I have a very long excell sheet and I want to be able to have two buttons off to the side that allows me to filter and unfilter my page. What I want to accomplish is if the cell in column "A" is not populated then I do not want to see that entire row when I filter.
View 4 RepliesIs it possible to use an advance filter to detect blank cells? Or can the criteria be set to detect all cells that don't contain a letter e.g. "Y"?
View 3 Replies View RelatedI have an excel file with a table in it. It contains 2051 records (attached). This is just a sample, the original file has around 30,000 rows.
When I start using filters, I run into problems:
Step 1: Filter by Unit, condition (e.g.) Unit_23
Excel shows in the status bar the following message: 437 of 2050 records found.
Step 2: If I scroll to the bottom of the table, the row numbers are colored in blue (normal for a filtered list) however the last row is not colored and it actually should not be shown since its unit is not what I filtered for (its unit is Unit_25)
Step 3: Clear the filter of Unit
Step 4: Sometimes (depending on what I filter for), one or more of the bottom rows are hidden!!!
Attachment 301726
I'm wanting to filter a set of data by inputting in to a cell. And it works perfectly...
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If (Intersect(Target, Range("B4")) Is Nothing) _
Then
Exit Sub
End If
Cells.AutoFilter Field:=2, Criteria1:="=" & Range("B4")
End Sub
The only thing is I now need is for the code to clear the filter if the cell (B4) is blank. It currently filters out all the data if the cell is blank.
i have a table with game results like: ...
View 9 Replies View RelatedI have a module that imports data from a text file (120000 rows), filters and removes some unneeded (85000)rows and then puts the data in a designated workbook.
Problem: when filtering by some criteria it for some reason removes a row off the final file for each criteria. I have a total of 23 filtering criteria. I have attached a file for exemplification. You can run the module and import the file, it will be without first 23 rows, even if non of the deleted rows contained the filter criteria.
example.txt
How can I use a pivot table or advanced filter or macros to view rows by
Only today’s date (1 row) ?Only this week ?Only last week ?Only last month ?Only last 12 months ?All dates ? That is, rows are headed by day. I select the rows that I view.
I have a macro that filters a column with varying criteria.
Row 1 has all my column headings.
What I would like to do is copy the 5 rows in view below Row 1 after the filter is applied.
I've got a row of data with a column showing some sales including amounts with 0. Any row with 0 I want gone, so I want the macro to filter the list, delete all the rows with 0 in that column, and then display what's left, all the rows with some number other than 0 in that column.
The code below should filter the 0 rows, delete those rows, and then display what's left. I don't want the heading row deleted, but everything below it that is filtered. What my code below is doing now is not deleting everything it should. How can I fix it.
Sub prepmetrics()
'
' prepmetrics Macro
' for use with monthly report - don't forget the new coversheet
'
Application.ScreenUpdating = False
Range("A7").Select
Selection.AutoFilter
Selection.AutoFilter Field:=14, Criteria1:="0"
' this is the challenge here. How do I tell Excel to select, relatively, whatever
' rows are now showing as a result of the filter?
Range(Selection, Selection.End(xlDown)).Select
Selection.Delete Shift:=xlUp
ActiveSheet.ShowAllData
' there may be a number of different criteria in different columns, so
' we rinse and repeat as many times as necessary but, again, each filter/delete
' task should delete all rows filtered
Selection.AutoFilter Field:=16, Criteria1:=">7500"
Selection.Delete Shift:=xlUp
ActiveSheet.ShowAllData
Application.ScreenUpdating = True
End Sub
I have been trying to transpose a piece of code that was put on this forum back in 2005 into my own Workbook but have been unsuccessful. The original piece of code filtered a column for unique entries and then filtered the main sheet for each unique entry and cut and paste each row that the unique value occurred in and in a new worksheet. A new worksheet would be created for each unique filter.
So what I am trying to do is look up a list of values that i have in a list on the worksheet. Then for each entry in my list, create a new page and cut and pasted the filtered main worksheet into that page.
Finally return to the main worksheet and then remove all filters.
I have attached the original file that was submitted so you can look at how it works and I have posted a sample my worksheet (with some things disabled to reduce file size but hopefully you will get the layout. However I don't currently have that sample on this computer. It is posted on another thread under the title "Selecting rows with specific values in a column".
I have filtered a worksheet and want to only total the data in the columns that are visable, is this possible?
View 4 Replies View RelatedI have a 'dump' of a general ledger accounting system....about 20,000 rows. Column A contains the journal number for each set of transactions (there are usually two rows in each set but sometimes three), column C contains the name of the account, and column E the amount. For example:
Row 269 cell A269 = 487 (journal number) cell C269 = Cheque, cell E269 = $50
Row 270 cell A270 = 487 (journal number) cell C270 = Travel, cell E270 = -$50
What I am wanting to do is to extract the sets of journal entries, where the account name (in column C) is "Cheque"....so I would want to extract rows 269 and 270 based on the above example. If I filter using the account name it only gives me one row for each journal transaction - only half of the story. Given that the journal number links the two rows.
I have a VBA code that captures auto-filtering based on two criteria, but the problem is, the spreadsheet I am working on changes the amount of rows daily (ie: more rows are added onto it).
How can I change my code such that it doesn't fix the filtering area to a certain date's row #'s?
The code is
Rows("6:6").Select
Selection.AutoFilter
ActiveSheet.Range("$A$6:$Q$108").AutoFilter Field:=11, Criteria1:=
"2017708007"
ActiveSheet.Range("$A$6:$Q$108").AutoFilter Field:=5, Criteria1:= _
xlFilterYesterday, Operator:=xlFilterDynamic
I can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I have a spreadsheet of raw data that has been downloaded in Excel. In Column N there are different site numbers.
I want to use a new Sheet for each site. Using a formulae I want to filter the data for each site and then copy the entire row to the relevant site`s page.
So I should end up with a sheet for each page and allthe data sorted correctly?
I import a text file that displays outstanding parts orders. The order Number column only displays one number even if there are multiple parts ordered I.E. so if three parts are on order then the order number is displayed once with the other two underneath blank. I would like to filter the column that displays the amount of stock that is available so that even if the row has no stock but the other two have all three rows are displayed that reference the order number.
Example Screen
Example.jpg
I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
Supplier
Invoice Date
GL Date
Invoice Amt
[Code].....
I am working in the attached spreadsheet. For anyone who does not wish to open the link, let's say these sheets are titled 'Sheet1' and 'Sheet2'.
Sheet2 looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
[Code]....
Now, how may I pull this data into a summary sheet (Sheet1) that skips over any instances where column A ("Year") is blank so it looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
2013 2 Pat
2013 5 Bob
[Code]...
Note: All columns are the EXACT same across each sheet(including Sheet1, Sheet2, Sheet3), if that extra piece of information works.
PS It is fine if, in order for a formula to work, I need to copy and paste the formula for the length of rows per each Sheet to consolidate.
EDIT:
So, in my industry, any summary-level data (shown on Sheet1) must have a linked reference to a particular sheet (Sheet2, Sheet3, etc.) so the user knows where the raw data came from. This is to ensure increased accuracy of data and minimize human error (like, if for example, I accidentally didn't copy and paste all the rows correctly).
I have uploaded the actual sheet to show what the data actually look like. I am trying to pull in 2013 data into my "Summary Page" and would like to have all the data linked to the '2013' sheet but skip any blank rows.
Here is my failed formula:
=INDEX('2013'!F$3:F$338,SMALL(IF('2013'!$E$3:$E$338<>"",ROW('2013'!$E$2:$E$338)-ROW('2013'!$E$2:$E$338)+1,ROWS(B$1:B1)),""))
I have been using this macro to separate lots of rows with a certain amount of blank rows.
Example:
Code:
Sub test()
Dim j As Long, r As Range
j = InputBox("type the number of rows to be insered")
Set r = Range("A2")
[Code] .......
I trying to change it so that, instead of inserting how ever many blank rows, it just copys the row above.
Example (Row A to C)
I have been messing around with macro recorder and i could select each row and paste it into the blank rows, but from researching on the internet selecting and pasting data seems to be a waste of resources (ram?) and i will be running this on a couple hundred rows (lots of data). Also, i would like to keep the functionality so that i can still choose how many times it copys/inserts each individual row from a input box.
I eventually want the data to end up like it is shown in the table but i am takin it one step at time because i want to understand what the code is doing.
i have this code which inserts blank rows in alternate rows,
Code:
Sub insertrow()
' insertrow Macro
Application.ScreenUpdating = True
Dim count As Integer
Dim X As Integer
For count = 1 To 20
If activecell.Value "" Then
activecell.Offset(1, 0).Select
[code].....
what changes should i make in this code to insert rows only when ther are now blank rows. So first time i run, blank rows are already there, and when i update some data at the bottom and re-run it inserts blank rows again.
I have this in Column A, with about 120 entries:
Company 1
Contact 1
Address 1
City, ST, ZIP 1
Phone 1
Fax 1
Company 2
Contact 2
Address 2
City, ST, ZIP 2
Phone 2
Fax 2
Company 3
Contact 3
Address 3
City, ST, ZIP 3
Phone 3
Fax 3
I want this:
Company 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1
Company 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2
Company 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3
all the way down.
I can't figure out how to record the macro to tell it to then skip the blank line, collect the next set of data, and put it in the next row. I can do it for two, but then it just replaces the first two with the next two and I lose data.
Using excel's text to speech I've put together a basic spreadsheet.
[URL]
Code:
Function talkit(Speech)
Application.Speech.speak (Speech)
talkit = Speech
[Code]....
I have the following codes to delete all blank rows in column A
Dim lastrow As Long
lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row
MsgBox lastrow
With Sheet1
For t = 1 To lastrow
If Cells(t, 1) = "" Then
Rows(t).Delete
End If
Next t
End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
I have a worksheet used for inventory. In Column A is the quantity (to be entered manually). In Column B is the product description. In Column C is the price of the product, and Column D the total price (column C price x the quantity entered in Column A). At the bottom of the worksheet is a grand total. Also, Column B (products) is grouped into subheadings by the supplier each product came from (for example, row 6 has the title PPG, and then rows 7-137 list every product from PPG).
The calculations in this worksheet work fine. What I am trying to do is, using a macro once all of the appropriate quantities are entered in column A, automatically hide every row of product that does not have a quantity. The tricky part is, if no products under a given supplier subheader are entered, the subheader also hides, and if a quantity is entered, that subheader shows. For example, if I have no quantities under any products for PPG, then the PPG subheader hides, but if just one quantity is added, PPG shows. Also, this list will be constantly updated, new products will be put in and taken out all of the time, so I cannot base the macro on a specific number of rows.
I have an imported report in a spreadsheet. It imports to three columns. I need to check each row in column A for three seperate criteria and delete the rows I don't need. I need to delete blank rows and check next row for page header info. Delete these and next rows to next blank cell. Check next row for page header and not delete if not page header. Several rows down will be a cell with 23 blank spaces before the word Reg: and sometimes other words past this but always this first. This row is to be kept. I looked at the FAQ's example of Deleting but I don't think it will work. I also need to put a key word in column A at a point where I want to stop. This report is a couple thousand rows long so a VBA procedure would really save time. I have a procedure I use to check for two zero's in two cells that hide these rows but I couldn't modify it to work on this report.
View 9 Replies View RelatedI have the code below that clears colums B-J and L-N in whatever row you activate a cell in. When a row gets cleared, how do I shift all the other rows up to eliminate blank rows in between the data real-time? I've deactivated the cut function already since this messes up references in the worksheet, so it would have to only use copy, paste, and clearcontents functions. Also, I don't want to DELETE any rows, just essentially shift the blank rows to the bottom. So when a row is cleared, all others shift up and the blank one goes to the end of the data that is available for data entry, so rows 17 to 116 are always available. But it must check to make sure that B-J and L-N are ALL blank, otherwise some wanted rows with one piece of information might get cleared. So at any given time, my range will always go from row 17 to 116. This is Excel 2007. Here is the code I have to clear rows that can be built upon.
View 14 Replies View RelatedI have an excel sheet that has the A column populated with many different things.
I'm not sure how possible it is, but I'm trying to group everything up by 7s and putting a space in between the groups.
So...
ABCDEFG1
ABCDEFG2
ABCDEFG3
ABCDEFG4
ABCDEFG5
ABCDEFG6
ABCDEFG7
HIJKLMNOP1
HIJKLMNOP2
HIJKLMNOP3
HIJKLMNOP4
HIJKLMNOP5
HIJKLMNOP6
HIJKLMNOP7
QRSTUV1
QRSTUV2
QRSTUV3
QRSTUV4
QRSTUV5
QRSTUV6
QRSTUV7
Would turn into
ABCDEFG1
ABCDEFG2
ABCDEFG3
ABCDEFG4
ABCDEFG5
ABCDEFG6
ABCDEFG7
HIJKLMNOP1
HIJKLMNOP2
HIJKLMNOP3
HIJKLMNOP4
HIJKLMNOP5
HIJKLMNOP6
HIJKLMNOP7
QRSTUV1
QRSTUV2
QRSTUV3
QRSTUV4
QRSTUV5
QRSTUV6
QRSTUV7
I have 1006 records in an excel file and would like to erase 2 blank rows every 37 filled rows.
View 9 Replies View RelatedI have 2 columns of data E and F. Column E has 11 different words that randomly repeat, Column F has 10 years of dates, about 1,000 entries (10/11/12 format). Both columns values come from formulas.
I am trying to copy cells E & F to columns K & L starting in row 2 only if there is is data in column E (one of the 11 words) and skipping all others rows. Both the E & F values of tthe row must be copied together, i.e if text is in E45, then copy E45 and F45 into column K and L starting with K2 & L2. This is a task which will be repeated multiple times as data is replaced in columns A-D.
I have been trying to delete about 86k rows in my table in a worksheet. It has been over 5 hours now and it is still running to delete. any better solution? or how long do i need to wait for the system to finish its work?
View 1 Replies View Related