Getting A Range Of Values From First To Last, Several Times
Mar 27, 2007
I have a new project which I need some of the wonderful expert help with here at the MrExcel.com forum.
I have two columns of data, ITEM#, and LINE#, where ITEM# repeats multiple times in the report, and LINE# shows individually each line where the ITEM# appears in the source:
ITEM# LINE#
------- --------
12120 0001
12120 0002
12120 0003
12120 0009
12120 0020
12120 0021
55555 0004
55555 0005
99999 0006.........
View 11 Replies
ADVERTISEMENT
Feb 23, 2010
In my workbook I have about 20 sheets (less in the attached sample), and on most sheets I’d like to query data for each day and find an average value based on the time and then copy that result into another sheet. I’m not sure if I’ll need 2 macro’s for this or if one can be used.
Here’s a quick description:
Assuming that I am currently in the sheet I want to run the macro, then I will either input “1:45” or “0:45” into a popup box, or I could always simply input the 1:45 or 0:45 in the code itself. I’m flexible
1:45:
If I input 1:45, then I’d like the macro to find the first 1:45 in Column B and the value in the same row in Column F will be used in the calculation. Once 1:45 is located, then the macro moves up to find 22:45 in Column B and the value in the same row in Column F will be used in the calculation.....
View 11 Replies
View Related
May 30, 2009
The following times I have in two cells next to each other. 16:55:0917:23:00. I'm trying to calculate the difference between the two times but the problem is the paste special values, values are way different and this is causing the calculations to be off.
View 3 Replies
View Related
Mar 14, 2014
I have a excel sheet with several columns and 2700 numbers in each column. In the first column there is standing from witch quarter to witch quarter of the day the values are (and this for several days in one sheet). I want to take the average of all the first quarters of the day, the average of all the second quarters of a day,.... But if I would do that by just sorting my table on the quarters and than manually make the formullas I would need to give in 800 formules. (way to much)
So I would like to find an easier way to take the average of column B for the valeus were A is "00:00 -> 00:15" (this are avery time 28 numbers in the month february)
In attachement you can find an example of my problem, although it isn't with real values.
View 5 Replies
View Related
Jan 16, 2010
=COUNT(
1/FREQUENCY(
MATCH($A$1:$A$50,$A$1:$A$50,0)
),
ROW($A$1:$A$50)-ROW(OFFSET($A$1:$A$50,0,0,1,1))
+1))
I'm looking to tweak this formula to count the number of unique values that occur at least 3 times.
So, imagine that A1:A50 contain 50 last names from the phone book, 27 of which are unique according to the formula above.
Now, further imagine that only 5 of these unique 27 last names appear at least 3 times.
I'm looking for the formula that returns 5.
And (like always), for simplicity and sharing reasons, I'm hoping to find a single formula that occupies a single cell, and does not rely on additional columns of intermediate information.
View 6 Replies
View Related
Jan 10, 2008
I work at a call center, and I need to find the average duration of time our employees spend on the phone. Here are some of the call times:
0:00:00
0:00:01
0:00:02
0:00:03
0:00:04
0:00:05.......
How would I find the average call time of these calls? When I use the formula =AVERAGE(Num1:Num2) I receive a # DIV/0 error.
View 3 Replies
View Related
Jul 31, 2012
I have a range A3:E70 where A3:E69 have the same formatting and the text in A70:E70 is bold. I want to copy-paste the entire range a number of times with a for ... next-loop. Actually, it's kind of a template system. I make the template A3:E70 and uses it a number of times.
View 2 Replies
View Related
May 22, 2007
I am trying to subtract from a collumn 14 seconds from the time that is in the cell. I do not want to manually enter in a formula, or copy and forula into the cell as there is a large amount of data for this. The report will be updated daily and will need to always subtract 14 seconds from the time, and the result should be populated in the cells that the time is subtracting from.
View 6 Replies
View Related
Oct 9, 2007
Want to enter 6 digits for each cell in a range of cells with VBA mask change to time format hh:mm:ss for each cell when entered. Code below does this for hours and minutes but I haven't been successful in modifying to work including seconds.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim vVal
If Target.Cells.Count > 1 Then Exit Sub
If Intersect(Target, Range("A1:A100")) Is Nothing Then Exit Sub
With Target
vVal = Format(.Value, "0000")
If IsNumeric(vVal) And Len(vVal) = 4 Then
Application.EnableEvents = False
.Value = Left(vVal, 2) & ":" & Right(vVal, 2)
.NumberFormat = "[h]:mm"
End If
End With
Application.EnableEvents = True
End Sub
View 3 Replies
View Related
Jan 7, 2008
I am trying to get rid of some duff data by running a comparison to a fixed value on a defined range. However, the macro tries to compare the cell value (00:05:00) as a decimal value.
I think I need to use the format function to get round this.
For Each timecheckcell In range("g3:g60")
timecheckcell.Value = Format(MyTime, "h:m:s")
If timecheckcell.Value <> "00:05:00" Then timecheckcell.Offset(0, 1) = ""
Next
View 9 Replies
View Related
Feb 1, 2014
I am trying to capture data for statistical analysis, but have hit a snag. As shown in attached sheet I have each day for the year broken down into hour time slots into which data will be added. As I will need to come up with a number of similar sheets in the future I was wondering if there is a way to automate through vba, a quick way to copy down the hour slots for each day, 365 times, rather than the laborious task of copy and paste manually.
View 5 Replies
View Related
Mar 31, 2014
I have the following data in one "Project_list" tab:
Project
AAAA
BBBB
CCCC
DDDD
I want to copy this data into another tab "Transpose" in this form:
AAAA
AAAA
AAAA
AAAA
BBBB
BBBB
BBBB
BBBB
[code].....
So basically copying 4 times every row... as simple as that The constraint: I have about 1500+ projects in the project list, but this list can change so i need a statement that copy values 4 times till source tab has empty values. I would like to have in the second column the following serie for each project.
AAAA Q12014
AAAA Q22014
AAAA Q32014
AAAA Q42014
Note- i want to do this in VB not though formulas as i am doing other derivations in macro.
View 4 Replies
View Related
Oct 9, 2007
I have a range of cells that is 10 rows high. I want to copy and paste this range 11 times while identifying each of the 11 copies of the range, such as; 02,03,04...12.
Please see attachment for an example of what I am trying to do.
Does anyone have an idea of how this might be done in VB?
View 3 Replies
View Related
Jan 8, 2008
Is it possible to have the user inputing a value in cell $G$8 and have the range B11 to G11 to be copied x time depending the value of Cell $G$8 down. ie: Value is 5, it will be copied on 5 rows under B11 to G11??
View 3 Replies
View Related
Jul 5, 2014
I have a table listing certain values (Column C) and their respective probabilities, based on normal distribution (Column D). As these probabilities are dependant only on values from Column C, I'd like to list all the values from that column into another fragment of the sheet, say F6 and below, but each value should appear there only once, no matter how often it occurs in its original Column C (I listed them manually in Column F in the enclosed example). Moreover, if a new value appears in Column C, it should be also included in the new place and sorted in increasing order.
View 7 Replies
View Related
May 5, 2008
I will say exactly what i want.
I want to keep statistics of roulette.
More specifically, i want to count how many times a dozen lates to come.
The range from 1-12 is 1st dozen, from 13-24 is the 2nd and 25-36 is the 3rd.
I want to count among these numbers, how many times one of three dozens appear every 1 time, how many times appears every 2 times, .... until 20 times.
For example: I have put in a column 500 numbers from 0 to 36.
The output must be like this:
1st Dozen: Every 1 time: x
Every 2 times: n
Every 20 times: m
The same for 2nd and 3rd dozen.
View 9 Replies
View Related
Nov 17, 2012
I have a list of names in C1 down that I want to count. There could be hundreds of names in C1 and I don't want to sumif all of them. There must be a simpler solution
View 1 Replies
View Related
May 13, 2014
I have various start times for employees.
I need to find out the total movement in start times per week for the employees.
I have used MIN and MAX to find the earliest and latest start times, and then a subtraction to find the difference.
This works brilliantly until my employees who start around midnight.
If they have started before and after midnight, it takes midnight as the earliest time and 23:00 as the latest, giving a difference of 23 hours instead of 1 hour.
i.e.
Start Times
23:00, 23:15, 00:15, 00:30
Range of Movement
00:30 - 23:00 = 01:30
I've tried, =$B$9+($C$4>$B$9)-$C$4 but this does not work when the MIN reads 00:00.
View 2 Replies
View Related
Sep 30, 2013
I have a rand () which provides me a different number upon calculate. I would like to run a loop for 1000 times and take the value and copy and paste in a range.
The below sorta works, but at times it stops or doesn't work at all. I have a loop for the counter and the for each to place the value into the cell and have it run over and over and placing the value in the next cell underneath. I have the counter at 10 so I dont get stuck in some endless loop before I know it works.
Code:
Sub montecarlos()
Dim MCs As Long
Dim c As Range
Dim lCount As Long
Dim lNum As Long
lCount = 0
lNum = 1
Worksheets("MonteCarlo").Activate
[code].....
View 6 Replies
View Related
Jun 11, 2008
I've taken data from a fixed-length text file and the records are identified using the first two characters on each line of the text file. I've managed to identify these in each row with other bits of code so that was fine.
Now, I have 56 string variables (identifying my record types), which I'm assigning into an array. Then, I want to go through each variable in the array, performing the same action by way of a For Next Loop where, by taking this particular RecIDNo (see my code) string variable I will get the code to copy/paste the data into the relevant worksheet (where later on I will apply a text to columns using another array). But first, this set must work before I can do that! To avoid confusion, note that the record types i.e. 01 through to 56, will be filtered, then copied into the corresponding worksheet with the same number.
The problem I'm getting is the autofilter I'm applying, then the array I'm trying to reference (to avoid repetitive coding!) doesn't work as the code doesn't compile (I've not worked a lot with Arrays but I'm learning all the time!)
Option Base 1
Sub test()
'The array is declared here:
Dim RecIDNo(56) As String
'The arrays are assigned the string variables below:
RecIDNo(1) = "01"
....
RecIDNo(56) = "56"
'This worksheet contains my data:
Sheets("DATA").Select
For RecIDNo(1 To 56) '<--I THINK THIS IS WHERE I'M GOING WRONG!!
'Filter and select arrays:................
View 2 Replies
View Related
Feb 6, 2012
I want to count the number of times a word appears in a range (like M9:S663), but sorting it by the month it appears (eg: january = 2, february = 56, march = 2000, etc.)
I managed to do this but there has to be a better way
=COUNTIFS(RNM.1;"PRUM Transcripcion";FechaComite;">=01/01/2012";FechaComite;"=01/01/2012";
FechaComite;"=01/01/2012";FechaComite;"=01/01/2012";FechaComite;"=01/01/2012";
FechaComite;"=01/01/2012";FechaComite;"=01/01/2012";FechaComite;"
View 1 Replies
View Related
May 30, 2009
I have the following table:
Month / Year / Value
JAN20060,73
FEB20060,76
MAR20060,76
APR20060,76
MAY20060,73
JUN20060,69
JUL20060,69
AUG20060,73
SEP20060,76
OCT20060,75
NOV20060,74
DEC20060,72
JAN20070,67
FEB20070,68
MAR20070,71
APR20070,75
MAY20070,75
JUN20070,74
JUL20070,71
AUG20070,68
SEP20070,67
OCT20070,7
NOV20070,73
DEC20070,75
I want excel to multiple the values in a specific range.
For example:
I will give 2 dates: MAR 2006 and MAR 2007. Excel should multiple the value 0,76 and 0,71. It's simples because is 2 months. But I have a lot of months (2006 until 2009).
So I would give MAR 2006 and MAR 2009 and excel should multiple the values from MAR 2006, 2007, 2008 and 2009. All the values in the range, but only for March.
The month will never change between the first and the last date.
I think on using VLOOKUP. Then I have the first value and the last one. But how can I tell excel to multiple the range?
The ideal will be a VLOOKUP that returns the ADDRESS of the cell, not the value. But I didn't see this possibility.
View 11 Replies
View Related
Apr 8, 2014
I'm looking for a formula that will calculate the difference in times between specific times while working with a 24 hr clock. Please see details below:
E3 provides the start time of 4:00
H3 provides an end time of 15:30
If an employee works betwen the hours of 0:00 (midnight) to 5:59, this is considered DIFF hours and is therefore the number I am seaking. So for the data noted above, the total DIFF hours worked is 2 hours.
View 7 Replies
View Related
Jul 28, 2014
need to understand the easiest way of highlighting the highest and lowest number in a range of cells several times in the same column.
As I said the cell range will be in the same column. So highlight the highest number green and lowest number red in cells a3 to a9 and then repeat the same process again in cells a11 to a17 and so on.the cell references are an example.
So I have several separate sets of numbers in the same column.
View 3 Replies
View Related
Jul 30, 2008
I am trying to extract the number of times a name appears on a certain range of cells on a worksheet, now I can get this to work, but I am sure there is a better way I just cant get it to work!
=SUM(COUNTIF(sales1!$B$8:$F$11,A18),COUNTIF(sales2!$B$8:$F$11,A18),COUNTIF(sales!$A$8:$B$11,A18))
I have only used 3 pf the worksheets, but in time there could be up to 30.
View 4 Replies
View Related
Dec 7, 2011
How would I go about counting the number of times TA shows within strings of text in a range within a sheet. Example: TA,MH in cell A2, CB,TA in cell C40, ES,TA in cell Q19. Result would be 3. Ideally, I'd like the formula to reference a cell that has TA as the look up data such as in A1 I'd have TA.
View 4 Replies
View Related
Mar 7, 2009
I need a formula in excel to convert start times and end times and minus out lunch time taken and then give total hours worked. For instance,
Column D Column E Column F Column G
Start End Lunch Total Hours Worked
10:01AM 7:08PM 1:01 (formula to convert hours worked)
View 9 Replies
View Related
Oct 13, 2008
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
View 4 Replies
View Related
Aug 20, 2013
I have a large amount of data and I'm trying to count how many unique values I have in one column. I also want to know how many times each duplicate appears. I tried using a pivot table but it's not working for me.
I also tried the following formula: =SUM(IF(FREQUENCY(H:H,H:H)>0,1)) but it's not quite working.
View 9 Replies
View Related
May 28, 2014
I am trying to come up with a macro that selects values from one sheet and inserts them into another sheet. The number of values will change each time based on the user's entry, as well as the number of times that each entry should be pasted.
For example:
Entry: X | Y | Z
Number of Times to be Inserted to New Sheet 3 | 2 | 1
Result:
X X X Y Y Z
I have spent a while trying to figure it out, however the best I can come up with is using an array, but I can only get one value from the array to paste multiple times:
(*Note: In my testing, I didn't insert into new sheet or set up the array to handle different values, I was just trying to get the basic idea to work)
Dim A(1, 3) As Variant
A(1, 1) = Range("C3").Value
A(1, 2) = Range("D3").Value
A(1, 3) = Range("E3").Value
[Code].....
View 3 Replies
View Related
