Count # Of Cells Minus Red Cells VBA

Aug 18, 2009

I have tried to figure out how to count all cells in a column and subtract any cells that contain characters with a red font. I'll attach an example. I need code that will work in VBA so that in the case that the column does not contain any cells with red numbers it won't come up with a debug error.

In excel I normally do this manually with this formula: =count("") I normally highlight all cells except the red ones. See attachment for example.

Also, the # of rows is never the same. Some files will be 100 rows, some will be 1000, depending on the store's file we get. so the code would probably have to contain something like .lastactiverow or something.

View 4 Replies


ADVERTISEMENT

Compare Two Cells But Accept Them As Equal Is One Is Plus/minus 0.1

Jun 10, 2009

I'm trying to create a formula where I can compare two cells but accept them as equal is one is plus/minus 0.1.

Example:
Cell A1 is 3, Cell A2 is 3.2, I want Cell A3 to turn red (or report "1")
Cell A1 is 3, Cell A2 is 3.1, I want Cell A3 to turn green (or report "0")

View 2 Replies View Related

Automatically Assigning Dates To Cells Minus Weekends

Feb 13, 2008

I have a spread sheet that is used to show the dates for the days in the week that my students are in class. I want it to be able to take the date from a cell that has the class start date and then show what the date will be for day 1, day 2, day 3, etc... I am not a beginner with excel but i can't figure out how to get it to skip calendar weekends.

View 9 Replies View Related

Count Cells Containing Dates (greater Than 2014) Based On Filtered Cells

Jun 24, 2014

I have spreadsheet with different 100s of columns of dates with 600 rows. The first row identifies which zone the data belongs to (North, South, East, West. NE, SW, SW1, etc...)

I want to write a formula to check how many dates in each column fall in 2015 or later years; This can be accomplished by writing a countifs formula.

Where it gets complicated is once i filter on the Zones;

I want the formula to give me the desired result - count of all CELLS where the year is 2015 or greater - WITH FILTERS ON.

I stumbled upon following sumproduct formula that gives count for visible cells, however when i apply the date criteria, i get incorrect result -

=SUMPRODUCT(SUBTOTAL(3,OFFSET(IJ3:IJ999,ROW(IJ3:IJ999)-MIN(ROW(IJ1:IJ999)),,1))*(IJ3:IJ999>DATE(2014,12,31)))

View 8 Replies View Related

Count Number Of Cells In Column Per Month Ignore Blank Cells?

Jan 13, 2014

I have this formula which is counting the number of cells in a column that fall within each calender month.

However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.

In my workbook, B/C:133 have a formula =""

I will need the formula in column E to work if there is a formula that yields a "" in column B and C.

View 5 Replies View Related

Countif Statement: Count The Number Of Cells That Have A Value Greater Than 0 In A Range Of Cells

Jun 23, 2009

How do I count the number of cells that have a value greater than 0 in a range of cells?

View 2 Replies View Related

Count Number Of Blank Cells In Range Starting And Ending Will Cells That Match String Values

May 13, 2013

I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.

I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?

The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.

View 5 Replies View Related

Count Unique Cells Based On Ajacent Cells Having Values

Jan 6, 2008

I have the following data in 1 of the tabs.

[TABLE]
ClassSequenceAB
10SE132422
20SE23212
20SE321
20SE23425
10SE332455
15SE132412
10SE234
[/TABLE]

I want a unique count of sequences in a different for that class only if that particular row in 'A' or 'B' is populated. The result set should be as follows:

[TABLE]
ClassAB
1032
1511
2012
[/TABLE]
Can this be achieved through a formula?

View 8 Replies View Related

Count Number Of Blank Cells Between 2 Cells Containing Data

Mar 29, 2014

Getting a formula or macro that count the number of blank cells between 2 cells with data (numbers) in 1 column. E.g.

1
Blank
Blank
2
Blank
Blank
Blank
3
...

In this case the blanks between 1 and 2, between 2 and 3 to be displayed in an adjacent column.

View 3 Replies View Related

When Starting Number Reaches Zero It Starts To Count In Minus

Mar 8, 2014

I am having trouble setting up my cycle count spread sheet. For instance if my starting number is 1000 and when it reaches 0 or below it starts to count in minus when I just want it to automatically reset to 1000

View 3 Replies View Related

2 Cells Match Count A Load Of Cells

Oct 3, 2013

Basically i need to work out if a3 matches one of the dates in column 1:1 i need it to calculate and give me the sum for the weekly total of b3, d3, f3, h3, j3, l3 and so on if column a4 matches one of the dates in column 1:1

Mon/02/09/13
Tue/03/09/13
Wed/04/09/13
Thu/05/09/13
Fri/06/09/13
Weekly Total

[Code] .......

View 8 Replies View Related

Count Non-blank Cells But Not Cells With ..

Apr 12, 2006

I am trying to create a dynamic chart with the offset and counta functions. I want to automate the data population and use formulas to get new data. I need to know how to use counta in the named ranges to not count cells with formulas that return "".

View 9 Replies View Related

Count The Cells Between Blank Cells

May 24, 2007

I have a column of continuous (no blanks) data in Column A and data with blanks in column B as shown below:

Col.A Col. B
ABC
1/1/01 .55
1/2/01 .66
1/3/01 .77
XYZ
2/1/01 .88
2/2/01 .99
2/3/01 .44
2/4/01 .23

I need either VBA or an Excel function to count the cells in column B between blank cells and put the result of this count in the (formerly) blank cell. For instance, 3 would show up next to ABC and 4 next to XYZ.

View 9 Replies View Related

Count Number Of Equal Cells With A Prefix In Col D And Insert Count In Col A?

Aug 7, 2013

I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.

Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.

Examples of the contents of cells in col D with the "Category:" prefix are as follows:

Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices

Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.

I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.

View 9 Replies View Related

Count If / Compare 2 Ranges And Count Where Cells In Same Row Differ

Apr 15, 2014

Column A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.

View 3 Replies View Related

Count Formula: Count Cells In Column That Are Graeter Than 160

Feb 5, 2010

I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.

View 4 Replies View Related

Loop To Count Cells Until Criteria Met Then Restart Count

Mar 7, 2012

ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales
23/6/2012 YES0NO 33/5/2012NO NO 43/4/2012NO NO 53/3/2012 YES2NO 63/2/2012NO NO 7 3/1/2012 YES1YES682/29/2012 YES0NO 92/28/2012NO NO 102/27/2012 YES1NO 112/26/2012 YES0NO 122/25/2012NO YES4

I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.

View 5 Replies View Related

Count One Cell And Then Count 52 Cells Later...

Feb 26, 2009

I'm a newbie to these forums, but I had a question that I couldn't find an answer to in the search feature. So, I joined and here I go....

I have a whole lotta data (nearly 600 "pages" of data) that I pasted into Excel. Unfortunately, it's formatted poorly and I'd like to make it nice and purty.

What I started to do was to create a 2nd sheet and then do an "=" and then click the spot with the 'group name' and then another "=" underneath it and then clicked the spot with the 'premium' info, etc.

After a couple of these, I figured that I could simply make a formula to help me out with it. Please see the attached screen captures for some detail on my issue.

Can someone help me create a formula or a way to count a certain cell and then 52 cells underneath it and display it?

View 6 Replies View Related

Cells.Rows.End(xlUp).Count - Insted Of - UsedRange.Rows.Count

Mar 24, 2008

I used Sheets(1).Cells(1, 1).Rows.End(xlUp).Count instead of UsedRange.Rows.Count in this code , but it didn't succed with me. Why and how to do that


Dim i As Long, j As Long
j = 1
For i = 1 To UsedRange.Rows.Count
Sheets(2).Cells(j, "a").Value = Sheets(1).Cells(i, "a").Value
Sheets(2).Cells(j, "b").Value = Sheets(1).Cells(i, "b").Value
Sheets(2).Cells(j, "c").Value = Sheets(1).Cells(i, "c").Value
j = j + 1
Next i
End Sub

View 9 Replies View Related

Count How Many Cells Have Something In Them

Apr 3, 2014

See attached. In A2:A6, 4 out of 5 cells have something in them. What formula do I put into A7 to read '4'?

autocounter.xlsx‎

View 4 Replies View Related

Count Cells That Are The Same

May 8, 2012

I have a file with 2 sheets on the master sheet I have the formula =COUNTIF(Sheet1!A:A,"=d2").

Sheet 1 contains a list of product codes, I want to count how many time the product code is listed in sheet 1 column A. on the master sheet column d list all the product codes.

But this formula did not work, if I type in the product code vs d2 it works?

View 2 Replies View Related

Count Cells After A Value?

Jan 30, 2014

In Cells A1:A1000 I have a number of values raging from "3000" - "6000"

In Cell B1 I have the calculation =MAX(A1:A120)
In Cell B2 I have the calculation =MAX(A2:A121)
In Cell B3 I have the calculation =MAX(A3:A122)

Etc etc so on so forth.

Assuming the Max Value in Cell B1 is located in cell A100 I want Cell C1 to count the number of cells after A100 up to A120.

So the Value should equal 20.

Then likewise for Cell C2 taking into account cells A2:A121 so on so forth

View 5 Replies View Related

Count Just Red Cells

Dec 13, 2007

Is it possbile to create a forumulae to count anything above 5 in red cells only

View 9 Replies View Related

Count Only Used Cells

Jul 23, 2006

Every day I copy data into an excel doc. I need to find a way of counting the columns used and displaying the amount in a seperate cell

View 3 Replies View Related

Count The Cells

Aug 28, 2006

count the Cells. refer to attached spreadsheet.

View 3 Replies View Related

Linking Cells Globally To Allow Users Ability To Change Cells On Separate Sheet / Cells?

Feb 18, 2014

I have a workbook that uses the values that a user had entered into 3 cells to calculate multiple other charts/diagrams on multiple sheets within the workbook. Each sheet would show what the user had entered in the 3 cells to allow them to see what is being used to calculate each table. Is it possible to link these cells so that the user can change the 3 values without having to go back to where he originally entered the 3 values?

For example, a user has entered in 3 values in Sheet 1. A formula in Sheet 2 displays what is entered by the user and uses these calls in Sheet 2 for calculations. When the user wants to change the three values, he would have to navigate to Sheet 1 and enter in the new values to have the workbook recalculate all the tables. Is there a way to link the three cells from Sheet 1 and Sheet 2 so when the user is on Sheet 2, he has the opportunity to change the values on the current Sheet without having to navigate to Sheet 1 to do so?

View 1 Replies View Related

Count Non-Populated Cells

Jul 23, 2014

Is it possible to count cells that all have a formula in them, but only count the cells that return a displayed result?

View 5 Replies View Related

How To Count Instances Of A Row Of Several Cells

Dec 13, 2013

Basically, I have a table with rows as person, and variables as features. If a person meets a feature, the that cell writes 'X', now, I hope to create a master variable that capture all the features, basically counting how many features a person has met. For example, Joe has three features; "have balls," "cool guy", "good with ladies". In the cell in question would be "X" "" "X". And if I count, then it should be 2.

View 1 Replies View Related

Count Cells And Give Different Value

Mar 28, 2014

I want to count a range of cells and if the value of those cells is 5 and over, i want it to give a 1 and if its under 5, i want it to give a 0. I've attached a file of what i'm after, row 13 is where the formula would go, i have just put in the values.

View 1 Replies View Related

Count Cells If They Contain A Month

Feb 10, 2009

I want to be able to count cells if they contain a certain month.

For example, say i had the following date and times

A
10/01/2009 09:30
10/01/2009 09:30
10/02/2009 09:30
10/03/2009 09:30
10/03/2009 09:30
10/09/2009 09:30
10/09/2009 09:30
10/09/2009 09:30
10/12/2009 09:30

How would i count how many are in the month of February?

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved