i use it to arrange players for every hole during golf tournaments. The present sheet (that i have attached) will allow as few as 2 players per hole. i have been informed that it should not assign less than 3 players per hole. the math in the code needs to be adjusted so that it knows to always start with 3 somes and work up from there. i can do the math on a sheet of paper i just don't know how to code the math . the attached sheet is what a member on the forum previously did for me. i take no credit for it, i am not capable doing what this sheet does for me.
I have a monthly sales report with x amount of customers in a number of countries with an ABCDE mark. I have made a pivot table with ABCDE marks in rows and countries in Columns.
I have then grouped the countries into regions. Looks something like this: [URL]
If you can't see it look here: [URL]
Now my issue is that I have to compare many months of this kind of data to see movement. What I wanted to do was to display these changes but how do I do this without having to create 10 different pivot tables, and is there a way I can save the country groupings so I don't have to manually group the countries for every pivot table?
I have a sheet of data in groupings where the titles of the groups is in a row. For example: "Boys" in A7 with the names of boys in A8:A14 and "Girls in A15 with the names of girls in A16:A26. I want to sort by column G but keep the boys and girls separate.
see my attached sheet cotaining the following questions. in a day report sheet how should i count request matching the crateria of date and other conditions. in a monthly report a heavy conditional sum calculation which make slower sheets how can i make it faster.
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
I want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.
But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.
E.g
Large Parts Current Stock = 50
(enter in) Large Parts Used = 2
Large Parts Current Stock = 48
(Clear field where 2 was entered into Large Parts used) (Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
Column A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.
I am trying to come up with a formula that will count everything excluding 1 in one row, while looking at another row to determine the group. The attached example explains things a lot better.
I am going to have 2 formulas. 1 for the "Big" group and one for the "Small" The formula needs to look first at the column that has the group in it. Then it needs to count everything is column A excluding "Snake" And return the value.
I want to count from each cell that doesn't contain "0". So if cell C2=100, I want to be able to count the number g1*2 from that cell and return a value. But then I want to start another count from c5 to the number of g1*2 and then another count from c8 etc basically any cell that contains a value other than "0", I want to start a count from.
The point of this is that the half life will expire after that count, so I want to be able to add the drug levels on an ongoing basis until the count of the half life has been reached. But there will be further dosing along the way before this half life is reached and these values need to be added to the existing value until the half life expires.
I require a Formula to calculate the INTERVALS (the number of Rows between the LAST instance and the PREVIOUS instance in a column) between each individual occurrence of any designated PAIR of Numeric values (single-digit / double-digit) in the same Row of the Named Range "Results" and return each calculated INTERVAL result to a separate Column on the same Row of a New Sheet - starting with the most recent ( the LAST) occurrence.
For instance, each time 80 and 87 appear together in the same Row, return the INTERVAL by calculating the number of Rows between the LAST instance and the PREVIOUS instance in a column - locate when both Numeric values LAST appeared together and Count back to their PREVIOUS appearance together to get the required Count; i.e. count from the Row ABOVE LAST appearance to the Row BEFORE PREVIOUS appearance.
The results are returned to a chart / matrix layout: I have the criterion vertically and horizontally and they are referenced using the horizontal and vertical cell address that houses each criterion, and the results are returned across the Row of the intercept of the vertical and horizontal criterion. At some point both criterion values being referenced will be the same, can the Formula return empty text "" when this occurs?
Example Chart / Matrix Layout: Cell Ref. A2 and B1 criterion 80 and 80 Cell Ref. A3 and B1 criterion 81 and 80 Cell Ref. A4 and B1 criterion 82 and 80
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
I have a transactional data set with a line for each transaction and I am looking to count the number of documents (each contains multiple transactions) against criteria.....
It looks something like this.....
Column A Column B Document No Category 11000001 A 11000002 B 11000003 B 11000002 A 11000001 A
Is there anyway to do this without subtotalling for each document and then a count?
I have been using the wrong formula to count total entries in columns and only just found this error. The MAX formula in cell B4 is: =MAX($B$12:$B$36). If the all the rows are full within range F12:F36, then the MAX formula is fine to count the total within range B12:B36 (25) so I thought. But sometimes there are omissions between F12:F36. If there are 2 blank cells anywhere within F12:F36 for example, then B4 needs to show 23 respectively. In the sample WkBk B4 needs to show 8
I have a file where I want to count number of cells where the value is greater than 0. in the attachment, i just want to populate that count below the column indicated therein. So in the example, desired result is two.
I have a spreadsheet of over 15,000 lines of student information, sorted by student number. I want to count the number of rows which have a duplicate student number, up to 15 duplicates in a row, and show the total number of duplicates in a Separate Column. I.e.
I've been trying to use a Countif formula, but I found I had to use so many ANDs and ORs that the formula became too long. I don't know how to use programming code, only formulas in Excel. Is there an easier solution using some type of SUMPRODUCT code?
I'm a newbie to these forums, but I had a question that I couldn't find an answer to in the search feature. So, I joined and here I go....
I have a whole lotta data (nearly 600 "pages" of data) that I pasted into Excel. Unfortunately, it's formatted poorly and I'd like to make it nice and purty.
What I started to do was to create a 2nd sheet and then do an "=" and then click the spot with the 'group name' and then another "=" underneath it and then clicked the spot with the 'premium' info, etc.
After a couple of these, I figured that I could simply make a formula to help me out with it. Please see the attached screen captures for some detail on my issue.
Can someone help me create a formula or a way to count a certain cell and then 52 cells underneath it and display it?
In any case, what I have is a set of cells that may or may not be filled, and which frequently get changed around. As I need the data counted in a specific way for "shenanigans", I am... getting quite tired with having to manually adjust this whenever my co-workers decide to adjust something (and I have been told that throwing bricks at them until they stop is not a valid option).
Basically, I want to count the cells in a way so that for every time a cell is filled, a counter repeats the previous number before continuing the sequence.
I.e
Dog 1
Rat 1
[code]....
My issue is that I have no idea how to get this to count right. I know the theory of how I want this to work, but I just have no idea how to get it to function. The logic of how I want it to count is below, but, again, I just have no idea how to go about getting it to work right without manually typing in the counter, and without ending up with the code working wrongly when there's two filled cells at the top.
I need a way to find a value in a column which has one or more corresponding values in an adjacent column. Then take all of the corresponding values found and count all occurrences of the found values in another column. But I only want to count the entries if an adjacent column is not blank.
Not the easiest thing to describe. Starting to wonder if I need to think in reverse. I hope the attached example makes more sense.
I used Sheets(1).Cells(1, 1).Rows.End(xlUp).Count instead of UsedRange.Rows.Count in this code , but it didn't succed with me. Why and how to do that
Dim i As Long, j As Long j = 1 For i = 1 To UsedRange.Rows.Count Sheets(2).Cells(j, "a").Value = Sheets(1).Cells(i, "a").Value Sheets(2).Cells(j, "b").Value = Sheets(1).Cells(i, "b").Value Sheets(2).Cells(j, "c").Value = Sheets(1).Cells(i, "c").Value j = j + 1 Next i End Sub
I have a sheet here where I would like to have a table that counts all the categories in column A only if there is no corrsponding date in column B. So it will take each category and output the number of them that have a blank in the B column.
see attached example. I've tried various combinations of countif and isblank but it just doesn't seem to want to work for me.
