I'm using excel 2007 and I'm trying to import data from a .txt file into excel and analyze the data. One of the columns in the .txt file contains descriptions for each row and its in multiple rows. Is there a way to import the .txt file so that it will show a description for each row in one cell?
I imported the data into excel but the issue is the description.
Is there a way to Open or Import a PDF file in Excel 07 ?
View 2 Replies View RelatedI want to import data from 1 excel sheet to another sheet in excel 2007 by clicking the button which i was created through.
Developer>insert>forum control>button
I am importing data into an Excel 2007 worksheet from an online form. They are answers to 30 questions for up to 250 respondents. I was expecting to import one row of data for each respondent however the data is importing in a step like manner as below
Q1Q2Q3
AF169856 Y
AF169856N
AF169856N
AF145723 N
AF145723Y
AF145723N
Any formula/solution to bring all of these responses into one line for each respondent ?
I want to be able to run a macro that will export some of the data from a worksheet called Generated Report into another worksheet called Matrix. The data will be taken Generated REport and grouped into sections of the worksheet. These sections will be defined by the BRID value.
The Data that i want to export will be from the first 5 columns within the Generated Report(note there are other columns which data is not required from).
The following columns will be exported from Generated Report -
BRID,Requirement, Bug Description, Bug ID and Alt Bug ID.
BRIDRequirement Bug DescriptionBUG ID Alt Bug ID
PQ115 PQ115-Login Bug Description text xihllloloj43712 123
PQ116PQ116-Landing Bug Description text ghghghgoot 43713 126
For Matrix
The data will be imported into Matrix worksheet into the following columns as part of the row headings
- Requirement, Description, Bug ID and VF Bug ID.There will also be other columns (outlined below) which i will use to manually enter data
The data will be grouped and imported into the relevant section by its BRID eg PQ115, PQ116 etc.
I want each section (marked by BRID number)to be separated by row headings.
These row headings are to be generated after populating all data within each BRID number.
When the data has been populated in each row there is a column called 'Status' which contains drop down list boxes which can be assigned.
The default status will be set to 'To Do'. The complete row headings are displayed with Output from Generated Report underneath
BRID Priority Requirment Description BugID Alt Bug ID PC UpdateNotes Actual Result Type of DEfect Test Status Tested by
PQ115 PQ115-Login Bug Description text xihllloloj43712 123 To Do
BRID Priority Requirment Description BugID Alt Bug ID QC UpdateNotes Actual Result Type of DEfect Test Status Tested by
PQ116 PQ116-Landing Bug Description text ghghghgoot43713 126 To Do
So far the macro that i have been using allows me to locate the data for each specific BRID in Generated Report and copy into the corresponding BRID section within the Matrix. I have to repeat this step for each new BRID and i want to be able to whole automate this process.
I have an excel sheet with data from Column 'A' to 'S'.
I want to identify duplicate entries in Column 'J' and from those identified columns I want to further search Column 'K', highlight the matching text and then fill text in Column 'L' should have the missing data after matching the 'A' and 'K' cells.excel_duplicate_entries.png
I am using Excel 2013, and I am following the example here: VBScript Scripting Techniques: Read Excel files without using Excel that reads in Excel data as an ADO record set to a classic ASP file using VBScript. I am not able to import all the Excel data successfully, and I need to know what I'm doing wrong. Note that in all these samples cell A1 is the heading text "Column1" and the main data starts on cell A2 (consistent with the example code).
When my source Excel data looks like the following:
Code:
Column1
1
2
3
4
5
6
7
X
9
10
It imports everything OK. However, if I move the X to the next row:
Code:
Column1
1
2
3
4
5
6
7
8
X
10
...the "X" cell gets imported as an empty string. So the imported array looks like this:
Code:
arrSheet[0][0]: Column1
arrSheet[1][0]: 1
arrSheet[2][0]: 2
arrSheet[3][0]: 3
[Code] ....
But if I add another X to an earlier row in the source worksheet, like so:
Code:
Column1
1
2
3
4
5
X
7
8
X
10
...this gets imported OK.
importing some selective data from txt file to excel. Only the following rows I need to pull out from text file into the Excel i.e. Project row, installation row, and two rows immediately below the installation row. This is my logical procedure..
1. Macro look for the rows that contains the word "PROJECT"
2. Open an excel file
3. Pull the row from txt file to this new excel file.
4. Macro look for the rows that contains the word "INSTALLATION"
3. Pull that row with INSTALLATION AS WELL AS Two rows immediately below the INSTALLATION row.
When I export data from .csv or .tsv file to .excel file then all the preceding zero's disappear and the code 0010 display's like 10.
I know I can manually import data from csv to text(option "fromtext" in excel) but i want to do it automatically.
I have a workbook which, amongst several worksheets, also includes 12 blank worksheets (one for each month of the year).
Is it possible to have a macro that will (a) first prompt the user to select an excel file to import (the excel files to import are provided each month and only have one tab); then (b) select which worksheet to import the data (values only) from the selected file into.
I am using Excel 2010 and I want to import data from a text file, but the problem is that the data is more than 1048576 rows of excel. Is there any solution though codes if one sheet fills up and import remaining data to other sheets ?
View 2 Replies View RelatedI need to import thousand of txt files into 1 worksheet keeping the file names as data. Each txt file has 2 columns :
1 0.65914
2 0.65945
3 0.86062
... ...
and each txt file represents recordings made at specific time and date (e.g 0158.DSG_RAWD_HMS_21_ 0_ 0__DMY_29_ 2_12_pulses). I would like to have 2 columns: 1) with the time taken from the name of the txt file (e.g. 21:00:00) and 2) the associated recording. Something like this:
21:00:00 0.65914
21:00:00 0.65945
21:00:00 0.86062
and so on for each txt file and all the recordings piling up in 1 spreadsheet. I have tried to run few codes in VBA, but I have no knowledge of it and none of the code worked. I am using Excel 2010.
I need to perform data mining from a CSV file,and use correlation function to analyse and generate a pattern from the provide data (CSV) for a particular set of error for a given time sample.
Find the CSV file which contains the data which needs to be analysed and generate a pattern.
eventLog_20121205_140322_00000000002119445219.csv
Extracting data from an excel file, the data needed in lies in one column.
in this line
<GPSPosition pntRef="GPS_Auto_0080" wgsLatitude="33.334329659885" wgsLongitude="44.405736558207" wgsHeight="27.615921">
i need to get a table with three columns shows
wgsLatitude, wgs Longitude , wgsHeight
33.334329659885 ,44.405736558207 , 27.615921
etc
and get rid of all other information
this is an example of the how the file look like
---------Column N -------------------
</Feature>
</GPSPosition>
</GPSSetup>
<GPSSetup id="GPSSetupID_18" GPSReceiverDetailsID="GPS_1" antennaHeight="1.660000" stationName="GPS_Auto_0080">
<GPSPosition pntRef="GPS_Auto_0080" wgsLatitude="33.334329659885" wgsLongitude="44.405736558207" wgsHeight="27.615921">
[code].....
seems from above that there are too many data not needed the only thing need to be exracting is one lies of GPSPosition Line.
I have a workbook with many spreadsheet named Sheet1, Sheet2 and so on. Each sheet is filled completely upto 65536 rows. This data is being picked up from a CSV file. In this file there are sites with each site there is a assciated set of data. What happens is the data that extracts data does not differntiate between sites and when it reaches to the end of worksheet it splits the data into next sheet. So I am trying to create a macro to check each spreadsheet starting with the last sheet in the work book for example last sheet in the workbook is seven it should go to sheet6 and if there is a blank row after row 64000 it should cut all the rows and move them to sheet7. Then it should goto sheet5 and do the same and keep on doing it until it reaches sheet1.
View 9 Replies View RelatedI am trying to develop a code which extracts the data from text files inside a folder (Folder test in my desktop) into one sheet. The Macro is in the workbook “Text Extract” which is an excel 2007 file. The data of each text should be copied to Sheet1 of this workbook one below the other. For testing purpose I have kept only one text file in the folder and was trying to copy the data from the text data extracted sheet to Cell A1 of Sheet1 of workbook “Text Extract”. The code works fine till copying the data, but shows below error in the line “Selection.Paste”:
Run time error 438: Object doesn’t support this property or method.
Below is the code:
Sub LoopThroughFiles()
Dim strFile As String
Dim strPath As String
[Code]....
I am attempting to create a template that will utilize data from an Access table, and allow the user to select the parameters in the Excel file. The amount of records in this table is slowing down the Excel file, and I would like to lessen the amount of data that is imported based on the user selection.
The Access table will have three columns:
Part Number|Line|Catalog Code
I would like to import all three columns, but allow the user to select the records imported based on the catalog code.
The users do not have read or write access to the sql tables, so I run an Access query at the end of each day to create an Access table that they can access.
I have 2007 versions.
I have a CSV file which I want to import in excel. There are many text entries after the comma that starts with = and +.
When I imported this csv to excel then excel uses its mathematical logic that and gives a result #Name?
I tried reformatting these cells to treat as Text field only but that did not work.
I would like to maintain these text fields that starts with = and + .
I want to write code so that at the push of a button you can browse and find an ascii file. Select it. and then it will go into the sheet of a excel file that you chose in the code.
View 2 Replies View RelatedI have a macro-enabled template file in Excel 2007. I would like the user to be unable to save in any format other than macro-enabled. They should be free to choose a path and filename, but not the file type.
I presume this means some VBA code in the before save event, but I don't know what.
I have this Macro for Excel which imports 1 file C:datafilesuser1-data-1.txt into cell E52:
View 6 Replies View RelatedI have a large text file that is generated daily and want to import into MS Access as the end result.
First I need to reformat into the row format in excel rather than the format it is in. The issue is not all the segments are the same number of lines or they may have mutli message lines. The names with colon : after them I want to be field names in the table which I wish the text file to import into. Please, I am looking for assistance with this.
I have attached sample data of the text dump, and the name of the file is as you see but different date on the end. At the very end of the text file you will see the desired output which I will then import into Access
Also every new message begins with the dotted line and the date and time at the end.
I have a folder with multiple text files. I want to import one of these files to a sheet called data in an existing Excel file. The excel file has references to this data sheet on other sheets which I want to keep. I want to save this excel file with the name the text file has and repeat this for all the text files in the folder.
I found a macro a while back which does the job nicely of importing and saving the Excel file, however all the data in the other sheets gets lost once it is saved. How to keep the data?
Code:
Sub tgr()
Const txtFldrPath As String = "FOLDER WITH TEXT FILES" 'Change to folder path containing text files
Const xlsFldrPath As String = "FOLDER FOR EXCEL FILES" 'Change to folder path excel files will be saved to
Dim CurrentFile As String: CurrentFile = Dir(txtFldrPath & "" & "*.txt")
Dim strLine() As String
Dim LineIndex As Long
[Code].....
I have a huge list of survey responses which asks people to identify their location and then rate how important 6 facilities in their area is (rating 1 - 4, 4 being most important). So the table has cells are similar to this, except that there are about 5000 responses with about 2500 different locations identified
Location
Location
Location
[Code].....
I have been able to analyse the average results for the whole dataset by using the following formulas:
=COUNTIF(A2:C4,"camden") Count number of occurrences a location is listed
=ROUND(AVERAGE(D2:D4),2) Average response for medical centres
=COUNTIF(D2:D4,1) Counts number of times '1' comes up, would repeat '2', '3', and '4' to create a pie graph
But what I would really like to do it be able to count each response for each question by location (for example "Camden"). I've tried both of these but they don't seem to be working.
=IF(A2:C4,"camden"),COUNTIF(D2:D4),1
=COUNTIF(D2:D4),1,IF(A2:C4,"camden")
I have several files from different departments that I have to extract sections of data from and compile into one central file for reporting.
I am very new to VBA but would like to set up a button so that I can import data from closed files in different departmental directories. I have recorded a macro and got it to work if the file is open but I can't seem to get it to work if the file is closed.
My task is to make an excelfile that import data from other excelfiles. These data should then be summarized. There's not always same files. I should be able to add more files.
View 4 Replies View RelatedI am working on a file that is going to import and then manipulate data from another excel file automatically. I would like this to be as smooth as possible and I am running into a problem. The file I am importing the data from is password protected, so I am opening it in read-only. Also, the file contains links to other excel files.
What I would like to do is indicate in the code to open the file in read-only format so that the user doesn't get a message box asking for the password. Also, is there a way to suppress the message box about updating the links? I have tried application.displayalerts = false but that didn't solve my problem.
I need to summarize some data from multiple files but I can't seem to have the user select the file and import it.
It's a ERA(electronic remittance advice) 835 file that will import with the "Import Text File" routine. I've added the "GetOpenFileName" to it but apparently have not appropriately adjusted my "QueryTable.Add" routine.
I removed the .Refresh Backgroundquery:=False line as this was causing an error and this not SQL data.
The desired files have names like this: C123456.835.EDIPROCESSERPROCEEDED
My simpleton code reads:
Sub IMPORT_835()
' IMPORT_835 Macro
Dim InputFile As Variant
InputFile = Application.GetOpenFilename(Title:="Choose your file", _
FileFilter:="All Files (*.*), *.*")
[Code] ........
No data is imported, Why?
I'm looking for a macro that will import the last row of data of each .csv files from a specific folder, i.e., c: emp, into one new worksheet.
View 1 Replies View Related.Find and Replace data
I have a file that I keep importing into Excel that shows up in Column A. The Range typically varies to how short or how long the end of the file is. But every time I import a file in, the last 20 rows are the same. The 20 rows I want to replace with other values on another sheet.
This is a simple example:
SHEET_1
COLUMN A
1
2
[Code]....
I would want to replace the numbers with the letters. The biggest thing is if I can filter or have excel find the end of the file (using a shift+crtl+End) or something and have a formula on sheet2 that it can reference; then replace. Any way to have excel automatically find the end of the file and replace values without manually doing it.
