I need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.
I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.
Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?
I would like to put together a macro that would compare a list of part numbers against a database, and recommend alternative vendors for the part. The actual VBA I think I can handle, my problem is with the formula, array or whatever is needed to return the results I am looking for.
I have attached a sample workbook to this message that contains two worksheets. The "Sample Database" is an example of the format of the database (in Excel format) that I will be looking against. This data may be a hundred columns wide, and thousands of rows long.
The "Vendor Reference" worksheet shows an example of the data that would be returned if the "perfect" formula were entered into the cells. (I'll explain what I mean by "perfect" in a moment.) It also has an area designated for testing formulas to see what is returned. It's blank, because none of my tests returned anything but errors.
You will notice the column headings on the "Sample Database" worksheet. Columns A and B will always contain the part number and product description. The remaining columns will contain vendor specific data, with perhaps 25 different vendors, and 3 columns per vendor. These columns would be "PV", (for Primary Vendor), the vendor number, (010299, for example), and the Vend Part#.
If there is an asterisk, "*", under the "PV" column for that vendor, that means they are the "Primary" vendor. The cost from that vendor is listed under each vendor number. There may be instances where 2 different vendors are listed as primary. If that's the case, the formula can simply return the FIRST one found.
Here's what the "perfect" formula would return: .....
i have a worksheet that has information filled in columns A-N and rows 3-7262 (not including title and labels)
i need a macros that will separate this data into multiple worksheets based on the word in Column A; these words could be HDA, CCR/NHT, GRU/ATU (essentially dividing this data up by area name, there will be 14 worksheets)
i would also like to be able to update this master worksheet and have it be reflected in the multiple worksheets that are divided by their areas.
Im working with a huge amount of data in BOOK1.xls and once or twice a week I received an update of the list.
1. I need to compare and find out from the new updated worksheet if there is a new revision, and if there are new documents added to the list. I have tried Vlookup..but it didnt work for me. Ex. Doc1 has revision 1, 2 in my BOOK1 that I am working on. Note that there is a repetition of the DocName, Doc Number except for the revision.
I am trying to force users to enter data in 5 separate cells in a worksheet. I have tried editing code I have found here, but just can't get it to work.
It is in the second sheet of the workbook and the sheet is called Invoice - the cells I want to force entry into (and the message I need) are as follows.
J2 - You must enter the salesperson's name J4 - You must enter the customers name J5 - You must enter the customer's address J6 - You must enter the customer's postcode L2 - You must enter the Invoice number
Need to write the VBA code required to automatically add the names of the buyers & sellers as the auction info is entered on the Auction worksheet to the Transactions worksheet of the same workbook? Any member name should only appear once as this will be the list whereby we will generate the receipts by Location order when auction is finished.
I am attempting to place a formula in cell b3 in the attached spreadsheet on the "sheet to pull data into" tab 1 (cell is highlighted yellow) to retrieve value in the yellow highlighted cell in the "Sheet that contains data" which is on a seperate worksheet within the same workbook.
The cells highlighted red in the "sheet to pull into" tab (cells: a1, a3, b1, and b3) are the criteria that needs to be matched to those cells on "sheet that contains data" tab in order to ensure the value returned is correct.Sample of problem.xlsx <----see the attached sample spreadsheet.
I'm having an issue with adding data to word from excel through VBA.
I would like to add the Table to the word doc, then copy and paste data below it. The code works fine. However, after the table gets added to the top of the word doc, the rest of the stuff begins pasting from the top of the doc, causing the table to appear at the bottom...
I was hoping to force end users to use a user form to input data into a work sheet. The problem is that the form wont input the data when the sheet is protected.
I need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.
I would like to create a menu representing "tasks" where an amount of "time" can be designated per option for my employees to select and fill. I would like this information to then be tallied elsewhere so I can keep track of our efficiency.
So far, I've created a table where a "time" input is nested beside each "task" drop down menu, I would like these inputs to be added up underneath the same category on the budget tab.
For example: If I work Monday, Tuesday and Wednesday doing tiling.. I would like the budget to reflect those accumulated hours (throughout the week) nested under "tiling".
Here's the file, what I'm trying to accomplish [URL] ............
I have a spread sheet which totals the amounts in 2 columns D and E, which are pounds and pence. The formulas for each one are:
Pounds
=SUM(D3:D8)+ROUNDDOWN((SUM(E3:E8)/100),0)
Pence
=MOD(SUM(E3:E8),100)
These work very well and give me the correct figures.
What I would like to do is to add up the values of each row based on the criteria of column C and have just one value in ONE cell (as shown on lines 13 & 14), so for instance:
When added together the values of rows 3,4 & 6 are 7.25 (based on a value of "W")When added together the values of rows 7 & 8 are 5.00 (based on a value of "F")
I have tried to show this as an example in the image below:
I have a spreadsheet with 10 or more items that I would like to separate into their own worksheet. I'm thinking about a macro but I'm not sure about creating new worksheets in a macro.
I have a userform that I'm using to add data to a worksheet, with the following
Private Sub CommandButton1_Click() Dim OutSH As Worksheet Set OutSH = Sheets("Sheet1")
OutSH.Cells(nextrow2, 1).Value = Surname.Value OutSH.cells(nextrow2,2).value = ID.value OutSH.cells(nextrow2,3).value = Date.value ...... I need to ensure that duplicate entries are not made for the same person on the same date. The ID is unique to each person.
IF statement that can check for a duplicate and then come up with a dialouge box with some custom text, and then exiting the sub?
I have a workbook containing many different sheets. What I want to accomplish is when I click on a check box on one sheet, I want the check box in a different worksheet to be unchecked. I have form control checkboxes in my workbook, so I used xlOff as the value.
Using VBA, I am trying (without success) to copy the active worksheet of my workbook and save it in the current folder using a filename shown in cell A1. I only need to save values and formats. Any existing code (auto fit) contained withing the sheet would no longer be required. I get a VB project message relating to macros. I would anticipate saving as xlsx would deal with this but again, am at a loss.
One is named "Link Menu" . . . The other is "Setup"
I have an object on "Link Menu" that can be clicked to run a macro.
On the Setup sheet, I have a workable link that opens my email. Whatever link that the user would type into cell D6 on the Setup Sheet would be opened.
I want to beable to click my object on "Link Menu" and have the macro open the link from cell D6 on the Setup sheet.
I am trying to build a report based on data in a separate worksheet. The report must only show the name of the value and qty associated with it only if the qty is greater than 0.
As an example, the values can be colors.
Column A = Names of Colors: Red, Blue, Green, Yellow, Black Column B = Qty of each Color: 5,4,0,1,0
The report is held on a separate spreadsheet. I would like to only show the values that have qty's greater than 0, not any values that have a value of 0.
I need the information that is entered in a userform to be sent to a separate worksheet. Each time a user fills out the form, I would like the information to be documented on the next completely open row (ex. first form goes in row 2 (column headings are in row 1), second form goes in row 3, etc.). I don't know a ton when it comes to VBA, but I believe I have the code figured out to search for the next open row. Column A will always have data in it.:
Code: dim currentrow as range set currentrow=Range("A1").end(xldown).offset(1,0).entirerow)
What I can't figure out is how to insert the information to the correct columns. Each column has a header to it, and I would like the data from the userform to be put in the relevant column each time it is filled out.
For example, if column A's header was "First Name" and columm B's header was "Last Name", each time the form is filled out, I would like the first and last name (which was entered in the form) to be inserted into those columns (with each form entry on a separate row).
I think there might be a way to use the intersect method to find the row/column combination I'm looking for, but I'm not exactly sure how to do it. Using the first name example from above, it would basically look for the intersection of "currentrow" and column A, and insert the value that is entered into the userform.
I have read a number of posts and other sites and can create the hyperlink in the desired cell but get an error message to the effect, "Cannot open the workbook."
The current macro follows. I believe its description is made in the comment statements below the date-author comment.
Sub DecomposeCTQ() 'Decompose CTQ Macro '14Oct13 Charles T. Carroll' 'This macro copies the template to a new worksheet and takes data from the' ' active cell CTQ and makes it the parent CTQ on the new worksheet. Then' ' it renames the new worksheet with the active cell CTQ ID.' If ActiveCell.Column 2 Then MsgBox "You must be in the CTQ ID Column to run this program" GoTo Leave
I need to populate combo boxes from a list of data on a separate workbook. I set everything up then found out the way I did it the seperate workbook must be opened before the drop downs are populated with the information. Is there a way to not have the linked workbook open?
Also these workbooks are all contained in their own file that must be duplicated on to other machines and into other larger files. I need that linked information to always follow the workbook contained in the same file. Another words if I have the original file "A" and duplicate it and now have a file "B" I want the combo box in file B to be linked to the workbook in file B.
Is there a way to display multiple cells in a separate worksheet that are a part of multiple worksheets? Please see below.
Worksheet 1 has list of email addresses in column A Worksheet 2 has list of email addresses in column A
How to have Worksheet 3 display email addresses in column A that were on Worksheet 1 and Worksheet 2? Considering all duplicates are removed from each worksheet.
Worksheet 1 (column A) red blue green yellow
[Code]....
Need to have Worksheet 3 display as: (column A) red blue green
I have 10 tabs in a workbook, the first five tab is for 5 Departments for the Month of March, the other 5 is for the same 5 departments for the Month of April.
I want to compare a particular field for each Department for the two months. The field is in column N.
Is there a code that will copy column N for Finance March, Column N for April and paste them into another worksheet in the same workbook in Column A and B, then go to the next department HR and copy Column N for HR March and April and paste in the same worksheet where Finance already as in column D and E, then go to Operations March and April tabs and paste into the same worksheet as column Worksheet G and H.
Basically the copied columns are pasted March April next to each other for all the businesses in the new .
I am attempting to create a workbook that will keep an inventory of items in a catalog that I own and want to order (worksheet1). Ultimately an order form would be filled in(on worksheet2). I would like to have the entire row of data copied (from worksheet1)to the next open/empty row on the order form (worksheet2), if any cell in column C (worksheet1) has data.
I have attached the workbook : Catalog Orders.xlsx
Excel 2003: I need code that, when an "x" is entered in a cell in the "Activity" worksheet to assign a temporary unit #, it will look for the next available Temporary Unit # in the "Assign" worksheet. Then mark that unit # as "assigned" (by placing an "X" in the column next to it) and copy it to a cell in the "Activity" sheet.
I will be doing the same thing with assigning different types of PO numbers. I figure if I have the code for the Unit #, I can use the same logic for the other assignments, with some modifications, of course.
I've attached a sample workbook.
If I am not considering the most effective way to accomplish what I am trying to do here, I have no ego at all about someone suggesting a better solution.
