I have a sheet here where I would like to have a table that counts all the categories in column A only if there is no corrsponding date in column B. So it will take each category and output the number of them that have a blank in the B column.
see attached example. I've tried various combinations of countif and isblank but it just doesn't seem to want to work for me.
I am after a formula that will calculate the blank cells since the last cell with a value in it.
Eg. I'm putting the formula in Column AW and have values in AH & AR and want to know the number of blanks since the last value which should be 4 in this case. I will need to copy this from row 1 to row 1000.
Is there anyway to make this work without having to enter a specific range. For example I want to count the duplicates in column U, but don't want it to count blank cells.
Here is my formula right now, and it works, but it counts all of the blank cells in the row as duplicates. How can I stop that?
Id Name 1 dsf 1 sdfs 1 sdw 1 we 2 dsf 2 fds 2 3 saf 3 saf 4 fds 4 4 fds
I have then created a summary sheet, I want to count the values in column B (Name) for each Id (Column A) but I want to exclude the blanks. So my Summary page will look like this with the following results:
I have use for this function on varying ranges. I pasted my function as well as my call to it. PhasesActive is just a named range of 5 cells. I get an error... by ref argument type error. Something with the argument, do I have to name the worksheet the range is on?
Function RangeValueCount(Rng As range) 'The function to check if a range has more than one value marked for 'selection, ex: The phases choices
For Each cell In Rng If Not IsEmpty(cell) Then RangeValueCount = RangeValueCount + 1 End If Next cell End Function
Call RangeValueCount(PhasesActive) If RangeValueCount > 1 Then msg = "There appears to be multiple phases selected. Please select only" & vbNewLine msg = msg & "one phase at a time" MsgBox msg End If
Is there a function to count blanks in a filtered column? That is, if I filter a column to show the rows that are blank, can I use the subtotal function (or some other) to count the number of blanks?
I want to figure a class average for a test, but I have students that have moved. My Excel is automatically counting them as a zero. How can I program/tell Excel to skip any blanks rather than count them in the average?
I want to count blanks in a horizontal range (all in one row) that will change (dynamic range). The values in the range could be numbers or words. Some values may be added to the end, but there may still be some empty cells to the right of the last value. My goal is to count blanks in the range up to the last entered value, but no beyond that. As an example:
I am trying to make a excell spread sheet that will calculate my students averages for the year. I need to account for zeros in the coarse and I want this excel sheet to track the current average all year long . So I do not need to include my blanks in the average as I go. Also , how do I formulate my average accum to show this formula - Test scores, four of them count as 80% of the total grade. So each test is worth 20% / Lab 10% of total grade and homework is additional 10%. I downloaded the templete from MSN and have tweaked it to my liking except for the coding above. Please advise. I am a below par on Excel. My attachemtn is below of my templete. One note. the templete gave me the room to include 13 ros of homework - but I will not necessarily use all of them... I can make it one row for home work only ....
I have a simple pivot table that is types by state. I want to know how many types are in each state. In the attached image the answer for Alaska is 5, for Arizona 5, for Arkansas 1, etc. How do I get Excel to tell me that for each state?
I'm using Excel 2010. I have PowerPivot installed but really don't know how to use it yet.
the problem is that when both if statements are true i want it to get the row number, this is because table1 has blank rows (can not be avoided as the data is linked from a closed workbook)
i can see this works up until it meets the first blank row and i get #value error.
on table1 data exists on row 1,2,5 and 8 so my problem is getting the small function k to report these numbers?
I need to be able to count all the blanks in columns other than A but only until the last used cell in column A. I am using a formula right now that counts the blanks in column A until the last used cell but I don't know how to apply the range of column A to other columns like B and C. Here is an example of what I hope to accomplish:
Formula used in A1 that I need applied to other columns but with the range of column A
I am in desperate need of a function that will count a column of data where there are blanks and values based on a certain date that will also capture any data that is added after refreshing the table from Access. I have tried several functions but this is what I have: =(ROWS('TouchBack Detail'!$Q:$Q)*COLUMNS('TouchBack Detail'!$Q:$Q))+(COUNTIFS('TouchBack Detail'!$B:$B,'Nov TouchBack Summary'!B$1)). The result should be 3 but it’s including all other cells in the column that are not and should not be included in the refreshed table’s data (Table_TouchBack.accdb). I have attached the spreadsheet for review. The function is in cell B27 highlighted in yellow.
I have data in B4:B55 and need a formula to return a count of rows, including rows that are blank. However, there are hidden rows that need to be omitted from the count.
see my attached sheet cotaining the following questions. in a day report sheet how should i count request matching the crateria of date and other conditions. in a monthly report a heavy conditional sum calculation which make slower sheets how can i make it faster.
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
I want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.
But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.
E.g
Large Parts Current Stock = 50
(enter in) Large Parts Used = 2
Large Parts Current Stock = 48
(Clear field where 2 was entered into Large Parts used) (Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
Column A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.
I am trying to come up with a formula that will count everything excluding 1 in one row, while looking at another row to determine the group. The attached example explains things a lot better.
I am going to have 2 formulas. 1 for the "Big" group and one for the "Small" The formula needs to look first at the column that has the group in it. Then it needs to count everything is column A excluding "Snake" And return the value.
I want to count from each cell that doesn't contain "0". So if cell C2=100, I want to be able to count the number g1*2 from that cell and return a value. But then I want to start another count from c5 to the number of g1*2 and then another count from c8 etc basically any cell that contains a value other than "0", I want to start a count from.
The point of this is that the half life will expire after that count, so I want to be able to add the drug levels on an ongoing basis until the count of the half life has been reached. But there will be further dosing along the way before this half life is reached and these values need to be added to the existing value until the half life expires.
I require a Formula to calculate the INTERVALS (the number of Rows between the LAST instance and the PREVIOUS instance in a column) between each individual occurrence of any designated PAIR of Numeric values (single-digit / double-digit) in the same Row of the Named Range "Results" and return each calculated INTERVAL result to a separate Column on the same Row of a New Sheet - starting with the most recent ( the LAST) occurrence.
For instance, each time 80 and 87 appear together in the same Row, return the INTERVAL by calculating the number of Rows between the LAST instance and the PREVIOUS instance in a column - locate when both Numeric values LAST appeared together and Count back to their PREVIOUS appearance together to get the required Count; i.e. count from the Row ABOVE LAST appearance to the Row BEFORE PREVIOUS appearance.
The results are returned to a chart / matrix layout: I have the criterion vertically and horizontally and they are referenced using the horizontal and vertical cell address that houses each criterion, and the results are returned across the Row of the intercept of the vertical and horizontal criterion. At some point both criterion values being referenced will be the same, can the Formula return empty text "" when this occurs?
Example Chart / Matrix Layout: Cell Ref. A2 and B1 criterion 80 and 80 Cell Ref. A3 and B1 criterion 81 and 80 Cell Ref. A4 and B1 criterion 82 and 80
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.