UDF 2 Ranges - How To Use First Cell Of Both Ranges And Then Go To Next Cell
Feb 3, 2014
I'm trying to create a Formula where the User has to select 2 Ranges and then a calculation is done for each corresponding cell.
I thought about using arrays or ranges but I'm quite lost.
[Code] ....
My Second approach would be to use Arrays
[Code] .....
This is what I thought about so far but it does not work. I guess because I have to Idea how to tell VBA to use the Interestrates Range for each corresponding cell.
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
if I have a range, say 33-35, I want to put a value into a cell and compare it to that range. It will set another cell to a certain value, based on the range.
i.e. if (35 > A1 > 33) A2 = B elseif (37 > A1 > 35) A2 = X
I'm working on a project whereby ranges of values are "scored".
The current layout shows ranges of within cells, and a hidden row with single values for the formulas to utilize. This means that whenever ranges are adjusted, the singles values also have to be changed.
I've attached a portion of the spreadsheet as an example.
Is there a relatively simple way to have the formula recognize the ranges as values and "score" accordingly?
If there is, can this be used for both ascending and descending ranges?
I should add that the ranges are not always percentages.
I would like to add another step that pastes the formulas copied from the active sheet, to specific ranges of cells.
I would like the PasteSpecial XlFormats to apply to all cells on the active sheet, where as the PasteSpecial xlValues would only apply to all cells not in the ranges that the Formulas are getting pasted into.
Also for formatting purposes I have a few cells that are merged in the active spreadsheet, that unmerge when I run the macro. Ideally I would like any previously merged cells to stay merged once the macro is run.
Below is the VB I have...
VB:
Sub SaveSheet() ActiveSheet.Copy With ActiveSheet.UsedRange .Copy .PasteSpecial xlValues .PasteSpecial xlFormats
The table below has three rows and 7 columns. Row 3 shows cumulative sums of the values in Row 2. Sometimes, Row 2 may not have values (not even a 0). The formula for C3 is =SUM(B2:C2) and =SUM(B2:G2) for G3. The challenge is that I have a very long row and summing it individually would be inefficient.
Is there a way of automating the formula so that the cell ranges expand automatically which I could use to fill to the right?
A BCDEFG 1Row 1123456 2Row 21041503 3Row 3115202023
So I have a spreadsheet with a list of companies, list of users within those companies, and the status of those users(Active/Inactive/Deleted). I'm trying to determine the company-level status based on how the overall status of all the users in the company.
E.g.
Code: A B C D Company A User 1 Active Company A User 2 Active Company A User 3 Inactive Company A User 4 Deleted Company B User 1 Inactive Company B User 2 Active Company B User 3 Inactive In the above example, cells D1 to D4 would list "Active", since Active users form the bulk of the company. D4 to D6 would list "Inactive" for Company B. I'm trying to use a formula to automate this for the whole spreadsheet (5,000+ rows)
I've figured out the first half of what I need to do:
My problem is in getting Excel to automatically define the cell ranges according to the cells that contain "Company A", "Company B", etc. I have over 5,000 rows on the spreadsheet so having to manually change the cell ranges for each company would take forever.
I am trying to delete all data between two ranges by Macro. Range one is called Title and range two is called disclaimer. I simply want to delete all data between them and insert new data ( again between them) The deleted and inserted will always be of varying sizes. All data sits in columns "A:H"
I have a sheet composed of daily sales. Within this sheet I have averages and totals automatically calculated for each week. I would like to set up a cell that keeps a running total of sales for the entire year as they are entered. I can set up the formulas for each week grouping and they work fine, but I can't seem to get it right for the entire sheet. Here are the formulas:
=sum(b2:g27) =sum(j2:o27)
These formulas work fine by themselves, but when trying to write one formula to calculate the total for both cell ranges I keep getting errors. I just want one formula to calculate the running annual sales as they are entered. I know I'm missing something simple here, but I don't know what it is.
I need to run a formula each month which calculates the ‘product’ for a range of cells in a column, where the cell range will change each month. The starting cell for the range is static, but the range end will always change - additionally, the last valid cell will always be followed by a null value cell. The attached example shows the basic format of my data – a range of values, by row, which will always end with a null value cell. The formula I’m using (to match my example) is: =(PRODUCT(A10:A13) –-> and I want to display the result in cell C10.
While I’ve been able to identify the ‘ending good row’ several ways, I haven’t been able to figure out what to do with this information – I seem be be lost in the translation of OFFSET values to CELL REFERENCE values. Has anyone encountered this specific scenario and found a solution?
In the attached file I have three merged ranges, A3:C3, D3:F3 and G3:I3.
I would now like to create a formula in each cell in row 1 that will return the date in the corresponding cell in row 3. E.g. A1:C1 will each have the date in merged range A3:C3, etc. The merged ranges in row 3 may not all be three columns wide so any way to extract the dates to row 1.
Columns in Sheet 1 are the following: company PERMNO number, dates, market capitalization (no data in this one)
Columns in Sheet 2 are the following:
company PERMNO number, ticker, dates, market capitalization
In Sheet2, there is a whole range of dates (between 1990 and 2004) for every single company, whereas in Sheet2 there is one or 3-4 dates for a every single company.
I would like to match the exact date/dates in Sheet1 in the range of dates in Sheet2 and then if they match, copy the corresponding cell value from the market capitalization column in Sheet2 to the empty market capitalization column in Sheet1. I also want that the company PERNO numbers match.
In short: if PERMNO numbers match, match the date/dates in Sheet1 within the range of dates for the same company in Sheet 2 and copy the market capitalization value to Sheet1.
Example:
Sheet1: A B C 1. PERMNO DATES MARKETCAP 2. 13123 199803 3. 13123 199904 4. 65456 200005 5. 44550 200104 6. 44550 200211......
way for excel to automatically identify ranges given the first cell of an array.I guess the concept is simple:
Lets say given A1 is the top left corner then excel should look the offset columns for values and/or formulas,when nothing is found and a blank cell is found then that's the border column.Then same goes for rows,and when bootom row is found then the bootom right cell can be identified and array/range is found!
I have a very large spread sheet of about 20,000 rows. I need to output to a cell postcode ranges based on the Zone. Not all the numbers in the postcode zones are consecutive.
For the example below, the output cell for the DWN range would display like this: 0800-0801, 0804, 0810-0813
Each output cell postal range must be specific to each zone.
Is there anyway to do this without manually doing it? I would like to tell you I've tried this and that but I've never done anything like this before so I really don't know where to start.
I have forced the tab order of sheet. Unlike the example with the link, I have used named ranges instead of cell references in the array to order the tab sequence. (the named range are single cells and merged cells)
Force Tab Order Of Cells
Just like the author of the link, the sequencing works great but if I choose click on another cell (that is in the pre-determined sequence) it then takes me to the next pre-determined cell int he sequence.
I have tried the code the "shg" has suggested for merged cells to no avail. Maybe it has something to do with the name ranges.
Dim aTabOrd As Variant Dim iTab As Long Dim nTab As Long
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
I have just started diving into the vast world of dynamic ranges and it's a bit overwelming. I have a dB of sorts that a listbox in a userform fills off of. The dB will be driven by column A and B. Column B are names that are displayed in the listbox. Column A is the class that these names belong to (3 classes). I need to develop dynamically named ranges of Column B based off of Column A. In other words, I need a dynamically named range for all of class1, class2, and class3 in column A to display column B in the listbox on the userform. I have attached an example to clarify the example.
=IF(ISERROR(IF(Search1="","No Place Found",INDEX(LocationsANDLocations2,MATCH("*"&Search1&"*",LocationsANDLocations2,0)))),"No Place Found",IF(Search1="","No Place Found",INDEX(LocationsANDLocations2,MATCH("*"&Search1&"*",LocationsANDLocations2,0))))
But its not finding anything on the second table, being LocationsTable2.
LocationTable is about 65500 rows, and next to it another row of 65500.
What is the best method of linking the them, so it can search for matched text in each cell, so it looks in LocationsTable then LocationsTable2 and so on.
How can I add multiple cells (ranges) to a listbox, and when the user clicks one, it will activate that cell in excell. I thought about have the list box for the text, and a corresponding array that holds the actual range or address, but I cant get it working.
Long version: I have a search feature that, when you type a name, it searches through a column and finds the name. Now if there are multiple matches to your string, I want it to add the full name to a listbox, and have the user pick one from the list to activate.
So basically, if I search for the name "john" but theres multiple people with that name ("john doe", "john smith", & "john mazz"), it would add the three to a list box, I would pick one from the list, and it would activate that cell.
I have everything done except that last part. I have it adding multiple matches to the list box, but I cant figure out an easy way to activate the correct cell when double clicking the item in the list. I could have it search again for the selected full name, but there is likely to be a case where one person is entered twice.
I am using Excel 2007. I have a worksheet called January and I have a range of formatted cells in 'January' between B15:18 and BA15:18. Some contain formulas, others are just formated to size and or color. I want to copy and paste this range of cells (B15:18:BA15:18) to the next available unformatted or blank cell of the column of the same worksheet by pressing a button. I also need the newly pasted range to reset to their original formatting assuming data was entered before the button was pressed.
I would like to build a Macro to delete units (ex: 10V --->10) of two cell ranges that are not beside each other and eventually automate it to graph these two ranges because I will be running samples and have to produce a graphs for each sample.
I tried the code below, but I can't figure out how to include 2 ranges without deleting letters in other cells in in between the ranges.
for ex: I want to delete the non numerical characters in the two ranges C3:C1000 and H3:H1000 and graph these ranges.
I would like the following to occur in an excel spreadhsheet:
If in Sheet1 Cell M98 is manually highlighted in Yellow (Not conditional format) then on sheet 2 cell range M84:M76 will also be highlighted in the same colour.
Cell M98 colour will only either be blank (no fill) or Yellow. If M98 is blank then the cell range M84:M76 would also be blank.
How a single-cell formula to check that 2 transpose arrays are equal.
For example, A1:A5 are {1,2,3,4,5}
AND
B3:B8 are {1,2,3,4,5}
Is there an array formula in C3 for example, that will check (i.e. say TRUE) if corresponding ranges are true i.e. check in this cell that A1=B3, A2=B4,...A5=B8.
