
For Week 1 each cell in the H16:H25 has a drop-down list (originating from BD30:BD50) where a work position can be chosen. The fixed list in BD30:BD50 starts with “<<SELECT>>” which is the default choice for the cells in H16:H25, and then “HOLD” before continuing with various work position names. K16:K25 is shift number 1 on Monday, L16:25 is shift 2 on Monday, and so on until Shift number 6. Then the rest of the days of the week follow (each with 6 shifts). Monday through Sunday (with 6 shifts for each) ranges over K16:AZ25. In the cells in K16:AZ25 the following can be entered: “x” (work), “o”(off), “-“ (leave).
The issue is the formula in each of the K26:AZ26 cells which are to total each of the shift columns . I want to count all the “x” in each column, but ONLY if the positions chosen in H16:H25 matches one of the positions in the list in BD30:BD50. NOT if a cell in H16:H25 displays “<<SELECT>>” or “HOLD” (even if it has a “x” entered in one of the Shift cells).
I need some code to search "database" sheet column B:B for value "SearchString" and then either select the cell (0, 86) to the right or count the rows so I can move the the cell in the correct row.
I've been trying to edit my index formula to only count an order number once even if the criteria for that result appear more than once. Attachment 324723
From the highlighted cells at B17 to B19, while using some kind of lookup or indexing method, I want to count the number of cells in that specific range that's great than zero. This list is just a sample, the list will be much bigger and order may not be the same--that's why I need to lookup the project name.
I have the following data in a number of cells and I would like to perform a count on match if a team has won, drawn or lost
Nottinghamshire beat Derbyshire by by 53 runs Lancashire beat Yorkshire by 30 runs Durham beat Leicestershire by 8 wickets Midlands/West/Wales Worcestershire v Warwickshire - No result (Match abandoned) Gloucestershire beat Somerset by 8 wickets
I'm trying to Count the number of Entries on a Sheet that match an Hour. Looking through the availiable functions i found COUNTIFS, which is exactly what I want. However, when I try to compare the Hour values within the COUNTIFS arguments, there is an error.
This is the function that I figured would work here: =COUNTIFS(HOUR(Sheet1!G:G), HOUR(E6))
which should count all entries in column G where its HOUR matches the HOUR in E6 (all are time format). I do realize that in the example above there is only one comparison made and i'm using COUNTIFS instead of COUNTIF, but i'll be adding other comparisons to it once i get this first comparison working.
So I am putting togther a process matrix template for a Value stream analysis. I would use brute for and simple tricks to make this work but I am handing it off in two weeks to a student and I want this to be as strait forward and as easy to use as possible.
The first worksheet has a list of about 180 machines running vertically, and enough space for 20-50 part numbers to plugged in running horizontally across the top. The next three worksheets have the machines organized and grouped together by processes. I planned to use an Index-Match such as =INDEX('Individual Machines'!D$6:D$194,MATCH("Drill 1",'Individual Machines'!$C$6:$C$194,0))
The goal would be to get the user manually fill in the first worksheet, and then allow the user to use the vertical autofill function to fill in data on the later worksheets. This would provide a flexible template that can be re-used for different and various product families.
So populate something like this with a downward autofill for the number of times the part# hits a machine.
i am looking to create a small table from the attached worksheet that will show how many users there are for 3 different locations, the user names are in column a and the locations in column c. the thing is, the actual worksheet i am using in work contains almost 1000 lines, and is being updated daily, there can be multiple entries for a person for projects etc.. and someone can even be in the availability and pto area's without being in the main project area. each resource can only be on one location so that will not change.
also, there can be blank cells for resource which should not be counted. i was wondering if there was a formula or a macro that would count the distinct number of names and reference them to the location and give a count of resources by location?
I use the standard OFFSET-COUNT-MATCH method to create dynamic named ranges in my Excel projects. Needless to say, this method won't work on a spreadsheet with formulas extending beyond the current range. The count function counts the cells containing formulas, even though they may contain no data. Does anyone know how to construct a formula that will IGNORE the "formula only" cells??
I need to count the number of unique companies that receive money within a specific QTR. I have made this simple example, I have a Table called Awards, with Headings for DATE, QTR, Company, Awarded, on one worksheet, that I need to feed the data into a summary on another worksheet. What formula using table heading can I use to achieve the answer 3 unique companies for Q1-13.
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
Where H1 contains the word Assigned. I need to also find and add to count for matches in I1,J1 and K1 which contain New, Pending and Work in Progress respectively.
