If I had a table of data (say in range A5:D15) and then I autofiltered that table in vba with...
range("A5:D15"). autofilter
Is there any way that I can change the positioning of the autofilter drop down arrows, to row 1 say, rather than the usual row 5 (the top of the table)?
I m trying to use an Autofilter to filter my cells with a Number Filter of is greater of equal to 4 and is less than or equal to 5.
But as you can see I would like to customise is using a range of 2 values which i have specified in Cell P1 and Q1.
I manage to figure out how to reference to this cell, but Im not sure how can i put my ">=" and "<=" operators into my code so i can get it to work exactly how i want as shown in Code 1.
Code 1
Selection.AutoFilter
ActiveSheet.Range("$A$1:$K$118").AutoFilter Field:=6, Criteria1:=">=4", _
Operator:=xlAnd, Criteria2:="<=5"
Code 2
Selection.AutoFilter
ActiveSheet.Range("$A$1:$K$118").AutoFilter Field:=6, Criteria1:=Range("P1").Value, _Operator:=xlAnd, Criteria2:=Range("Q1").Value
I want to create a searchbox in Excel which will locate text in a massive amount of data, for example, if a user types into the box....
"123"
I want the search box to filter the spreadsheet using the autofilter from cell B3, thus filtering out all results that are NOT "123".
Currently I have a button to press which brings up the CTRL + F screen, but that isn't exactly what is required in this instance.
I am trying to use the AutoFilter/Custom function in Excel (it is available under the Data Menu). It offers me two conditions/criteria that I can apply using and/or. For eg:
Filter:
does not begin with - 3
and / or
does not begin with - 9.
I want to add a third 'and' criteria .. is it possible, and if so, how?
The column that I am trying to filter has numbers formatted as text.
Automating Data Filter Autofilter. i would like to automate the autofilter (from a form)...the following code works, but...it needs improvement...
myfilter = Range("d2").Value
Selection.Range("testmonth").Select
Selection.AutoFilter Field:=1, Criteria1:=myfilter
I am experinacing some difficulty in using the Autofilter in the attached sheet. The workbook consisits of the following sheets:
Main
Contains a button taht crates data for sheet "Working Data" by filtering and formating data found in Raw Data sheet. The code behind it ain't preetty but it worsk. Raw data
Just as the name implies
Working Data
Filter and formated raw data. After the VB code behind the button on sheet Main runs, I Insert an Autofilter on the coluimns of Working data. on column I ( Length ) I try and filter for rows were the value in column I is >= 35. Nothing shows up. I know this is wrong, just by inspection. I can ask for rows were column I is = 35 and get 1 rows. I can ask for rows were column I is = 45 and get 1 rows.
in fact I have Raw Data that comprises about 2000 rows but had to chop it down to meat board size req'ts:>
I'm trying to filter and delete unwanted rows as I need row where dates is within a specified range.
How can I do this using AutoFilter? or are there any other alternatives?
using VBA I have a control sheet which summerises variouse counts & totals of data held on a detail sheet. Bu using filters and counting the visable rows.
Statistics on 50 columns of data held in several thousand (rows) mixed around eight business regionsheld in first column.
I could determin the number of affected rows by using Tick boxes on the control sheet and applying filters to the detail records
A) checkbox indicates if I need filtering on the type of data in my detail sheet and apply the filter
Selection.AutoFilter Field:=XX, Criteria1:="Y"
B) Because I could not have more than two criteria on an autofilter column I resorted to using Advanced Filter on the column with the Business UNIT's,
I Create a range write the criteria of the records to be filtered into the range, then apply an advanced filter using that range.
Both of these work well indevidually, but I am getting inconsistant results when I mix them
using the autofilter route I can select multiple tick boxes and the output is correct, and using the advanced filter I can select any combination of business units and the output is correct, however I cant get them to work together
if anyone knows some VBA code to filter on the next line down in an autofilter list.
My spreadsheet has a column with the names of people, which can appear multiple times in no particular order.
I have a macro that I run several times -- once for each individual in the column. The way that I currently do this is by manually using the autofilter on that column to select a person from the autofilter dropdown list. After I've manually filtered on a person, I click a button which runs the assigned macro. I then manually select the next person in the autofilter list, and click the macro button -- over and over until I've done this for everyone in the autofilter list.
I'd like to add some code at the end of my macro so that the macro ends by automatically filtering on the next person (line) in the autofilter list.
I have a macro that automatically updates the field value if certain criterias are met. Now the user asked that TYPE be the first column in the spreadsheet. How do I change the last line in my macro to reflect that?
The range has now also changed from "A1:AT1000" to "A1:AG1000" ..
I got the following code from Use AutoFilter to filter and copy the results to a existing worksheet and would like to incorporate this into my VBA project. The problem however is that this code were written to perform on one workbook and this is where my problem is. My project is between two different workbooks and cannot seem to get this code modified to do what it is supposed to do between these two workbooks. Everything I have tried so far failed. In short what this code would do is to check the existing data on the one sheet (the source) and extract only the data which is meeting my set criteria, and copy this data to the destination sheet. This is what I would like to do between two workbooks. With this the sample code as provided by Ron de Bruin. The sample workbook could be accessed trough the following link [URL]..... With this the code for matching and copying on one workbook.
Code:
Option Explicit
'>>
'This example will copy the filter results below the existing data on the destination sheet.
'Note the sheet "RecordsOfTheNetherlands" must exist in your workbook.
'This example will not copy the header row each time so when you manual add the worksheet
'"RecordsOfTheNetherlands" to your workbook you must add the headers yourself on the first row.
[Code] ............
I've have and autofilter in the heading of a column that allows me filter on All, NonBlanks, Blanks, Cell Entries, Etc.....But for some reason when I filter on all a number of rows are hidden or the row height is set to 0 and I can't view the cells unless I change the row height.
View 2 Replies View RelatedI have filter in three columns, column F, Col J, and Col L. I need to filter the range based on my input and copy the filtered range. My input will remain same for all three filters, it should copy the filtered range based on my input and paste in sheets (4) of my workbook.
I am expecting three filtered range in sheets(4) one after another with teh header data.
The range element below needs to be dynamic. A1 and down meaning if i was to do this out of VBA I would hold CTRL+SHIFT+DOWN but i cant do that from macro record as it doesn't work, I'm guessing this Range("A1:A73") is the element I need to change but I don't know what to?
Range("Main[#All]").AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:= _
Sheets("Input").Range("A1:A73"), Unique:=True
Im sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies View RelatedI can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
I can set the autofilter, change it, remove all using Macros. What I need to know how to do is reset a filtered column to ALL while leaving all other filters on.
View 2 Replies View RelatedI need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
View 5 Replies View RelatedHow can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies View RelatedI have a database in Excel 2013 and now I want that when a value (a person's name) is entered in a cell. That then the database sort of filters the list for me, so it's still possible to make changes in the entries.
[URL]
Picture above to specify the search, which I would therefore like to edit
Dashboard_Action Pool Team 7.2.xlsm
I have been all morning working on a simplified version of the tutorial from YouTube: Create your own Excel Search Pt. 4. But came back later so only then that I can not change the data:?
I found a great bit of Advanced Filter code that works great, and fixed a problem of clearing a cell breaking the filter.
But if I want to increase the criteria from 1 row to 2, so you can start to include And , Or operations, it breaks the filter. Even an attempt at a manual one fails, until you put the criteria range back down to one row, then it's fine again.
I've tried changing the Target Row to >2 but that didn't work. how to make the criteria range bigger, and no problems of breakage if you clear the cells? It makes for a very useful automated Advanced Filter.
Here's the code :
[Code] .....
Database = the named area of raw data.
DATA is the name of the raw data worksheet
The criteria range should be AZ1:BC3, but of course royally breaks it...
How to automatically filter can filter and blue-colored cells.
View 4 Replies View RelatedWriting code to do the following:
Save advanced filter settings
Remove filter (or simply set to be 'select all'
Run other code (I have this piece of course)
Put filter back on with same selections chosen as when it was removed
(Need this becuase the code in the middle does not work properly when the data is filtered)
I just got into the world of PowerPivot, Excel 2013 and Pivot Tables and am in the process of creating a Dashboard which I will then be uploading to SharePoint 2013.
On top of page I added the new timeline filter which I've linked to my pivot charts. Now what I would like to do, is create an additional pivot chart which looks at whatever date range has been used in the timeline filter and subtract 5 years from that. So, when I select a date range of November 2013 - December 2013 in timeline filter, the additional pivot chart will show the details for November 2008 - December 2013. This is where I get stuck.
I'm using two SSAS cubes which I'm combining together in PowerPivot and then display in Pivot Tables and Pivot Charts.
Can anyone explain why the unique filter does not produce a unique result - sample attached?
View 2 Replies View RelatedI have some columns on which I have a filter, with some columns next to those that have information in them.
What I need to do is filter only columns A-F when apply filter values, but keep columns I-K fixed as A-F change when they are filtered..
I've a table of data which users auto-filter. I'm wanting to capture the filter criteria each time the filter is applied / re-applied. Can't seem to find an 'event' for the auto-filter.
View 4 Replies View RelatedHow do I go about using an advanced filter to filter a list of data e.g.
boat
boat
boat
car
car
truck
and have the filter extract only the boat entries to another worksheet, so on another worksheet I end up with
boat
boat
boat
1- Force cell format date to by (yyyy/mm/dd) only, with worng msgbox( validation).
2- Make the first day of a month in a color cell
I've Tried this In Conditional Formating (=VALUE(right(A1;2))=1) but didn't work
3-Make Advanced Filter to filter data between two dates .
I am in the process of making a database more efficient and am running into a problem with sorting data. I currently am trying to use AutoFilter to sort the data. When I want to then narrow the results further using the same column as the critical and there is nothing that matches the critical, I get everything from the entire database that matches that critical rather than what I want to see, which, in this case, would be nothing.
I have attached a sample file. In it, when All AF 1000 is run and then Selected MAC 2000 Wash is run, I want to see no results instead of seeing all MAC 2000 Washes from the original data set. I can do it using IF/THEN but I am looking for a faster way to do it.