AutoFilter Fails To Filter On Numbers
Jul 2, 2008
I am experinacing some difficulty in using the Autofilter in the attached sheet. The workbook consisits of the following sheets:
Main
Contains a button taht crates data for sheet "Working Data" by filtering and formating data found in Raw Data sheet. The code behind it ain't preetty but it worsk. Raw data
Just as the name implies
Working Data
Filter and formated raw data. After the VB code behind the button on sheet Main runs, I Insert an Autofilter on the coluimns of Working data. on column I ( Length ) I try and filter for rows were the value in column I is >= 35. Nothing shows up. I know this is wrong, just by inspection. I can ask for rows were column I is = 35 and get 1 rows. I can ask for rows were column I is = 45 and get 1 rows.
in fact I have Raw Data that comprises about 2000 rows but had to chop it down to meat board size req'ts:>
View 2 Replies
ADVERTISEMENT
Jul 25, 2009
I m trying to use an Autofilter to filter my cells with a Number Filter of is greater of equal to 4 and is less than or equal to 5.
But as you can see I would like to customise is using a range of 2 values which i have specified in Cell P1 and Q1.
I manage to figure out how to reference to this cell, but Im not sure how can i put my ">=" and "<=" operators into my code so i can get it to work exactly how i want as shown in Code 1.
Code 1
Selection.AutoFilter
ActiveSheet.Range("$A$1:$K$118").AutoFilter Field:=6, Criteria1:=">=4", _
Operator:=xlAnd, Criteria2:="<=5"
Code 2
Selection.AutoFilter
ActiveSheet.Range("$A$1:$K$118").AutoFilter Field:=6, Criteria1:=Range("P1").Value, _Operator:=xlAnd, Criteria2:=Range("Q1").Value
View 2 Replies
View Related
Apr 6, 2012
I have a TextBox on a multipage on a userform. When used, entries are trapped by
Private Sub tbxCrew_Change()
Call OnlyNumbers
The code then successfully shifts to the following
Private Sub OnlyNumbers()
If TypeName(Me.ActiveControl) = "TextBox" Then
At this point, it decides that TypeName(Me.ActiveControl) = "MultiPage", not "TextBox" and skips over to End Sub allowing me to enter both text and numbers in the TextBox.
View 4 Replies
View Related
Mar 30, 2009
If I had a table of data (say in range A5:D15) and then I autofiltered that table in vba with...
range("A5:D15"). autofilter
Is there any way that I can change the positioning of the autofilter drop down arrows, to row 1 say, rather than the usual row 5 (the top of the table)?
View 9 Replies
View Related
May 14, 2012
I want to create a searchbox in Excel which will locate text in a massive amount of data, for example, if a user types into the box....
"123"
I want the search box to filter the spreadsheet using the autofilter from cell B3, thus filtering out all results that are NOT "123".
Currently I have a button to press which brings up the CTRL + F screen, but that isn't exactly what is required in this instance.
View 6 Replies
View Related
Feb 3, 2010
I am trying to use the AutoFilter/Custom function in Excel (it is available under the Data Menu). It offers me two conditions/criteria that I can apply using and/or. For eg:
Filter:
does not begin with - 3
and / or
does not begin with - 9.
I want to add a third 'and' criteria .. is it possible, and if so, how?
The column that I am trying to filter has numbers formatted as text.
View 9 Replies
View Related
Mar 5, 2007
Automating Data Filter Autofilter. i would like to automate the autofilter (from a form)...the following code works, but...it needs improvement...
myfilter = Range("d2").Value
Selection.Range("testmonth").Select
Selection.AutoFilter Field:=1, Criteria1:=myfilter
View 4 Replies
View Related
Oct 25, 2012
I'm trying to filter and delete unwanted rows as I need row where dates is within a specified range.
How can I do this using AutoFilter? or are there any other alternatives?
View 2 Replies
View Related
Apr 27, 2009
using VBA I have a control sheet which summerises variouse counts & totals of data held on a detail sheet. Bu using filters and counting the visable rows.
Statistics on 50 columns of data held in several thousand (rows) mixed around eight business regionsheld in first column.
I could determin the number of affected rows by using Tick boxes on the control sheet and applying filters to the detail records
A) checkbox indicates if I need filtering on the type of data in my detail sheet and apply the filter
Selection.AutoFilter Field:=XX, Criteria1:="Y"
B) Because I could not have more than two criteria on an autofilter column I resorted to using Advanced Filter on the column with the Business UNIT's,
I Create a range write the criteria of the records to be filtered into the range, then apply an advanced filter using that range.
Both of these work well indevidually, but I am getting inconsistant results when I mix them
using the autofilter route I can select multiple tick boxes and the output is correct, and using the advanced filter I can select any combination of business units and the output is correct, however I cant get them to work together
View 4 Replies
View Related
Oct 16, 2008
if anyone knows some VBA code to filter on the next line down in an autofilter list.
My spreadsheet has a column with the names of people, which can appear multiple times in no particular order.
I have a macro that I run several times -- once for each individual in the column. The way that I currently do this is by manually using the autofilter on that column to select a person from the autofilter dropdown list. After I've manually filtered on a person, I click a button which runs the assigned macro. I then manually select the next person in the autofilter list, and click the macro button -- over and over until I've done this for everyone in the autofilter list.
I'd like to add some code at the end of my macro so that the macro ends by automatically filtering on the next person (line) in the autofilter list.
View 9 Replies
View Related
Sep 3, 2007
I have a macro that automatically updates the field value if certain criterias are met. Now the user asked that TYPE be the first column in the spreadsheet. How do I change the last line in my macro to reflect that?
The range has now also changed from "A1:AT1000" to "A1:AG1000" ..
View 4 Replies
View Related
Apr 5, 2013
I got the following code from Use AutoFilter to filter and copy the results to a existing worksheet and would like to incorporate this into my VBA project. The problem however is that this code were written to perform on one workbook and this is where my problem is. My project is between two different workbooks and cannot seem to get this code modified to do what it is supposed to do between these two workbooks. Everything I have tried so far failed. In short what this code would do is to check the existing data on the one sheet (the source) and extract only the data which is meeting my set criteria, and copy this data to the destination sheet. This is what I would like to do between two workbooks. With this the sample code as provided by Ron de Bruin. The sample workbook could be accessed trough the following link [URL]..... With this the code for matching and copying on one workbook.
Code:
Option Explicit
'>>
'This example will copy the filter results below the existing data on the destination sheet.
'Note the sheet "RecordsOfTheNetherlands" must exist in your workbook.
'This example will not copy the header row each time so when you manual add the worksheet
'"RecordsOfTheNetherlands" to your workbook you must add the headers yourself on the first row.
[Code] ............
View 1 Replies
View Related
Jun 23, 2006
I've have and autofilter in the heading of a column that allows me filter on All, NonBlanks, Blanks, Cell Entries, Etc.....But for some reason when I filter on all a number of rows are hidden or the row height is set to 0 and I can't view the cells unless I change the row height.
View 2 Replies
View Related
Jan 7, 2009
I want to have a cell report the sum of a column and have that sum change depending on which values I have filtered on another column. I have a cell reporting a sum of times in column E, but if I filter Column F to show only jobs for 1/16/09, I want that number to display the total time for just those shown. At this point, it just shows the total regardless of what is filtered.
View 3 Replies
View Related
May 28, 2014
I'm looking to do a check on every row after I set an autofilter. Here's a scrubbed version of what I have so far.
Sub test()
max_x = Worksheets("Data").Range("B1048576").End(xlUp).Row
For datarow = 3 To max_x
If Worksheets("Data").Cells(datarow, 4) = "Wire" Then
Worksheets("Data").AutoFilterMode = False
[Code]....
View 3 Replies
View Related
Apr 3, 2008
I am using the autofilter function on a spreadsheet and the first column displays numerical data ranging from 1 to over 100. When I apply the 'Sort Ascending' from the autofilter on this column, it is attempting to display the data in alphabetical/numerical order however the order it is displaying appears such as this 1, 10 , 100, 101, 102, before moving on with data that starts with 2 (2, 20, 21, 22, 23 etc). Is there a way I can filter this column to display literal numerical data such as 1, 2, 3, 4 etc?
View 2 Replies
View Related
Oct 12, 2009
I am currently working on the attached spreadsheet...
As you can see, there are currently two columns (A and B) which refer to Date of order. Column B is generated from column A which I will eventually hide.
However, I want to split up the numbers in a copy of column A, so that I can have a column which shows year of order (i.e 2008 or 2009).
I could of course do this manually, but is there a fast way to do this?
View 6 Replies
View Related
Apr 3, 2014
Is there a way to automatically determine the final row number showing after a manual filter operation? Or maybe getting a list of the row numbers showing on the screen.
The project requires a macro that loops through only the rows of a filtered list, not all of the rows in the worksheet.
View 3 Replies
View Related
Feb 8, 2014
How can I filter a list of numbers in different currency e.g. in $, eur, yen for amounts with one or more currency?
View 9 Replies
View Related
Jun 6, 2009
table.tableizer-table {border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif; font-size: 12px;} .tableizer-table td {padding: 4px; margin: 3px; border: 1px solid #ccc;}
.tableizer-table th {background-color: #104E8B; color: #FFF; font-weight: bold;}
florida golf found 4 time(s) in 21 Title words (Density: 38.10%) florida golf found 7 time(s) in 25 Meta Description words (Density: 56.00%) florida golf found 8 time(s) in 49 Meta Keywords words (Density: 32.65%) florida golf found 2 time(s) in 18 Heading(s) words (Density: 22.22%) florida golf found 18 time(s) in 191 Alt tag(s) words (Density: 18.85%) florida golf found 14 time(s) in 470 Linktext words (Density: 5.96%) florida golf found 5 time(s) in 210 Bold text words (Density: 4.76%)
View 9 Replies
View Related
Apr 3, 2012
I have few numbers in Column "A". Few are normal figures & few are decimal numbers, like this:
20
5
5.63
4.5
200
53.263
125.5
Now I want to filter only the decimal numbers, so that after filter the result will show like this:
5.63
4.5
53.263
125.5
But I don't want to use any other column for doing so. I can do it using MOD in other column but I want the result in the same column.
View 7 Replies
View Related
Sep 25, 2009
Im sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies
View Related
Jul 16, 2009
I am trying to filter my excel sheet based on certain digits in a column of part numbers. The part number has 10 characters. I would like to filter it so that all part numbers where the 4th character is the number 5 or 7 is listed and where the 5th character is a zero. (i.e. R4X5831310 is a part number where 5 is the 4th character; I would like the filter to show this part number)
View 2 Replies
View Related
Jan 22, 2010
I've attached a model with my problem highlighted in COLUMN S of the REPORT tab. The model is an example of what the output should be, but if you run "Full Report" (Command Click 1) you'll see that when the VBA code gets to the penetration operation, it fails to paste the value. The identical code works perfectly in the "Subs Report" (Command Click 2). This is the code in question as part of a for loop:
View 2 Replies
View Related
Aug 20, 2014
I can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
View 4 Replies
View Related
Jun 18, 2009
if i run my macro that saves a sheet as a certain name and then prints it, it works, but if i run my macro and the file already exists it asks me to overwrite it. If i select yes it prints it and carrys on with the rest of the macro, (good). If i select no the macro fails. How can i get it so if i hit no, it runs the rest of the macro after the print command?
View 2 Replies
View Related
Sep 16, 2009
Haven't done a LOT with forms, but this should work (in my mind) and doesn't.
I'm using a ComboBox linked to a named range of "DATES" for a user to select a date. All I want to do is find that date in column A of the Sheet1.
View 7 Replies
View Related
Dec 31, 2009
The code below will enable you to browse for a picture and insert it at cell location O9. It works great in excel '03 but when sub is ran in '07 it places the picture at about cell D5 and not really even lined up perfectly with that cell. Does any one have any idea why this is happening and how to make the sub work correctly in '07?
View 6 Replies
View Related
May 29, 2013
I am having issues with a Select Case failing at the end. Here is the code:
Code:
Public jan As Double
Public feb As Double
Public mar As Double
Public apr As Double
Public may As Double
Public jun As Double
[Code] ........
I have bolded the font on where it fails. If I delete the bolded lines the code runs perfect.
View 3 Replies
View Related
Oct 14, 2013
I've got a Userform with hundreds of lines of code and I'm getting Run Time Error 424, Object Required when I try to show it - the problem is that it doesn't take me to the line that fails - is there a way I can identify the problem?
View 5 Replies
View Related
