Paste Area Too Large
Jun 7, 2007
i am trying to first of all find the column that Alias appears in the first 3 rows and then paste that entire column to a new sheet.
most is working.
however i get an error 1004 saying the area i am pasting to is not large enough or the wrong shape.
Private Sub CommandButton5_Click()
'
' merge Macro
' Macro recorded 6/7/2007 by Ray O'Connell
Range("A1:K3").Select
With Selection
.VerticalAlignment = xlBottom
.WrapText = False
.Orientation = 0
.AddIndent = False
.ShrinkToFit = False
.MergeCells = False...........
View 9 Replies
ADVERTISEMENT
Feb 28, 2007
Can a scroll area be locked at any size using VBA code? I am able to lock area A1:J20 in the Private Module of a worksheet but nothing larger.
View 6 Replies
View Related
Feb 28, 2012
I am trying to dynamically set my print area and page breaks on a large sheet.
Basically I want to get the last column and last row in used in the sheet. And to create boxes (24x30) until I get all the way horizontally and vertically.
View 2 Replies
View Related
Nov 25, 2012
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
View 2 Replies
View Related
Mar 18, 2014
I have a workbook that users can make changes to a simple table and when they push a "Save" button the raw data in the back end is filtered and overwritten with their change. I only want them to change part of the raw data that has been filtered, starting in column G.
I have everything built and working up to selecting the filtered row column G where I want to paste. Their changed data is copied, the raw data filter's on a unique ID and then I'm stuck!
I have this code in there now however it's forgetting I want the visible entry not row 2:
FilterRange.SpecialCells(xlCellTypeVisible).Offset(1, 7).Cells.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
View 1 Replies
View Related
Jan 9, 2012
I have a data of a large no. of rows with 5 columns. The last 2 columns are district and state. As it is an imported data, in some rows the data has shifted a column, i.e. the name of state is being shown in district column and name of district is being shown in the column to its left. I tried filtering the data such that it shows only those rows where names of the states are coming under district columns and then selecting the whole thing, cutting it and pasting it to the rightmost column. But even the correct district entries got pasted under state column. Undo, the further damage was controlled, but the original problem remains. Now i will have to cut and paste each row or only consecutive rows.
View 2 Replies
View Related
Jun 26, 2014
I'm trying to paste the column that my code found into the blank cell C18, which may change in the future, but I got an error that I need to select the cell to paste the column to - I'm not getting the code right. Here's what I've tried:
For Each Cell In Sheets("Total Sell Dollars").Range("1:1")
If Cell.Value Like "2014*" Then
BlankRow = Sheets("Total Sell Dollars").Range("C" & Rows.Count).End(xlUp)
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1).Select.Paste
Sheets("Total Sell Dollars").Select
End If
Next
When I run this:
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1).Select.Paste
line gets highlighted and it says:
"Run Time error '424': Object Required"
This is the code that I tried when I got the paste error:
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1)
and the error was: Run-time error '1004'
We can't paste because the Copy area and paste area aren't the same size.
Try one of the following:
Click one cell, then paste.
Select a rectangle that's the same size, then paste.
Once I paste the column that excel found, I want to go to the next column and paste the found column into the cell C19 - which may change in the future and so on until all the found columns with 2014 in them are pasted.
View 9 Replies
View Related
Apr 1, 2014
I have a report that runs, and it shows users that are in different groups. Within each group are primary users, and sometimes secondary users. Attached is a spreadsheet showing an example of the report in "A7:A52"
What I want to do is have a macro scan column A, and if a group is found, create what I have made in the rest of the spreadsheet (CD6 and below). I manually filled in the data for group 1, and would like it to continue off to the right in the same format.
There are some areas that dont have groups, such as there might be group 1, group 2, and then nothing till group 10 (as shown in the example)
View 12 Replies
View Related
Dec 18, 2011
I am trying to create an operational dashboard and I have some List Boxes for which I am preparing the data. The Dashboard is separare worksheet and the calculations are done in several additional sheets. The results, based on the chosen values, are updated in the Dashboard sheet in an area starting with column AO and can be like $AO$4:$BR$37, then $CA$4:$DD$37, and so on: total 6 or seven areas.
I would like to paste one area at the time (with all formats, including font, values, borders, merged cells, etc.) into the “physical” dashboard – the visual area on the screen. I do not want to make this operation manually; shall be automatically.
View 4 Replies
View Related
Apr 7, 2014
I have a conversion chart of decimals to fractions I made in Excel. I want to copy and paste as an image so I can shrink it to fit at the top with the frozen headings.
I tried to take a picture of it on the monitor, but the photo captures the screen fuzzy pixels.
I tried to copy and paste but could not find where I could paste as a special attribute. Or a picture on the internet with the decimal first and the fraction second in 1/16ths
View 3 Replies
View Related
Jan 5, 2009
I'm having a little bit of trouble with my code. I basically need to copy-paste special a large workbook (50 worksheets) into a new range-valued workbook. I've defined Sheet as S, but in some instances when I use the variable "S" I received a runtime error 1004.
Please see the highlighted red "S" in the code below.
Also, if one knew of an easier method for this particular operation that would be great!
Sub PasteSpecial()
Dim W As Workbook
Dim S1 As Worksheet
Dim S As Sheets
Set W = Workbooks("newfile2")
Set S1 = W.Worksheets("Sheet1")
Set S = Sheets
S(Array("Sheet1", "Sheet2", "Sheet3")).Select
S1.Activate
S(Array("Sheet1", "Sheet2", "Sheet3")).Copy
Cells.Select
Range("a1").Activate
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Paste:=XlPasteFormat
S("Sheet2").Select
Cells.Select
Selection.PasteSpecial Paste:=xlPasteValues, Paste:=XlPasteFormat
S("Sheet3").Select
Cells.Select
Selection.PasteSpecial Paste:=xlPasteValues, Paste:=XlPasteFormat
MsgBox "New Range-Valued Workbook has been created"
Application.CutCopyMode = False
End Sub
View 9 Replies
View Related
Apr 16, 2008
I'm working in a rather large (20meg) Excel file with multiple worksheets, references, formatting, etc.
Suddenly, when I attempt to Copy > Paste Special > Formats using more than a few cells at a time, I receive this error message...
"Selection is too large."
That's it - no reference, no nothing. Doesn't matter if I select a few cells, or entire rows, I get the same message everytime. However, I can copy-n-paste the entire 8000+ rows of data into a NEW file with no problems whatsoever. It handles everything - data, formatting, formulas, etc. But within my working file (same worksheet even) I get the error everytime.
I'm not using a macro. This file has worked fine for months. I'm doing absolutely nothing differently than ever before. This error literally just started today.
I know there is some issue with copy/paste of 8100+ non-contiguos cells, but I'm using contiguos cells. And again, I can copy nearly 10K entire rows of data and paste into a new workbook - just not within the same workbook and worksheet.
I've searched online - here, Mr.Excel, Microsoft, everywhere I can think of. Of all the problems I've found answers too, I have yet to find ANYTHING dealing with this problem - except in the context of a macro, which I am not using.
View 9 Replies
View Related
Jan 20, 2007
I would like to select cell A6 after pasting a large range so that when send to user the entire range is not selected. I tried
wsDestPage.Range("A6").Select
And
wsDestPage.[a6].Select
I receive
Select method of range class failed
How can I select a single cell after pasting the large range?
View 5 Replies
View Related
Dec 2, 2013
Recently, when trying to copy and paste portions of excel worksheets, I've been getting the message: The picture is too large and will be truncated.
I have copied and pasted this same way for years and the problem has just arisen over the past month. An excel issue or possibly something else and just getting the message with Excel since it's the software I'm using 90% of every day?
My files are stored on a network drive, not my hard drive.
View 2 Replies
View Related
Aug 29, 2008
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
View 4 Replies
View Related
Apr 11, 2013
How can I print 2 selected area (highlighted area). I know there is a trick to do that. Right now I can only select (highlight) one area to print, but would like to know how to print 2 or more areas at same time
View 7 Replies
View Related
Aug 6, 2003
I've got a 80 Mb CSV file and would like to open and work with it. Too many lines (90000 or so).
Is there a way to split ( ) this file so I can open two files instead?
View 9 Replies
View Related
Feb 25, 2009
Using Excel 2003 I am trying to write a macro to set the print area according to the amount of data in a particular range of cells. I find I can include this instruction
View 2 Replies
View Related
Nov 1, 2006
I am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
View 3 Replies
View Related
Feb 12, 2013
I have a workbook with multiple sheets that I need to print.
Is there a way to create a fixed print area within which you can mess around with formatting without extending or shrinking the print area?
I have tried adjusting the margins settings so that they are all the same, but this does nothing to keep a fixed print area.
View 1 Replies
View Related
Mar 24, 2014
i want to do a sum of values, based on 2 criterias, one is that it has to match the name, and it has to match another criteria say "Y" in this matter.
in one sheet i have
row 1 to 100, column a:
list of names of people
row 1 to 100 column b:
list of "Y" or "N"
in row 200+, column a:
list of names of people
in row 200+, column b:
values
I need to sum the values in column b, if the name in row 1-100 is the same as row 200+, and the criteria is "Y" for that particular person, as indicated in column b row 1-100.
View 2 Replies
View Related
Nov 9, 2006
I have a sheet that will be about 5 pages long if printed. To minimize wasted ink and paper, using VB I would like to be able to have it only print the portion uses (data entered) along with a section at the top and bottom. The section at the top would print on the top of the first page and the section at the bottom would print on the last page.
I know I could record a macro to select an area and print that but it would not do what I am trying to accomplish.
View 14 Replies
View Related
Jan 30, 2009
1)I am trying to specify the area of a worksheet, for example columns a-z and rows 1-1000 but I am having great difficulty in doing this. I have tried selecting the last row and shift>end>down, Edit >all then Edit>delete but nothing happens. The screen just flickers and all the rows are still there. Even specifying the print area does not do it. Any answers?
2) Any ideas how to sum a datalist by text in a box? I.e if there are 1000 rows selected how amny are filled. If there is a way of selecting 'any text' this would work but there is no constant value/text to use.
BTW I am using Excel 2000
View 6 Replies
View Related
Jul 18, 2012
I have an excel sheet with lots of rows (it goes up to BAA) I would like to be able to print certain parts with a VBA
for instance if Sales is selected from a drop down (lets say A1) the macro will print
Area : C7:Z500
Scaling: fit to 1 page
Orientation: landscape
Color: Color
or if Sales next year is selected
Area : C7:D7 AA7:AZ500
Scaling: fit to 1 page
Orientation: landscape
Color: Color
etc....
View 9 Replies
View Related
Oct 2, 2007
I use the code below to print a portion of a sheet. My problem is that the area always changes. The $A$476 should be the first cell in that column that contains "HEA" The "536" in $F$536 is the last row that contains data. There are conditional formats all the way down to row 1,000 but not data
Private Sub CommandButton1_Click()
Dim strCurrentPrinter As String, strNetworkPrinter As String
****strNetworkPrinter = GetFullNetworkPrinterName("Adobe PDF")
****If Len(strNetworkPrinter) > 0 Then ' found the network printer
********strCurrentPrinter = Application.ActivePrinter
********' change to the network printer
********Application.ActivePrinter = strNetworkPrinter
********ActiveSheet.PageSetup.PrintArea = "$A$476:$F$536"
********ActiveSheet.PrintOut** 'print something
********' change back to the previously active printer
********Application.ActivePrinter = strCurrentPrinter
********ActiveSheet.PageSetup.PrintArea = ""
****End If
End Sub
Obviously there is a function also that finds the full network printer name, I didn't think it was important, because my issue is the print area. Everything else works fine. If you need it let me know and I will post it.
View 5 Replies
View Related
May 1, 2008
I have a list of tons of items that have lost orders against them. The items themselves are catagorized in 11 different areas and I'm trying to find the top 3 of each Area. These items are sorted descending by the number of lost orders and will constantly be changing every day. Here is an example of how my workbook is set-up:
A B C D E ....
View 9 Replies
View Related
Dec 29, 2008
I have the following macro that works fine. But, I would like it to stop when it gets to the bottom of the active area.
Sub Insert_for_SQs()
Do
Selection.EntireRow.Insert
ActiveCell.Offset(6, 0).EntireRow.Activate
Selection.EntireRow.Insert
ActiveCell.Offset(12, 0).EntireRow.Activate
Loop
End Sub
View 9 Replies
View Related
Feb 18, 2007
Looking for a macro that will set the print area on an accounts spreadsheet to the last non blank row, bearing in mind that all the rows contain formulas, have tried some macros but they assume the cells with formulas in them are non blank
View 4 Replies
View Related
Oct 7, 2012
Goal is to select range from active cell ( where coursos is ) to the top of that row. For some reason
ActiveSheet.PageSetup.PrintArea = Range("xey1":ActiveCell())
Does not work?
View 3 Replies
View Related
Feb 6, 2014
Making a macro that selects active cells (so anything with text in) and sets that as the print area.
Using the default builder I have:
Range("A1:AA44").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveWindow.SmallScroll Down:=30
Range(Selection, Selection.End(xlUp)).Select
Range("A1:AA692").Select
ActiveSheet.PageSetup.PrintArea = "$A$1:$AH$692"
[Code]...
Can trim this code with something
Range("any containing data").Select
ActiveSheet.PageSetup.PrintArea = "selection"
View 1 Replies
View Related