Automating Data Filter Autofilter. i would like to automate the autofilter (from a form)...the following code works, but...it needs improvement...
myfilter = Range("d2").Value
Selection.Range("testmonth").Select
Selection.AutoFilter Field:=1, Criteria1:=myfilter
I m trying to use an Autofilter to filter my cells with a Number Filter of is greater of equal to 4 and is less than or equal to 5.
But as you can see I would like to customise is using a range of 2 values which i have specified in Cell P1 and Q1.
I manage to figure out how to reference to this cell, but Im not sure how can i put my ">=" and "<=" operators into my code so i can get it to work exactly how i want as shown in Code 1.
Code 1
Selection.AutoFilter
ActiveSheet.Range("$A$1:$K$118").AutoFilter Field:=6, Criteria1:=">=4", _
Operator:=xlAnd, Criteria2:="<=5"
Code 2
Selection.AutoFilter
ActiveSheet.Range("$A$1:$K$118").AutoFilter Field:=6, Criteria1:=Range("P1").Value, _Operator:=xlAnd, Criteria2:=Range("Q1").Value
If I had a table of data (say in range A5:D15) and then I autofiltered that table in vba with...
range("A5:D15"). autofilter
Is there any way that I can change the positioning of the autofilter drop down arrows, to row 1 say, rather than the usual row 5 (the top of the table)?
I want to create a searchbox in Excel which will locate text in a massive amount of data, for example, if a user types into the box....
"123"
I want the search box to filter the spreadsheet using the autofilter from cell B3, thus filtering out all results that are NOT "123".
Currently I have a button to press which brings up the CTRL + F screen, but that isn't exactly what is required in this instance.
I am trying to use the AutoFilter/Custom function in Excel (it is available under the Data Menu). It offers me two conditions/criteria that I can apply using and/or. For eg:
Filter:
does not begin with - 3
and / or
does not begin with - 9.
I want to add a third 'and' criteria .. is it possible, and if so, how?
The column that I am trying to filter has numbers formatted as text.
I am experinacing some difficulty in using the Autofilter in the attached sheet. The workbook consisits of the following sheets:
Main
Contains a button taht crates data for sheet "Working Data" by filtering and formating data found in Raw Data sheet. The code behind it ain't preetty but it worsk. Raw data
Just as the name implies
Working Data
Filter and formated raw data. After the VB code behind the button on sheet Main runs, I Insert an Autofilter on the coluimns of Working data. on column I ( Length ) I try and filter for rows were the value in column I is >= 35. Nothing shows up. I know this is wrong, just by inspection. I can ask for rows were column I is = 35 and get 1 rows. I can ask for rows were column I is = 45 and get 1 rows.
in fact I have Raw Data that comprises about 2000 rows but had to chop it down to meat board size req'ts:>
I'm trying to filter and delete unwanted rows as I need row where dates is within a specified range.
How can I do this using AutoFilter? or are there any other alternatives?
using VBA I have a control sheet which summerises variouse counts & totals of data held on a detail sheet. Bu using filters and counting the visable rows.
Statistics on 50 columns of data held in several thousand (rows) mixed around eight business regionsheld in first column.
I could determin the number of affected rows by using Tick boxes on the control sheet and applying filters to the detail records
A) checkbox indicates if I need filtering on the type of data in my detail sheet and apply the filter
Selection.AutoFilter Field:=XX, Criteria1:="Y"
B) Because I could not have more than two criteria on an autofilter column I resorted to using Advanced Filter on the column with the Business UNIT's,
I Create a range write the criteria of the records to be filtered into the range, then apply an advanced filter using that range.
Both of these work well indevidually, but I am getting inconsistant results when I mix them
using the autofilter route I can select multiple tick boxes and the output is correct, and using the advanced filter I can select any combination of business units and the output is correct, however I cant get them to work together
if anyone knows some VBA code to filter on the next line down in an autofilter list.
My spreadsheet has a column with the names of people, which can appear multiple times in no particular order.
I have a macro that I run several times -- once for each individual in the column. The way that I currently do this is by manually using the autofilter on that column to select a person from the autofilter dropdown list. After I've manually filtered on a person, I click a button which runs the assigned macro. I then manually select the next person in the autofilter list, and click the macro button -- over and over until I've done this for everyone in the autofilter list.
I'd like to add some code at the end of my macro so that the macro ends by automatically filtering on the next person (line) in the autofilter list.
I have a macro that automatically updates the field value if certain criterias are met. Now the user asked that TYPE be the first column in the spreadsheet. How do I change the last line in my macro to reflect that?
The range has now also changed from "A1:AT1000" to "A1:AG1000" ..
I have a large number of sheets with data in the following general format:
x ..... y ............ z etc
A Unique value Unique value
A Unique value Unique value
B Unique value Unique value
B Unique value Unique value
C Unique value Unique value
C Unique value Unique value
D Unique value Unique value
D Unique value Unique value
E Unique value Unique value
E Unique value Unique value
In seperate sheets, I want the following:
x y1 y2
A
B
C
D
E
x z1 z2
A
B
C
D
E
And so on for a number of columns - I always want column "x" with another column, however I want the two values for the same value of x to be next to each other, not above one another.
Just wondering if any one can help me come up with some code to remove some lap time in my document ....
View 14 Replies View RelatedI got the following code from Use AutoFilter to filter and copy the results to a existing worksheet and would like to incorporate this into my VBA project. The problem however is that this code were written to perform on one workbook and this is where my problem is. My project is between two different workbooks and cannot seem to get this code modified to do what it is supposed to do between these two workbooks. Everything I have tried so far failed. In short what this code would do is to check the existing data on the one sheet (the source) and extract only the data which is meeting my set criteria, and copy this data to the destination sheet. This is what I would like to do between two workbooks. With this the sample code as provided by Ron de Bruin. The sample workbook could be accessed trough the following link [URL]..... With this the code for matching and copying on one workbook.
Code:
Option Explicit
'>>
'This example will copy the filter results below the existing data on the destination sheet.
'Note the sheet "RecordsOfTheNetherlands" must exist in your workbook.
'This example will not copy the header row each time so when you manual add the worksheet
'"RecordsOfTheNetherlands" to your workbook you must add the headers yourself on the first row.
[Code] ............
I'm currently trying to automate the process of creating Data Validation.
PFA.
I have Grades and Names List.
" GradesList " Range has values "One, Two, Three, Four "
I'm trying to map Names List to GradesList using INDIRECT().
Debug the function DataValidation() to understand the issue better.
I have a huge database of textual files all of which have the same format - space separated text files. I need to find the average of the last column of all these files.
Each file is named uniquely. Is there an stress-free way to set up an automated procedure to go through each of these files automatically and to record the average of the last column along with the name of the file. I attached a few text files - these are daily prices of a few securities. The last column is Volume. I need to find and record the average of this column for each of these files.
The text files are here:
[url]
I've have and autofilter in the heading of a column that allows me filter on All, NonBlanks, Blanks, Cell Entries, Etc.....But for some reason when I filter on all a number of rows are hidden or the row height is set to 0 and I can't view the cells unless I change the row height.
View 2 Replies View RelatedI have a database in Excel 2013 and now I want that when a value (a person's name) is entered in a cell. That then the database sort of filters the list for me, so it's still possible to make changes in the entries.
[URL]
Picture above to specify the search, which I would therefore like to edit
Dashboard_Action Pool Team 7.2.xlsm
I have been all morning working on a simplified version of the tutorial from YouTube: Create your own Excel Search Pt. 4. But came back later so only then that I can not change the data:?
How do I go about using an advanced filter to filter a list of data e.g.
boat
boat
boat
car
car
truck
and have the filter extract only the boat entries to another worksheet, so on another worksheet I end up with
boat
boat
boat
1- Force cell format date to by (yyyy/mm/dd) only, with worng msgbox( validation).
2- Make the first day of a month in a color cell
I've Tried this In Conditional Formating (=VALUE(right(A1;2))=1) but didn't work
3-Make Advanced Filter to filter data between two dates .
Im sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies View RelatedI found a template at microsoftofficeonline.com it's just a bracket. I feel it has some underlying functionality, as they have a template in visio as well, but I can't figure it out.
So, what I'd like to do is have a workbook with say 100 worksheets. Each worksheet will have a person's bracket. Each person will write in all their picks. Their will be a master bracket where the actual winners will go, as the results are posted. When the master bracket is updated, Excel will flip through each worksheet, checking to see if the win in the master bracket matches the individual bracket. Points will be awarded or not.
Can that be done? I've also done a google search and can't get anymore help. I know that the web has multitudes of free versions, which I'd use, the only problem is that people would hesitate to register. doing it in excel, on the office system, there's no need to register, your cpu login takes care of authentication.
I'm trying to make alot of graphs(400) and I'm not really sure where to start but here with what I've got so far.
Sub macro2()
Dim x As Long, t As Long, y As Long, z As Long
y = 3
z = 5
x = 4
While x < 1000
With Worksheets("cabernet (2)")
t = Cells(x, 1).Value
Charts.Add
ActiveChart.ChartType = xlLineMarkers
ActiveChart.SetSourceData Source:=Sheets("cabernet (2)").Range("By:Hz"), PlotBy:=xlRows
ActiveChart.Location where:=xlLocationAsObject, Name:="Cabernet (2)"
ActiveWindow.Visible = False
ActiveChart.HasTitle = True
ActiveChart.charttitle.Text = " " & t
Windows("complete Favorite Genes.xls").Activate
y = y + 3
z = z + 3
x = x + 4
End With
Wend
End Sub
I don't really know if putting a variable directly into a range works, so far it doesn't.
As you can tell I need a line graph of the range B3:H5, then the next is the those same columns but 3 rows down, so the next graph is at B6:H8. I'd also like to through in a title here, but I may just be playing with fire. The title is located in column A starting at 4 and corrosponds with each graph, so it too goes is increments of 3, i.e., the first title is at 4 the second at 7 the third at 10. Somebody help me out this isn't working very well at all.
Private Sub Database_Click()
Application. ScreenUpdating = False
masterfile = "S:OfficeMaster File.xls"
Answer = MsgBox("Do You want to export to Final Database?", Buttons:=vbYesNoCancel)
If Answer = vbYes Then
ThisWorkbook.Worksheets(2). Range("q9").Copy
masterfile.Worksheets(1).Range("a4").Paste
ThisWorkbook.Worksheets(2).Range("q9").Copy
masterfile.Worksheets(1).Range("d4").Paste
ThisWorkbook.Worksheets(2).Range("b3").Copy
masterfile.Worksheets(1).Range("b4").Paste
ThisWorkbook.Worksheets(2).Range("b9").Copy
masterfile.Worksheets(1).Range("c4").Paste
ThisWorkbook.Worksheets(2).Range("e9").Copy
masterfile.Worksheets(1).Range("e4").Paste
ThisWorkbook.Worksheets(2).Range("g9").Copy
masterfile.Worksheets(1).Range("f4").Paste
ThisWorkbook.Worksheets(2).Range("i9").Copy
masterfile.Worksheets(1).Range("g4").Paste
End If
End Sub
for some reason, it doesnt work as it said the masterfile.worksheets is not recognized, but as i go to the immediate thingee, i type in ?masterfile, it give me the exact address, i had been working on this thign for hours, and have no idea what i did wrong.
I have a very peculiar problem. Each month I have a set of financial products for which I calculate the IRR values using XIRR, as the cash flows are uneven. Imagine this, Product names in ColumnA, the cashflow dates in B, and the cash flows with transaction types in ColumnC and finall D has amounts in negetive and positive. Each month I add new cashflows for each product as rows.
Manually I scroll down to select the range for XIRR (both date and amount)
Offlate this work has gone really high in terms of values, and manually cacluating XIRR takes hell lot of time for all the products (currently 80 odd)
I have with Excel autofilter.
I applied an autofilter to a list of data that does not exceed the 1000
items limit, and attempted to filter the data to get a particular item. The
filter did bring up all the items needed, but it also had at the bottom of
the filtered list, another item that was not part of the items to be
filtered, which unfortunately affected my subtotal calculation.
I have 3 columns of data and am using an autofilter to sort it. At the bottom I have a formula =subtotal(9,cells requested) which magically shows me the sum of the data showing only (excludes all the figures which are hidden - it's fabulous). However I was wondering if it is possible to have the same formula but to count the number of things shown instead of sum and another to average.
View 3 Replies View Relatedwhen i used autofilter example there is 3 criteria on it A, B, C and when i choose A one of the lowest column still showing B or C criteria.
View 2 Replies View RelatedThe attached workbook is a follow up report that gets run every Friday. There are 1092 cells that contain formulas that reference a file that was created on Wednesday of the same week. eg.
View 5 Replies View RelatedI am trying to do is have the code display an input box asking the user to type in the file name, or generate this automatically? to an existing folder in a drive
My master file, imports data from another source (excel file) pastes it in the necessary columns at the moment, however the file is run every Monday so the file name is generic, last week was 10723, this week will become 10724 when the data is run next week,
Can I do what I want to? Via either an inputbox for the file name, or by using something so the file name becomes “107 “ & Weeknum(today()-3)
I have 1 spreadsheet in which I need to calculate the % weight of some numbers. Columns A to G have data I do not need for the calculation.
Column H has the numbers of whose % weight I need to calculate. The problem is that the no. of rows containing the numbers can change from week to week and I am trying to automate the calculation of the % weights.
So I want try to use column G (as a reference) (like go at the bottom of it so I can know how many rows of numbers there are) and then calculate the % weights.